Loading…
Loading…
Tender Value
₹30.3 L
EMD Value
₹60,700
Closing Date
7 Oct 2026, 4:00 pm
Rural Drinking Water and Sanitation Department
EXECUTIVE ENGINEER
Rejuvenation of 15 Number of Over Head Tanks(OHTs) in various Gram Panchayaths of Kapu Taluk in Udupi District
RWSSD/2026-27/WS/WORK_INDENT10641
RWSSD/2026-27/WS/WORK_INDENT10641
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
RWSSD Division Office Udupi
11 documents required · 9 mandatory · 2 optional
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Assessed available Tender capacity computed as per the formula in bid document.
Satisfactorily Completed as prime contractor, at least one similar work to an extent of 50% of amount put to tender value not less than Rs 15.17 Lakhs
List of works for which tenders already submitted
Existing commitments and on going work details not below the rank of EE or Equivalent
Tenderer should be a Registered PWD class-III and above contractor
Annual Turn over certificate, Annual Contract Receipts / profit and loss account, (Year wise value of civil Engineering works executed & payments received in last five years i.e. 2021-22 to 2025-26) issued by Chartered Accountant With UDIN No.
liquid assets and /or availability of credit facilities of no less than Rs .9.10 Lakhs (30% of cost of work) (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.
To qualify for award of this contract, each tenderer in his name should have in the last five years i.e.2021-22 to2025-26.(Achieved in at least two financial years an average annual financial turnover(In all classes of civil engineering construction works only) of amount not less than the Amount Put to Tender of Rs 30.35 Lakhs)
₹760
₹60,700
23 Sept 2026
23 Sept 2026
8 Oct 2026
29 Sept 2026
28 Sept 2026
Rejuvenation of 15 Number of Over Head Tanks(OHTs) in various Gram Panchayaths of Kapu Taluk in Udupi District
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not excee...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Providing and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm -C- section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle ...
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to RCC structures like floor and walls of reservoirs, sewe, effluent and water treatment plants,...
Providing Waterproof treatment to the cracks using 1 coat of bondcoat of SBR latex and Cement at the ratio 1:1 and then preparing Cement Mortar of 1:3 admixed with SBR latex at a dosage of 15% of Ceme...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cle...
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-...
Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied at 1.43 l/ 10 sqm) over existing cement paint surface including preparing the surface after t...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade(Vol 3, I.no. 8.3)
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(Vol 2, I.no. 5.4)
Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of nea...
Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and en...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Granular Aggregates. 20mm downsize(Common Sr Vol 1, Market rate of Common Materials Sl.no. 4)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kapu estimate absract.pdf
Others - estimate • 4.20 MB
kw-2_indent kapu oht repair.docx
Tender Document • 0.42 MB
ten 04 2026-27 paper notification.pdf
Others - paper notification • 2.68 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .