REPAIR TO DRAIN, PATH, RETAINING WALLS, COMPOUND WALLS, FENCING, BREAST WALLS AND GATES ETC OF RUPA, GACHHAM, BIRPUR AND DUKHAMPANI AREA AND WELCOME MAINT TO CERTAIN OFFRS MD ACCN AT RUPA AREA OF AGE B/R-II UNDER GE 859 EWS

Amount

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) with complete all as specified and directed by Engr-in-Charge.

Demoloition of cement concrete of any description and in any situation not otherwise specifically provided for with complete all as specified and directed by Engr-in-Charge.

Dismatling of mild steel work any description with complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation of RCC post or struts with complete all as specified and directed by Engr-in-Charge.

S & F mild steel post and struts in fencing including cutting tops to shape as swan neck drilling holes ,notching for wire etc.and flate iron fillets for securing wire mesh etc confirming to gde Fe 410-0 or Fe 310-0 complete as specified.

S & F in repaire for MS screw bolt(Machine made) with hexagonal or squre heads at one end and screwed the other or screwed both ends and dia of bolt 11 to 15 mm and length exc 5 cm n exc 10 cm long .

S & F in repaire for galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to angle fencing post complete all as specified.

Supply only chain link fencing mesh size of 100 x 100 mm of 4mm dia galvanised wire with complete all as specified and directed by Engr-in-Charge.

Fixing only chain link fencing incl line wire any mesh size and type of standrds rails, straining bolts incl provn of binding wire with complete all as specified and directed by Engr-in-Charge.

Mild steel Tie bars 10 mm dia.with screwed ends,nut, washers and mild steel plates for chain link fencing all as specified and directed.

M& L for preparation of new steel surface of any description exc 10 cm width or girth not otherwise described and applying Two coats of synthetic enamel paint over a coat of red oxide all as specified and directed

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)

M & L 75mm thick cement concrete type C2 (1:3:6) using (40mmgraded aggr.) as in sub base with complete all as specified and directed by Engr-in-Charge.

M&L for 20mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes with complete all as specified and directed by Engr-in-Charge.

M&L for Chequered cement concrete tiles 200x200x25mm etc. set and jointed and pointed in neat cement slurry in floor with grey cement and pigment all as directed.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in paving and spike rolling to surface or making impression of expended metal whilst the concrete is green with complete all as specified and directed by Engr-in-Charge.

M&L for 150 mm thick Cement concrete 1:3:6 type C2 using 40mm grade stone aggregate all as specified and directed.

M&L for 100mm thick Cement concrete 1:2:4 type B-2 using 40mm grade stone aggregate laid on floor, finishing cemnet concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for PCC Type B1(1:2:4 ) using 20mm grade stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges with complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced Cement Concrete of any description and in any position not otherwise specifically provided for with complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D2 using 40mm graded agg as in fdn filling and mass concrete with complete all as specified and directed by Engr-in-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions with complete all as specified and directed by Engr-in-Charge.

M&L in mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

Ditto per above but 5mm dia and over upto and including 10mm dia in stirraps, spacers and binder with complete all as specified and directed by Engr-in-Charge.

RCC nominal mix 1:2:4 Type B1 (20mm graded aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete

RCC 1:2:4 using type B1 (20mm graded aggregate) as in Columns, pillars, piers, posts and struts with complete all as specified and directed by Engr-in-Charge.

M&L for providig precast cement concrete in cover slabs using type B1 1:2:4 & setting in CM 1:6 with complete all as specified and directed by Engr-in-Charge.

Providing precast cement concrete louvres and jallies, 35mm thick (measured solid), in?cluding all mould- ings but excluding frame (Pre cast frame shall be measur?ed separately and paid for under item 04032) Set in cement mortar 1:4 Type C0 1:3:6 (12.5mm gdd aggr

M&L for fair finished flat form work to soffits of slab, n exc 200mm thick and similar items including edges with complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced Cement Concrete Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like with complete all as specified and directed by Engr-in-Charge.

Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete surfaces with complete all as specified and directed by Engr-in-Charge.

M&L Preparing new plastered surfaces and applying Two coats of cement base paint over a coat of white wash on surfaces of walls on plastered surfaces with complete all as specified and directed by Engr-in-Charge.

