COMPREHENSIVE MAINT TO BLDGS OF GROUP V UNITS LOC AT GE 869 EWS 302 ASC SUP COY STN HQ MTN DIV PRO UNIT KV SCHOOL RSAPPS AND KOIRENGEI AT LMS

Amount

Schedule 'A'

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) exc. 1.5 Sqm but n.exc. 4 Sqm complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) area n. exc 1.5 Sqm complete all as specified and directed.

Taking down shutter of any description and removing frome site exc. 1 Sqm & n. exc. 2 Sqm each leaf complete all as specified and directed.

Taking down shutter of any description and removing frome site n exc. 1 Sqm each leaf complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 30 mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 2nd Class H.W. Skeleton shutter 35 mm thick open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered or rounded & rebated sash bars (of any nos) as spd in SSR Pt-I Sec 8 of Cl. 8.24.(a) as per specification complete all as specified and directed.

S&F 2nd Class H.W. Skeleton shutter 30 mm thick open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered or rounded & rebated sash bars (of any nos) as spd in SSR Pt-I Sec 8 of Cl. 8.24.(b) as per specification complete all as specified and directed.

S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factorymade solid pannel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with neat moulded plan colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on eithor side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet bedding and jointed together with solvenet cement, supply and fixing in the frame at site as per specification complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated wood surfaces of any description not other wise described over 10 cm with or girth complete all as specified and directed.

Taking down shutters of any description n. exc 1 sqm each including easing and adjusting and also refixing builder hardware as required including renewal of unserviceable screw and necessarry materials refixing shutter in same opening complete all as specifeid and directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each including easing and adjusting and also refixing builder hardware as required including renewal of unserviceable screw and necessarry materials refixing shutter in same opening complete all as specifeid and directed.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, one 5mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36mm nominal dia of wire & average width of aperture 1.40mm including good quality of bearing handle, locks, PVC rubber lining, rollers etc complete all as specified and as directed.

S&F aluminium powder coated ventilators/ louvers with parttially guaged shutter using 4 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue complete all as specified and directed.

S&F in repair aluminium anodised Hasp and staple 75mm , safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair 100 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and fix extruded aluminium alloy handles, 100 mm long fabricated type complete all as specified and directed.

S&F in repair 200mm aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.

S&F in repair floor door stopper of brass body and tongue with hard drawn steel spring with 140mm overall length of cover plate complete all as specified and directed.

S&F in repairs 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F in repairs 150 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and fix in repairs extruded aluminium alloy handles, 150mm long fabricated type complete all as specified and directed.

S&F in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and dirceted.

S&F in repair floor door stopper of aluminium alloy body and tongue with hard drawn steel spring with 150mm overall length of cover plate complete all as specified and directed.

S&F in repairs fancy type decorative Drapary rod of 20mm dia for window and doors with curtain rings and decorative doom holders fixed to wall with screw complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality & glazing with oil putty in squares n. exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F figured glass 3 mm thick, pin head type & glazing with oil putty in squares n. exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair door closer (aluminium extuded body section) hydreulically regulated, ,designation No 1 universal type, suitable for door shutters up to 701 to 850 mm in width and of wieght not more than 36 to 60 Kg complete all as directed.

S&F in repairs vitreous china European type wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat black closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity white in colour and PVC flush pipe 32mm dia complete all as specified and directed by Engineer -in- Charge.

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Complete all as specified and directed

S&F in repair PVC flushing cistern syphonic action type,10 litters capacity, low level white with inlet ball, valve, float and handle including bracket ,PVC Connection and flush pipe complete all as specified and as directed.

S&F in repairs plastic water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repair Vitreous china coloured Wash Hand Basin (Oval Shape) 580mm X 450mm fixed in repairs including 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brass CP waste fitting & 15 mm PVC connection pipe 450 mm long fixed complete all as specified and directed.

Supply and fix in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union fixed complete all as specified and directed.

S&F in repair for stop cock copper alloy CP screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed 15 mm bore complete all as specified and directed.

S&F in repair bib taps cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs 32/50mm dia PVC waste pipe for kitchen sink , WHB , Urinal etc complete all as specified and directed.

S&F in repairs Pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, but fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts to length 450 mm complete all as specified and directed.

