WBPWD/EE/JED/eNIQ12/2025-26

Amount

Supply and fixing 415 V 125 A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & f 3 nos DIN type HRC fuse. [Make:- L&T(Lauritz Knudsen)]

Supply and delivery 1.1 Kv grade LT cable PVC insulated XLPE Al./Ar. Cable. [Make: Gloster/Polycab/Mescab/Havells]

4 core 16 sq mm Al / Ar. cable for Tower AC .

4 core 95 sqmm AL/Ar. cable. (Panel to VTPN .)

4 core 240 sqmm AL/Ar. cable. ( Sub Station LT panel to Building panel )

Laying of cable from 4 core 25 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.

4 core 16 sq mm

4 core 95 sqmm.

Laying of one No. cable above 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

4 core 240 sqmm

Laying of one cable above 150 sqmm and upto 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand

4 core 240 sqmm

S & F of compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cableas below.

4 core 16 sq mm

4 core 70 sqmm

4 core 95 sqmm

4 core 240 sqmm

Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

4 core 16 sq mm

4 core 70 sqmm

4 core 95 sqmm

4 core 240 sqmm

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 6 way [Enclosure 607913] Incomer:- 415 V 4 Pole 125 A MCCB [Breakin Capacity 25kA/35kA]- 01 Nos Outgoing:- (i) 415 V 3 Pole 63 A MCB [Breaking capacity 10kA & C characteristics]- 02 Nos (ii) 4 Pole 40 A TP MCB [Breaking capacity 10kA & C characteristics]- 04 Nos [Make:- Legrand/Schneider/Seimens]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 4 sqmm + 1 x 2.5 sqmm for AC .

4 x 16 sq mm + 2 x 10 sq mm for TPNDB.

4 x 2.5sqmm + 2 x 1.5sq mm for connection of Tower AC.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.incl. with plug top.

Supply and delivery of 1.5 Ton caapcity Split A.C. machine fitted with Scroll/Rotary Compressor, Rated cooling capacity-5280 W, Rated power input-1390 watts, ISEER-5.15, Current drawn (Rated)-6.5 Amps, Fan speed control-5, Air flow-1010 CMH, Sound level (IDU)-30dB, wireless type remote control and both coil of IDU & ODU should be made of copper. [Make- O-General ASGG18CGTB-B (R32) or equivalent of Mitshubishi Heavy Industries / Mitsubishi Electric-MS/MU- AGZ18VF-KT or Voltas]

lnatailation, Testing & Commissioning of Indoor & Outdoor unit of above Hi wall split AC machine after making hole in wall etc as per direction of EIC including S&F of necessary fixing arrangement for indoor and outdoor unit (including Outdoor Platform), duly painted, laying and making connection of refrigeration pipe, power cable, drain pipe etc including supplying & charging the extra refregerant as required as per direction of the EIC.

Supply & Laying of 1. Electric PVC Unarmoured flexible copper cable (4 core 2.5 Sqmm) (Make : Finolex/Havells/Polycab) 2. Copper pipe 5/8" & 1/4" for suction as required and wrapping the copper refrigerant pipe line with 26 SWG aluminium sheet.(Make : Rajco/Royku) 3.Insulation Foam 5/8" & 1/4" thickness 0.9 mm with 9 mm thick nitrile insulation.

Supply and laying 20 mm UPVC pipe (Make : Finolex/Supreme/Ashirvad) for water drainage along with all fittings.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required - 65 mm dia

Supplying and fixing 240/415 V 63 A 4 pole MCB Isolator on din rail of existing DBs and necessary connection [Make-Legrand]

Supply and Delivery of 1000 A ,600 Volt AC power contactor (Make -ABB Cat No- SK827044-AL/EK1000-40-11).

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting 200 x 150 x 100mm

Supplying and Fixing PVC water proof looping cable box (size-200 x 250 x 90) mm with IP 67 protection having hinged Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. incl. provisipon for housing two/four pole MCB Isolator .(Make-SINTAX/Hensel)

Installation, Testing & Commissioning of 5.5 Tr. Floor Standing Tower type room Air-conditiner both indoor / outdoor Unit incl. fixing of supporting kits & mending good the damages.

SITC including vaccumiazation and Nitrogen for testing of following nominal size of soft drawn copper refrigerant piping for RAC system, complete with fittings, with adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XLPE class -O tubular insulation/with Class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness as given below for suction and liquid lines, all accessories as per specification etc. as required.

S&F 3/8" (9 mm) dia (Soft drawn) Cu. Pipes(As per standard BS864 or ANSIB 16.22) incl. 19mm thick insulation incl. S&F of 5/8" (15.88 mm) dia (soft drawn) Cu. Pipes (As per standard ASTMB-280,EN-12735 ) with tube thickness 1.0 mm incl.19mm thick insulation. S&F of 4 core round copper cable of 4.0 sqmm and PVC water drain pipe, insulation tape fastener etc as per direction of EIC.

S & fabrication of GI chair of 300 mm high suitable for indoor of 5.5 TR. floor standing AC incl. painting.

S & fabrication of GI chair of 600 mm high suitable for outdoor of 5.5 TR. floor standing AC incl. painting.

Carring charge of 5.50 ton tower AC machine from Jhargram Circuit House to the Newly constructed Administrative Building, Jhargram, incl. Loading & unloading by contactor own labour.

S& charging of R-410 gas for 5.5 ton tower AC machine.

Supply and delivery 1.5 sqmm. 'FRLSH' PVC insulated & unsheathed single core stranded copper wire.[90 Mtr/Coil] [Make: Finolex/Havells/Polycab/Gloster/RR/PWD approved as per choise of EIC]

Supply and delivery 2.5 MFD fan condenser. [Make: Tipcon]

Supply and delivery LED batten with fittings. [Make: Philips Cat No. BN308C-LED 40S-6500-L120 PSU WH S1 or equivalent of Crompton/Wipro]

CHAKRABORTY ELECTRIC (BID ID -6569708)

SREE KRISHNA ELECTRICAL (BID ID -6569975)

M/S JOGMAYA ENTERPRISE (BID ID -6582245)