SPECIAL REPAIRS TO BLDG NO T13, WOODEN FLOORING WORK AT DINING HALL AND ANTE ROOM AT BLDG NO 4 AND CERTAIN MINOR WORKS AT FORT AREA NAGPUR UNDER GE KAMPTEE

Amount

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in mortar complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling mild steel work of any description, not otherwise specifically provided for complete all as specified and directed.

Dismantling of brick work or stone/boulder masonary built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles complete all as specified and directed.

Dismantling of AC (Corrugated or semi corrugated etc) sheets in roof covering including ridges complete all as specified and directed.

Dismantling timber scantlings in frame work of 40 sq cm and over in section, in any position complete all as specified and directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 sqm on plan and not exc1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.

M&L for providing cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, mass concrete and fillings complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for moorum/ red bajri filling in floors or pavings, laid in layers not exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for broken stone or boulders of hardcore of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, etc complete all as specified and directed.

M&L for 2nd class hard wood in scantling, clean sawn and unframed timber complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tube conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8 mm thick, area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick sceed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x200x 7mm thick on vertical surfaces, set and jointed in neat cement slurry pointed in white or coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square or rectangular) polished, light shade, area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15mm cement screed bed in cement mortar 1:4 complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F mild steel work as in frame work such as grills and frame guard bars, in windows including securing bolts including all necessary drillings, bolting or riveting and rack including MS plate, angle iron etc and similar work complete all as specified and directed.

S&F 3mm thick glass sheet, ordinary quality & fixing with oil putty complete all as specified and directed.

S&F galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, in opening etc complete all as specified and directed.

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rails on other side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with sitable PVC sheet beading and joined together with sovent cement complete all as specified and directed.

S&F 2nd class hard wood for plain, solid, straight chowkats and frames wrought, framed, rebeated on the solid, rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed.

S&F 35mm thick flush shutter, solid core construction with block board and plywood face panels, commercial type both side complete all as specified and directed.

M&L for preparing surfaces of wood base material such as ends of posts back of chowkat etc, area exc 0.10 Sqm & not exceeding 0.50 Sqm.& treated with tar or coal-tar black paint complete all as specified and directed.

S&F for bands, supports or stay for rain water, clamps, hold fast, fan hooks etc and similar articles confirming to Fe 290 grade -E-165 complete all as specified and directed.

S&F 75mm size mild steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F 100mm size mild steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F aluminium handle of 150mm size, cast type, anodised complete all as specified and directed.

S&F in repairs aluminum tower bolt, 150mm long complete all as specified and directed.

S&F mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of old steel surafces of any description over 10cm width or girth & applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F GI framework for seamless ceiling of size 600mm x 600 mm comprising of hot deep galvanized powder coated perimeter angle 0.43 mm thick of size 24x24 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, main runner Tee section 0.4 mm thick with height 38 mm and cross Tee 0.3 mm thick with height 28 mm suspended from soffit at approx 1200 mm centre to centre with GI cleat and steel expansion fasteners, including drilling holes for 4mm dia GI wire suspender and clips etc complete as per manufacturer's recommendations complete all as specified and directed. Note:- (i) Ceiling boards shall be measured separately. (ii) The grid system shall be as per specifications of make as specified and directed.

M&L for non-asbestos designer fiber cement building boards of size 595x 595x 4mm fixed or laid/ inserted to GI frame work with screws/ clips as in ceiling laid flat or sloping complete all as specified and directed. Note:- GI frame work will be measured and paid for separately.

M&L for machine cut kota stone slab flooring 18-20mm thick over 15mm thick cement screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per item No 46 above but in riser of steps, skirting, dado and pillars including rendering 10mm thick in cement mortar 1:3 complete all as specified and directed.

M&L for use & waste of form work to sides of lintels, cantilevers etc complete all as specified and directed.

M&L for mild steel TMT bars of 6 to 8mm dia cut to length, bent to shapes required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bar of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m clear span complete all as specified and directed.