S&F in repair Brass, Chromium plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fix in repairs brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

Taking down steel tubing and connections including cleaning for re-fixing or removal to store of 15 mm bore complete all as specified and directed.

Taking down steel tubing and connections including cleaning for re-fixing or removal to store of 20 mm bore complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair PVC (SWR) floor trap with grating with incl jointing to waste pipe fixed in cement concerete (1:2:4) diameter of outlet pipe 75mm complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius of 110mm dia. With oval and access door complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius of 75mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece (single ‘Y’) equal or unequal for 110mm dia PVC pipe complete all as specified and directed.

S&F in repair PVC(SWR) branch piece (single ‘Y’) equal or unequal for 75mm dia PVC pipe complete all as specified and directed.

S&F in repair for PVC (SWR) junction (single ‘T’) with access door for 110mm dia pipe complete all as specified and directed.

S&F in repair for PVC (SWR) junction (single ‘T’) with access door for 75mm dia pipe complete all as specified and directed.

S&F in repair for PVC (SWR) vent cowl suitable for 110mm dia PVC pipe complete all as specified and directed.

S&F in repair for PVC (SWR) vent cowl suitable for 75mm dia PVC pipe complete all as specified and directed.

Supply and fix in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of pipe 20 mm dia complete all as specified and directed.

S&F in repair sinks made of stainless steel of 1 mm thick kitchen sink with plug washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420 mm bowl size 410 mm x 330 mmx 160 mm complete all as specified and directed.

Dismantling Water Tanks & removing from site, capacity of tanks exc 250 litres & n. exc. 500 Litres capacity each complete all as specified and directed.

Dismantling Water Tanks & removing from site, capacity of tanks 500 ltr and n exc 1000 ltr complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections like ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube complete all as specified in SSR Part-I and as directed.

S&F in repair rotational moulded polyethylene water storage tank, ISI marked, 1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections like ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube complete all as specified in SSR Part-I and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, Capacity exc 250 litrs n exc 500 litrs, cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, Capacity exc 500 litrs n exc1000 litrs and cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F for exposed GI powder coated snap grid frame work for false ceiling of grid size 600X600mm comprising of wall /cleat angle of size 24X 38X0.70mm with 4mm dia GI providing 4mm thick 'E' board in ceiling with galvanised iron snap frame of 'T' Section 24x38x0.70mm wall/cleat angle 25x25x0.35mm thick and hanging with 2mm GI wire all fixed arrangement will be done as per manufacturer’s instruction complete all as specified and directed.

S&F 4mm thick ply wood grade BWR (type BB) fixed with nails to the timber frame work as in wall complete all as specified and directed.

M&L for RAJSHRI brand insulated PVC wall panelling consisting of PVC insulated panels having wall thickness of 2mm (+or -0.2) PVC sheet opf density 600 Kg /Cum Manufactured by an ISO-9001-2015 certified company, and the desired thickness of EPS ( Dependent on the insulation required) screwed into the wall using screws of adequate length. The screws shall be placed at a distance of 150mm and shall be 25mm from the edge of the insulated panelon all four sides of the panel. The PVC strips of 5mm ( + or - 0.25) thick PVC sheet of width 75mm feathered at the edges shall be stuck using solvent cement adhesive at the places where two panels are joined, so as to cover the screw of both panels, using solvent cement 900 heat bent strips of 5mm thick PVC sheets of width 75mm x75mm feathered at the edges shall be stuck at wall joints / pillars etccomplete all as specified and directed.

M&L for Second class hardwood Weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed complete all as specified and directed.

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour, pattern and size as approved, fixed with approved adhesive as per manufacturer’s instructions on horizontal and vertical surfaces etc. complete all as specified and as directed.

Material and labour for 4mm thick one side decorative group match veneer complete all as specified and as directed.

Dismantling of timber scantling 40 sq .cm and over in section,in any position complete all as specified and directed.

M&L for second class hard wood in scantling wrought, timber framed & fixed complete all as specified and directed.

All as per item No 84 here-in-above but except timber scantling complete all as specified and directed (NOTE: Seviceable second class hard wood obtained from dismantling under Sl item No 83.00 here-in-above shall be reused under the item)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, including one coat shop primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings ,any description and in any position complete all as specified and directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Galvanised, corrugated mild steel sheeting of 0.63mm thickness with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F galvanized plain mild steel sheeting of 0.63 mm thick in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed ) with grade of zink coating 275 complete all as specified and directed.

M&L for filleting in any position and to any shape, sectional area exc.25 but n. exc. 50 sqcm. In CM 1:4 including all mitres , stops etc complete all as specified and directed.

Demolition of brick work or stone/ boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass 'B' brick straight or curved on plan 6m mean radius built in CM (1:6) etc complete all as specified and directed.

M&L brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius built in cement mortar 1:4 using old size bricks as in half brick thick wall complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded aggregate) as in sub base/flooring/ paving complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 20mm graded aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 10mm thick plaster on fair faces of brick work or concrete surfaces (1:6) finished the surface even and Smooth without extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work in cement mortar (1:4) using water proofing compound @ 2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed. (Using Dimapur Sand) [Note: WPC will be measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 5 mm thick plaster on ceiling concrete surfaces as in CM (1:3) finished even & Smooth without using extra cement complete all as specified and directed.

M&L for three coat of white wash to newly plastered surfaces of on ceiling complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat alkali resistent primer to newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a alkali resistent primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed or bedded layer in cement mortar 1:6 for laying floor finish complete all as specified and directed.

M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.

M&L for coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed or bedded layer in cement mortar 1:6 for laying floor finish complete all as specified and directed.

Dismantling of stone slab in any description or thickness, laid bedded jointed in any mortar complete all as specified and directed.

Material and labour for Granite(of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

Material and labour for bitumen patches on roof sheet area n. exc 2 Sqm each patch to arised the leakage seepage complete all as specified and directed.

Taking down copper/ aluminium point wiring ie. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors etc complete all as specified and directed.

Material and labour for point wiring concealed type in existing concealed PVC conduit with 2 single core 1.5 sqmm (nominal area) FRLSH PVC insulated unsheathed cable, 1100 volts grade multistranded copper conductor cable with using new sunken type Pre - coated GI sheet pressed steel box including modular frame with cover plate for mounting modular switch socket etc incl all accessories and using single core 1.5 sqmm (nominal area) FRLSH PVC insulated unsheathed cable, 1100 volts grade multistranded copper conductor cable (In green colour) as in earth wire connected to common earth dolly complete all as specified and directed. Note : (i) The quoted rates shall be deemed to be inclusive of sunction boxes/modular cover plate and cutting chases in brick walls/pillars etc for concealing the depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the portion of point wiring at for covering / fix sunken boards/terminal boxes/junction boxes of any shape and size . (ii) Fittings like switches sockets regulators, lamp holders light fittings shall be measured and paid for seperatly of cencern item of Sch’A’. One light point controlled by one/way switch complete all as specified and directed.

One ceiling/exhaust fan point controlled by one way switch

One socket outlet 5 Amps 3 pin on same board with other switch

One socket outlet 5 Amps 3 pin on independent board with cable of 1.5 sqmm size complete all as specified and directed

All as per item No.116 here-in-above but with cable size 2.5 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistrand PVC insulated copper earth continuity conductor of size 2.5 Sqmm complete all as specified and directed.

All as per item No. 116 here-in-above but with cable size 4 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistrand PVC insulated copper earth continuity conductor of size 4 Sqmm complete all as specified and directed.

Material and labour for point wiring concealed type with 2 single core 1.5 sqmm (nominal area) FRLSH PVC insulated unsheathed cable, 1100 volts grade multistranded copper conductor cable in concealed PVC conduit (medium grade) of 20mm dia all as specified and directed with using new sunken type Pre - coated GI sheet pressed steel box including modular frame and cover plate for mounting modular switches, sockets and fan regulators etc incl all accessories and using one single core 1.5 sqmm (nominal area) FRLSH PVC insulated unsheathed cable, 1100 volts grade multistranded copper conductor cable (In green colour) as in earth wire connected to common earth dolly complete all as specified and directed. Note : (i) The quoted rates shall be deemed to be inclusive of sunction boxes/modular cover plate and cutting chases in brick walls/pillars etc for concealing the depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the portion of point wiring at for covering / fix sunken boards/terminal boxes/junction boxes of any shape and size . (ii) Fittings like switches sockets regulators, lamp holders light fittings shall be measured and paid for seperatly of cencern item of Sch’A’. One light point controlled by one/way switch.

