REPAIRS / REPLACEMENT TO ROOF SHEET, FLOORING, PLASTERING, BRICKWORK, CHAJJA, JOINERY WK AND OTHER MISC B/R ITEMS IN VARIOUS MD ACCN OF TRG REGTS AND OTHER MISC UNITS IN WING III AREA UNDER GE NASIK ROAD

Amount

Taking up or down 25mm or 32mm dia tubes galvanized iron and connections & removing/ shifting to site/store incl cleaning for relaying/refixing height up to four storey complete all as specified and directed by Engineer-in-charge. Note :- 1. Rates quoted are inclusive of taking out bib taps,PVC float valves and fitting as per site condition.

All as per Item No.1.00 above but size 20 mm dia tubes.

All as per Item No.1.00 above but size 15 mm dia tubes.

Re-fixing only 25mm or 32mm dia tubes galvanized iron as directed incl renewal of threading/tread cutting at ends of GI pipes fixed/Concealed to walls or laid in floor and jointing including S&F new fitting such as socket, bends, elbows, union etc all as specified and directed. Note :-1. Serviceable GI pipes taken down in item No 01 shall be reused. 2. The rates quoted are inclusive of all new fittings required and cutting threading to existing pipe.

All as per Item No.4.00 above but size 20 mm dia tubes.

All as per Item No.4.00 above but size 15 mm dia tubes.

S&F 25 mm dia tubes medium grade galvanized with all fitting fixed/Concealed to walls, ceiling and laid in floor of including cutting, holes in concrete/brick wall/roof and making good if required height up to four storey bldgs all as specifed and directed by Engineer-in-charge.

All as per Item No.7.00 above but size 20 mm dia tubes.

All as per Item No.7.00 above but size15 mm dia tubes.

S&F 25mm Gun metal globe or gate valve cost copper alloy with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm dia cast copper alloy , Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F 125 mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engr-In-Charge.

S&F ready made PVC conection 15 mm bore 450 mm long with end brass nuts, screws and PVC washer complete all as specified and directed.

S&F 15 mm dia Stop valves fancy type,chromium plated screwed down,high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.

S&F in repairs vitreous china squatting patern "Orisa pattern" size 580mm x 440mm with trap white with intergral foot rest complete all as specifed and directed by Engineer -in-charge.

S&F in repairs coloured PVC valve less, syphonic action fushing cistern , low level, 10 ltr capacity with inlet, ball valve,, float, chain and pull and brackets complete all as specified and directed.

Taking down existing PVC/AC rain water , waste and vent pipe of any bore complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey (4th).

S&F PVC (SWR) pipes 110 mm dia. double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey (4th).

S&F PVC (SWR) bends 110 mm dia any radius.

S&F PVC (SWR) 110 mm dia vent cowl.

S&F PVC (SWR) junction single (single T) equal or unequal 110 mm bore.

S&F PVC (SWR) bends with access door 110 mm dia any radius.

S&F PVC (SWR) pipes 75 mm dia. double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey (4th).

S&F PVC (SWR) bends 75 mm dia any radius.

S&F PVC (SWR) 75 mm dia vent cowl.

S&F PVC (SWR) junction single (single T) equal or unequal 75 mm bore.

S&F PVC (SWR) bends with access door 75 mm dia any radius.

Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises.

M&L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6.

M&L for Non Skid ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for vitrified ceramic digital tiles (Superior quality) 10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes cement plaster 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished in skirting etc. cut out of tiles of area not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering 10mm thick in CM 1:4 as in backing coat on fair surfaces of brick wall.

M&L for glazed cermic tiles coloured size 350x250X7mm / 450x350x7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match laid over and including rendering 10mm thick in CM 1:4 as in backing coat on fair surfaces of brick wall.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth after curing period two coat of Ditachment DS shall be applied @2.50 Kg/Sm. The paste like consistancy like is made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 7 days curing, testing shall be done by flooding for 72 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement. 32mm dia and 500mm long GI Spout light grade shall be provided in all sunken slabs to drain off water. including demolition of cement concrete in sunken slab and filling of mass concrete 1:5:10 all as specified and directed by Engr-In-Charge.