Hacking out old broken glass and S&F 3mm thick sheet glass, ordinary quality not exc 0.50 sqm in each pane and fixed with oil putty in squares etc complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing etc and making good, cutting exc 15cm but not exc 30cm girth complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanized with all fittings & fixtures, fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tubing, medium grade, galvanized with all fittings & fixtures, fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 15mm dia gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm, white, including waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including fixing of waste pipe complete all as specified and directed.

S&F in repairs vitreous china squatting pan, 'Orissa' pattern, of size 580 x 440mm, white, with integral foot rests complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 550 x 400mm including bracket and fixed to wall complete all as specified and directed.

M&L for waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 15mm bore pillar tap, brass, CP, fancy type for WHB complete all as specified and directed.

S&F in repairs 32/40mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F15mm bore bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm dia stop valves, brass C.P, fancy type complete all as specified and directed.

S&F PVC connections of 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs PVC flushing cistern low level, 10 ltr capacity with its complete accessories, fixed including connection to water pipe and seat complete all as specified and directed.

M&L for laying 150mm dia salt glazed stone ware drain pipes of grade ‘A’ and jointed in cement mortar and tested on completion, complete all as specified and as directed.

M&L for concrete bed to drain pipe of 150mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specifed and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling of fillets, rails, posts, rafter, purlin etc under 40 sqcm in section complete all as specified and directed.

M&L for 2nd class hardwood plain fillets bull nosed, splayed chamfered or rounded on edge exc 13 & not exc 25 sqcm, fixing with screws complete all as specified and directed.

M&L for 2nd class hardwood plain fillet bull nosed, splayed chamfered or rounded on edge exc 3 & not exc 6 sqcm, fixing with screws complete all as specified and directed.

S&F in repair 12mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.

M&L for 8.3mm thick laminated wooden flooring high density core, grade AC4 (As per classification EN 13329) (Valentino Series) advance high dencity click system fixed over rubber sheet cushioning as per manufacturer's instructions complete all as specified and directed.

M&L for polishing of wooden surface of any description, width or girth including cleaning and preparation with two or more coats of synthetic enamel paint complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/ loose soil complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the strating point complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of oil bound distemper over a coat of birla white wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint as primer complete all as specified and directed.

M&L for complete removal of existing treatment on wall, preparation of surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint as primer complete all as specified and directed.

M&L for brooming down surfaces of any description and applying one coat of white wash on old decorated surfaces of walls including preparation of surfaces, filling cracks and holes etc with mixture of white cement & fine sand in CM 1:3 complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of birla white care putty complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated & unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marking medium grade concealed in surface of wall/ceilling including FRLSH PVC insulated unsheathed earth wire with copper conductor of size 1.50 sqmm pressed steel terminal modular boxes sunk on wall for mounting of switches switch sockets fan regulator etc including modular white cover plate suitable for mounting modular switches, sockets, fan regulator etc complete all as specified and making good to distrubed surfaces for one light point controlled by one, one way switch. Note: Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, cieling roses and holders shall be connected to common earth dolly.

S&F switch, modular type, single pole, one way, 6 amp, 1 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F ceiling rose, surface type, 2/3 terminal, 5 amps complete all as specified and directed.

S&F LED baton fitting 2' length including drivers having energy consumption 9/11W, 230V, 50Hz, 6500K not less than 800 lumens prewired complete all as specified and directed. Make:- Philips Cat No Slimline 9W, Crompton Cat No LCTL-10-CDL, Surya Cat No SLE BT 10.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.49,807.00]

Vishwakarma Engineering Works

M/s B S Jain

M/s Rahul Traders

M/s DS Khekde

chronicle enterprises

Harsh Construction Company

Bidder Name

Harsh Construction Company

Vishwakarma Engineering Works

chronicle enterprises

khushal constructions

M/s B S Jain

M/s Rahul Traders

M/s DS Khekde