One ceiling/exhaust fan point controlled by one, one way switch

One socket outlet 5 Amps 3 pin on same board with other switch

One socket outlet 5 Amps 3 pin on independent board with cable of 1.5 sqmm size complete all as specified and directed

One bell point controlled by one way switches complete all as specified and directed.

All as per item No. 122 here-in-above but with cable size 2.5 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistrand PVC insulated copper earth continuity conductor of size 2.5 Sqmm complete all as specified and directed.

All as per item No. 122 here-in-above but with cable size 4 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistrand PVC insulated copper earth continuity conductor of size 4 Sqmm complete all as specified and directed.

M&L for point wiring with two single core 1.5 sqmm (nominal area) FRLSH PVC insulated unsheathed cable, 1100 volts grade multistranded copper conductor cable and incl PVC casing and capping of suitable size fixed on surface all as directed with using new sunken type precoated GI/ pressed steel box/terminal boxes including modular frame and plate for mounting fittings/junction boxes incl all accessories and using one single core 1.5 sqmm (nominal area) FRLSH PVC insulated unsheathed cable, 1100 volts grade multistranded copper conductor cable as in earth wire connected to commen earth dolly complete all as specified and directed. Note : (i) The quoted rates shall be deemed to be inclusive for fixing the PVC casing caping to surface with using PVC of covering sunken boards /terminal boxes/junction boxes of any shape and size with 3 mm thick suitable GI screws and cup washers. (ii) Fititngs like switches, sockets, regulators lamp holders light fittings shall be measured and paid appropriate item of schedule ‘A’ One light point controlled by one/way switch.

One ceiling/exhaust fan point controlled by one, one way switch

One socket outlet 5 Amps 3 pin on same board with other switch

One socket outlet 5 Amps 3 pin on independent board with cable of 1.5 sqmm size complete all as specified and directed

One bell point controlled by one way switches complete all as specified and directed.

All as per item No.134 here-in-above but with cable size 2.5 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistrand PVC insulated copper earth continuity conductor of size 2.5 Sqmm complete all as specified and directed.

All as per item No.134 here-in-above but with cable size 4 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistrand PVC insulated copper earth continuity conductor of size 4 Sqmm complete all as specified and directed.

S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.

S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.

S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.

S&F modular Switch Socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.

S&F Bell push switch Modular type single pole one way 6 Amp 240 Volts complete all as specified and directed

S&F Modular step type regulator 120W, 2 module ,heavy duty, 240 volts complete all as specified and directed

S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.

M&L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type including one lamp complete all as specified and directed.

S&F in repair for submain wiring with single core 6.0 sqmm PVC FRLS insulated unsheathed cable multi stranded copper conductor drawn through and inclduing PVC casing / capping of suitable size with all fittings and fixing accessories on roof , walls, ceiling etc including 6.00 Sqmm PVC insulated unsheathered one core multistranded copper condutor earth wire complete all as specified and directed. (Note : Two run of single core cable and one run earth wire will be measured as one length)

S&F in repair for submain wiring with single core 4.0 sqmm PVC FRLS insulated unsheathed cable multi stranded copper conductor drawn through and inclduing PVC casing / capping of suitable size with all fittings and fixing accessories on roof , walls, ceiling etc including 4.00 Sqmm PVC insulated unsheathered one core multistranded copper condutor earth wire complete all as specified and directed. (Note : Two run of single core cable and one run earth wire will be measured as one length)

S&F in repair Concealed Galvanised (GI) metal flush Boxes Modular 3 module concealed including frame, cover plate and making good the disturbed surface by using white cement complete all as specified and directed.

S&F in repair Concealed Galvanised (GI) metal flush Boxes Modular 4 module concealed including frame, cover plate and making good the disturbed surface by using white cement complete all as specified and directed.

S&F in repair Concealed Galvanised (GI) metal flush Boxes Modular 6 module concealed including frame, cover plate and making good the disturbed surface by using white cement complete all as specified and directed.

Supply and fix in repair socket outlet, 3 pin, flush type, 5 Amps, complete all as specified and as directed.

Supply and fix in repair socket outlet, 3 pin, flush type, 15 Amps, complete all as specified and as directed.

S & F in repair 15 Amps Switch flush type complete all as specified and directed.

S & F in repair switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal 240 Volt complete all as specified and directed

S&F in repair switch socket combination 3 pin 16 Amp flush type complete all as specified and directed

S&F in repair switch piano flush type single pole one way 5 Amp 240 Volts complete all as specified and directed

S & F in repair switch piano flush type single pole two way 5 Amp 240 Volts complete all as specified and directed

S&F in repair modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.

S&F in repair modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.

S & F in repair modular switch two way 6 Amps 1 module 240 Volts complete all as specified and directed

S & F in repair modular bell push way 6 Amps 1 module 240 Volts complete all as specified and directed

S & F in repair modular socket outlet 6Amp 3 pin 2 module 240 Volts complete all as specified and directed

S & F in repair modular socket outlet 6/16 Amp 5 pin 2 module 240 Volts complete all as specified and directed

S&F in repair Modular step type regulator 120W, 2 module ,heavy duty, 240 volts complete all as specified and directed

S&F in repair Bell push flush type single pole 5 Amp 240 Volts complete all as specified and directed.

S&F in repair bell Buzzer, Ding Dong Type , AC 230 Volts single pole complete all as specified and directed.

S&F in repair Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F in repair of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type complete all as specified and directed.

Supply and fix in repair stepped type electronic fan regulator flush type, 230 Volt, 5 speed control complete all as specified and directed.

S&F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type white/warm with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F in repair sheet metal enclosure DB, TPN, IP 43 protection, double door, 240 volts, Vertical Type 4 way with copper bus bars suitable for mounting MCBs of minimum 415 Amps rating complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB’s distribution board, 240 Volts, 12 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door Type for breaking capacity 10 KA complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door Type for breaking capacity 10 KA complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door Type verticle for breaking capacity 10 KA complete all as specified and directed.

S & F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps 10 KA complete all as specified and directed.

S&F in repair MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F in repair MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F in replacement of MCB single pole and neutral 40 to 63 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F in replacement of MCB/ Isolator single pole and neutral 100 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F in replacement MCB Isolator four pole 80 Amp 415 Volts complete all as specified and directed.

M&L in repair for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion complete all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately)

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 100mm x 100mm x 50 mm complete all as specified and directed.

All as per serial item No.180 here-in-above but for size 175x100x50 mm deep complete all as specified and directed.

All as per serial item No.180 here-in-above but for size 200x150x50 mm deep complete all as specified and directed.

All as per serial item No.180 here-in-above but for size 250x200x50 mm deep complete all as specified and directed.

All as per serial item No.180 here-in-above but for size 350x200x50 mm deep complete all as specified and directed.

S&F in repair single phase electronic meters temper proof LCD display with polycarbonate cover 230 V,10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH Class 1 complete all as specified and directed.

S&F in repair of PVC conduit size 25mm Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed

S&F in repair LED light fitting mirror type with high out put diffuser 2 feet,10 watt 220 V AC decorative type white/warm with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as directed by Engr-in-charge.

S&F in repair LED lights fitting 1x 20W, 220V, AC decorative box type white/warm with driver, holder including LED tube light 20W connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by Engr-in-charge.

S&F in repair LED lights fitting 1x 20W, 220V, AC LED Batten with Opal Diffuser, IP20, Inbuilt Motion Sensor based Auto Dim/Brightness decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by Engr-in-charge.

S&F in repair LED builidng security light fitting 25 Watt 230 V, AC out door type with high pressure dia cast aluminium hosing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S & F in repair round/square shape 06 watt 220 volt AC resessed/surface mounted type white/ warm with high effciency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in repair round/square shape 12 watt 220 volt AC resessed/surface mounted type white/ warm with high effciency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in repair LED bulb Lamp 09/10 Watts Retrofit B22 holder type base wth polycorbonate diffuser and alluminiun heat sink complete all as specified and directed.

Taking down and dismantling of storage type water geysers of 25 ltrs capacity any type any make, any model, from its existing location, transportation to work shop for repairs and transportation back and reinstallation of geyser as per technical instructions and as directed by engr-in-charge and including the following:- (a) Dismantling complete geyser and carrying out complete overhauling i.e; disconnecting electric supply and opening the heating plate, inner assembly, descaling complete assembly including heating element or otherwise. Replacement of defective heating element inlet and outlet tubes and refixing the assembly with gasket of good quality and tightening the nuts properly, reassembling geyser with all safety devices as specified in technical instructions and as directed by Engineer -in- Charge complete. Notes:- (i) Spare parts, safety devices with its required accessories shall be measured and paid seperately .

