123/W/EDC-I/SRE/2024-25

Amount

Detail of Work

Safe cartage of ST/ PCC poles up to 8.5/9/11/13 Mtr. from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends.(Dist.Up to 30 Km.)

Safely cartage of other complete line material / 11 KV XLPE cable / ABC cable (Except PCC /ST Poles) from ESC, SRE/ JE store to site of work at various sites including loading, unloading at both ends.( Dist.App. 0 to 30 Km.)

Safe cartage of 63/ 100 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 30 km.)

Safe cartage of 250 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 30 km.)

Safe cartage of Fuse Set from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 40 km.)

Providing of PG Clamp

Erection of single support on ST/ PCC poles up to 8.5/9/11/13 Mtr Long with complete fitting of all accessories of 11 KV/LT line. complete.

Erection of double Pole on ST/ PCC poles up to 8.5/9/11/13 Mtr Long with complete fitting with all accessories complete.

Fixing of 11 KV stay rods by digging of pits in block of 600X600X300 mm. & with nozzling of stay wire 7/10 SWG and fitting the same on the pole

Concreting of stay rod in ratio 1:4:8 with Ist class brick ballast with cement, sand

Providing and Fixing of Number Plate.

Earthing of poles by earthing rod

Providing of All type MS Clamp for ST/ PCC poles with nuts bolts made of new MS flat iron 50x6 mm.

Providing of J-Hook

Providing and fixing of nuts & bolts of various sizes.

Providing and fixing of Suspention clamp with I- Hook

Providing and fixing of Dead end clamp with I- Hook

Providing and fixing of Piercing connector Diff. size.

Fixing of 3 phase Distribution Box

Laying of LT Cable 1x25 sq.mm. from T/F to double pole.

Laying, lifting, Stringing, sagging jumpring & binding of ACSR Weasel Conductor for 11KV/LT Line including complete.

Safe installation of 63/100 KVA T/F on the double pole with complete fittings including making connections and commissioning.

Construction of plinth for installation of 250 KVA T/F of size 1.5x1.5x1.5 Mtr. made of 9" thick wall in all the four sides with 6" thick RCC top duly filled with sand & plastered 12 mm. thick in ratio 1:4 with cement & sand on outer surface of brick wall .

Safe installation of 250 KVA T/F on the Plinth with complete fittings including making HT connections and commissioning.

Laying and making connections of LT XLPE cable 3.5x240/3.5/150 sq.mm. from T/F to double pole

Providing and fixing of wire mesh fencing size 2.5x2.5x2.5 mt. grouting making frame of MS angal 35x35x5 mm and fixing four no. MS strip size 25x6 mmat equal distance in between the frame and fixing square mesh 50 mm square in each frame the fencing should cover all side of T/F with providing 1 No. door size 6’x3’ with sitakni & Dandala.

Safe installation of Fuse with complete fittings including making connections and commissioning.

Laying, lifting, Stringing, proper sagging ABC cable of size 3x50+1x35+1x16/ 3x95+1x70+1x16/ sq.mm. including fixing of all accessories.

Providing and fixing of Danger Board with clamp

Concreting of PCC/ST poles SP-55, 8.5/11 Mtr. long with cement concreting in bolck of 600X600X1500 MM. in ratio 1:4:8 with cement, sand and brick ballast size 1''x1.5'' with plinth.

Chemical Earthing of 250 KVAT/F

Off shooting of tree branches touching the 11 KV/LT line.

GYAS PAL CONTRACTOR (BID ID -5018173)

M/s Raj Kishor Contractor (BID ID -5016821)