Dismantling stone slabs and tiles of any thickness in floors, aprons etc. laid bedded and pointed in any mortar

M&L for 30 cm x 30 cm x 20 to 25 mm thick chequered tiles of rubber moulded with grey cement and pigment are polished, decorative set and pointed in neat cement sluurry in floors etc including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick. all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. (Stone slabs so provided shall be not less than 900mm in length)

Demolition of cement concrete in ground floors and pavings not exc.15 cms thickness (below or above GL.)

M&L for cement concrete type D-2, 1:4:8 (40 mm graded agg) in foundation, filling and mass cocrete and sub base etc.

M&L for rough finished shahbad stone slab 18-25mm thick incl, 15mm thick bedding laid and jointed & pointed in CM 1:6 all as specified & directed.

Dismantling water tanks and removing to store of capacity 2000 litres

Dismantling water tanks and removing to store of capacity 1000 litres

Dismantling water tanks and removing to store of capacity 500 litres

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layer hoisted and fixed in position of capacity 2000 litres including 20/25mm dia PTMT float valve complete set all as sepecified and directed

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layer hoisted and fixed in position of capacity 1000 litres including 20/25mm dia PTMT float valve complete set all as sepecified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layer hoisted and fixed in position of capacity 500 litres including 20/25mm dia PTMT float valve complete set all as sepecified and directed

Taking down Chowkhats with shutters ( without taking off shutters from the frames exc 1.5 Sqm each not exc 4 Sqm each

Taking down Chowkhats with shutters without taking off shutters from the frames (not exc 1.5 Sqm each).

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS suquare tube, suppling and fixing in opening as per specification and drawings .

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as directed by Engineer in-charge.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter (with provision of fixing mosquitto proofing in decorative fashion) of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple or fixed in alumium frames.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised

S&F 100mm size butt hinges stainless steel

S&F 150mm aluminium anodisd, barrel tower bolts of excturded section.

S&F aluminium alloy,anodised, sliding door bolt with hash, staple(bolt type) and fixing clip of sheet,cast over exturded sectionand fixing bolt and sliding bolt of exturded section or cast alumimium alloy and fixing 300 mm length

Resecuring without taking down of chowkhats or shutter steel or wooden window area not exceeding1.5 Sqm each including necessary repairs to hinges, welding and nut/bolts etc all as specified and directed. Note : building height up to four storey bldgs

Dismantling of steel ventilators/Windows any description and any size complete all as specified and directed.

S&F solid PVC frame of size 50 x 95 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS suare tube , with necessary arrangement for fixing of glass for louer type window / ventilator and additional PVC beading around the frame for fixing of wire mesh supplying and fixing in opening all as specified & directed (note :- Glazing / wiremesh shall be measure & paid separately).

M&L for 3mm thick sheet figured glass,pin headed type where is required in squares n.exc. 0.5 Sqm in each pane. Height upto four storey buildings.

Taking down aluminium window shutters of any description and any size.

Taking down aluminium door and window frame of any description.

Aluminium (minimum 50 micron powder coated) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Aluminium (minimum 50 micron powder coated) window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.), rollers, grip etc. complete all as specified

S&F 5.5mm thick sheet glass plain or tinted, ordinary quality, fixed in aluminium doors and windows.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple or fixed in alumionium frames.

S&F in repair 20/25 mm dia medium weight, aluminium powder coated of approved colour as in drapery rod complete all as specified and directed.

S&F aluminium powder coated brackets, of colour and design as approved suitable for curtain rods of 20/25mm dia complete all as specified and directed.

Demolition of brick work/stone work built in any cement mortar including coping.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius,built in cement mortar 1:6.

Taking down cement or cement lime plaster,any description on brick or stone walls,etc including racking out joints,hacking for key,scrubbing down with water,etc.

M&L for rendering 15mm thick cement mortar on brick masonry surfaces in CM 1:6 and finishing even and smooth without using extra Cement including sagol finish on plaster surface of internal wall.

M&L for rendering 5mm thick cement mortar on Ceiling surfaces in CM 1:6 and finishing even and smooth without using extra Cement.

M&L for applying two coats of oil emulsion distemper on walls including preparation of new plastered surfaces.

M&L for applying two coats of oil emulsion distemper on ceiling including preparation of new plastered surfaces.

M&L for rendering 15mm thick cement mortar on brick masonry surfaces in CM 1:4 and finishing even and smooth without using extra Cement.

M&L for applying two coats of cement paint over coat of priming with alkali resistant primer on walls including preparation of new plastered surfaces.

Supply and fix kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 750x750x200mm, duly assembled and fixed to wall with wall screws / fasterners all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings.

Dismantling wrought iron or mild steel work of any description such as purlins ofor roof and window guard bars.

Supply and fixing steel work in tubular or rectangular hollow section in rafters, purlins etc. and connected works complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Preperation of new untreated steel or iron surfaces of any description over 10cm girth or width, not otherwise described and two coats of synthetic enemel paint over a coat of red oxide, zinc chrome primer.

Taking down carefully existing bituminous membrane/tarfelt treatment any description and cleaning and making good damaged surface of roof ,parapet,facia etc in cement mortar 1:3/PCC 1:2:4 as directed by engr-in-charge where ever require.quotated rate shall be deemed to be inclusive of complete removal of swollen plaster and concrete wherever directed by engr-in-charge and removing rubbish out of defence land. Note: work is to be executed at any height and situation.

Demolition of concrete (unreinforced) of any description and in any position not otherwise secifically provided for.

Providing cement concrete type B0 1:2:4(12.5mm graded aggregate) in roof kerbs or mud stops,ridge, rounded or chamfered on edges.

M&L for rendering 15 mm thick(minimum) in CM 1:4 with intergral waterproofing compound (200 ml per bag of cement used) on roof surfaces,parapets,facias etc .curing as per standard eng practices. Note: waterproofing compound shall be measured and paid separately.

Supplying only integral water proofing compound ISI marked complete all as specified and as directed.

M&L for Waterproofing on roof including flashing and junctions of parapet,kerb, wall etc.as under :- (a) Laying a layer of APP based polymeric membrane,3 mm thick(minimum),weighing not less than 3.60 kg/Sqm prefabricated fire layer waterproofing membrane reinforced with polyester non woven fabric(weighing not less than 160 gms/sqm) shall be applied over compatible primer at 0.40 litre/Sqm of density at 25 degree Centigrade 0.87-0.89 Kg /Litre and viscosity 70-160cps or cold sticker, application of APP modified membrance shall be by torch application. The overlaps shall be minimum 150mm on the transverse direction and 100 mm on the longitudinal direction. (b) APP membrance,Primer and bitumastic aluminium paint and bitumen shall be of same brand. (c) For vertical surfaces i.e. parapets,wall etc. app membrane shall be tucked into groove and sealed with silicon sealant i.e. "Dowsil 789 weatherproofing silicon sealant" using gun. (d) Bitumen and aluminium paint shall be paid separately.

M&L for applying two coats of solar reflective bitumastic aluminium paint at the rate 0.15kg/sqm per two coats over exposed app membrane surfaces(old/new) including preparation of surfaces to the entire satisfaction of ground executives. Note: Make same as for app membrane.

Disconnecting existing tanks exc 250 n exc 500 Ltrs setting aside (or lowering if required) cleaning and removing all scale dirt,etc from the mouth of circulating pipes etc and hoisting if required,reconnecting and re-fixing in position. Note: work is to be executed at any height and situation.

Disconnecting existing tanks exc 500 n exc 1000 Ltrs, setting aside (or lowering if required) cleaning and removing all scale dirt,etc from the mouth of circulating pipes etc and hoisting if required,reconnecting and re-fixing in position. Note: work is to be executed at any height and situation.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 68,300.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/S SAMEER SUBHASH PATANI (BID ID -3107343)

MAHIMA CONSTRUCTION (BID ID -3101532)

M/S R.K.S. CONSTRUCTION (BID ID -3120664)

J Sams Contructions (BID ID -3109011)

Abhiraj Enterprises (BID ID -3108831)

Bidder Name

MAHIMA CONSTRUCTION

M/S SAMEER SUBHASH PATANI

M/S K. K. Construction

J Sams Contructions

M/S R.K.S. CONSTRUCTION

Abhiraj Enterprises