All as per serial item No. 195 here-in-above but for capacity 50 ltrs complete all as specified and directed.

Supply only following spare parts of geysers 50/25 Ltrs capacity (197.01) Heating element 1.5/2 KW suitable for operation on 230V AC 50Hz

(197.02) Thermostat 40 to 90 degree centigrade varying capactiy for 25/50 Ltrs capacity Geyser.

(197.03) stainless steel flexible conneciton pipe with brass check nuts complete as per site requirement all as specified and directed by Engineer-In-Charge.

(197.04) Indicator lamp assembly for geyser complete all as specified and directed by Engr-In-Charge.

(197.05) Syphon assembly suitable for 25/50 ltr geyser complete including nuts and washer complete all as specified and directed.

(197.06) Geyser brass tank for 25/50 ltr geyser complete including nuts, washer, glass wool etc complete all as specified and directed.

S&F in repair 15 Amp plug top complete all as specified and directed.

S&F in repair earth industrial plug top for socket for industrial socket metal glad suitable for 16 Amps metal glad MCB DB complete all as specified and directed.

S&F in repair industrial socket metal glad suitable for 16 Amps 240 volts metal glad MCB DB complete all as specified and directed.

S&F in repair 4 sq mm 3 core flexible copper cable for maintenance of geyser, and cooling appliances complete all as specified and directed.

S&F in repair 23/.0076 sqmm 2 core flexible copper cable for maintenance of light/ fan etc complete all as specified and directed.

M&L for attending complaint of ceiling fan/exhaust fan/air circulator/ cabin fan such as hanging/dismantling/loose connection etc complete all as specified and directed

S&F in repair of BLDC fan driver suitable for any make , type & sweep BLDC ceiling fan complete all as specified and directed.

S & F in repair capacitor of 2.5 MFD of ISI marked complete all as specified and directed.

M&L in repair of rewinding of ceiling fans 1200/1400mm sweep, strip opening and removal of burnt winding wire, rewinding the fans with suitable size of heavy grade (ISI mark ) copper winding wire, duly providing leathoride sheets, cotton tape, insulation sleeves, varnish, etc 6 month waranty period shall given by the dealer/contractor after repair, complete as reassembling including taking down and refixing at site and shifting/transporting to wksp including testing complete all as specified and directed

M & L in repair of rewinding of Exhaust fan 300 mm sweep, strip opening and removal of burnt winding wire, rewinding the fans with suitable size of heavy grade (ISI mark ) copper winding wire, duly providing leathoride sheets, cotton tape, insulation sleeves, varnish, etc 6 month waranty period shall given by the dealer/contractor after repair, complete as reassembling including taking down and refixing at site and shifting/transporting to wksp including testing complete all as specified and directed

M & L in repair of rewinding Exhaust fan 450 mm sweep, strip opening and removal of burnt winding wire, rewinding the fans with suitable size of heavy grade (ISI mark ) copper winding wire, duly providing leathoride sheets, cotton tape, insulation sleeves, varnish, etc 6 month waranty period shall given by the dealer/contractor after repair, complete as reassembling including taking down and refixing at site and shifting/transporting to wksp including testing complete all as specified and directed

M&L in repair of fan bearing 6201/6202 of ceiling fan of any capacity any size complete all as specified and directed Note: Replacement of bearing to be carried out at E/M complaint cell at LMS only exceptional case where lathe work is required then only fan to be taken at workshop.

M&L in repair of bearing/bush of exhaust fan/cabin fan/air circulator of any capacity any size complete all as specified and directed Note: Replacement of bearing to be carried out at E/M complaint cell at LMS only exceptional case where lathe work is required then only fan to be taken at workshop.

S&F in repair exahust fan louvers of 300mm sweep with locking nut complete all as specified and directed

Manipur Steel Industries(INDIA)

M/S PRADEEP CONSTRUCTION

M/s Nongmaithem Construction

M/S Apple constructions

M/s CYBER DEN

MANI PRASAD GUPTA