M&L Preparing newly plastered surfaces of walls and applying three coats of white wash with complete all as specified and directed by Engr-in-Charge.

M&L for Plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed.

Extra for fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds etc.

Add or deduct item no above for each 25mm inner girth or part there of over or under 30cm inner grith in cement concrete using extra cement including forms, moulds etc.

Taking down cement plaster on stone , brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

M&L rendering 15mm thick in CM 1:4 on concrete surfaces finished even and smooth with neeru finish using extra cement .

M&L rendering 15 mm thick in cm 1:3 on fair faces of brick work and concrete sufaces finished rough to receive granite for wall

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of gran with complete all as specified and directed by Engr-in-Charge.

Dimolition of brick and stone masonry of any description in CM with complete all as specified and directed by Engr-in-Charge.

M&L for walling of RR, uncoarsed, well bonded bedded & solidly hearted built in cement mortar 1:6 with complete all as specified and directed by Engr-in-Charge.

Extra over stone walling for hammer dressing to face stones & dressing to face beds and joints as specified at RR walling uncoarsed or brought upto coarse, max depression on face from straight edge held against the dressed surface n.exc 20 mm granite or trap stone.

M&L for raised pointing to RR, uncoarsed or brought upto course stone masonry in cement mortar 1:3 with complete all as specified and directed by Engr-in-Charge.

M&L for flush pointing to RR, uncoarsed or brought upto course stone masonry in cement mortar 1:4 with complete all as specified and directed by Engr-in-Charge.

Providing pre cast PCC bonders (for stone walling), type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 with complete all as specified and directed by Engr-in-Charge.

M&L for Hand packing(any thk)at back filling with broken stone or boulders with complete all as specified and directed by Engr-in-Charge.

M&L for providing cement concrete in coping type B1 1:2:4 (20 mm graded stone aggregate) in coping

M&L for PCC 1:3:6 type C2 block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:4 with complete all as specified and directed by Engr-in-Charge.

M&L mild steel work as in gate framed work of angle or other section with gusset plates braces etc complete

M&L for coloured machine pressed precast concrete interlocking tiles any shape and size, 80mm thickness, conforming IS, M-35 grade complete laid over sand filling in floor/footpath with complete all as specified and directed by Engr-in-Charge.

M&L for Sand filling under floors or in foundations including watering and consolidation with complete all as specified and directed by Engr-in-Charge.

M&L Preparation of old white washed surface of wall and applying one coat of whitewash complete all as specified and directed.

M&LPreparation of old white wash surfaces of ceiling and applying one coat of whitewash on ceiling complete all as specified and directed.

Material and labour for preparation of old distempered surface of walls including washing down and stopping of distempered surfaces and applying one coat of oil bound distemper all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation and applying one coat of cement base paint (colour and tint as approved) on walls etc complete all as specified and directed.

Preparation of old treated surface and applying one of varnishing finishing coat with synthetic varnish etc complete all as specified and directed.

Material and labour for washing rubbing down and stopping of distempered and painted surfaces applying two coat of oil bound distemper on wall all as specified and directed.

Demolition of wall and ceiling boards any type and thickness including cover fillets.

M&L providing 4mm thick 'E' board in ceiling with galvanised iron snap frame of 'T' Section 24x38x0.70mm wall/cleat angle 25x25x0.35mm thick and hanging with 4mm GI wire all fixed arrangement will be done as per manfraxture instruction including two coat of oil bound distemper and one coat of white wash complete all as directed

M&L in repair for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

M&L for 4 mm thick plywood, drade BWR, type BB, fixed with screws to timber frame work

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing).

M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient/ Bell/ Johnson/ Somany).

M&L 7 to 8mm thick( area of each tile exc. 0.11 sqm but not exc. 0.18 sqm) non skid colour ceramic tiles in floor etc. set and jointed in neat cement slurry and pointed in white cement to match the shade.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles .

M & L for 300 x 200 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient/ Bell/ Johnson/ Somany).

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar

M&L for precast cement concrete 1:3:6 type C1 using 20 mm graded aggregate block solid building blocks or slabs in not exc 10cm thick (with plain or interlocking joints as directed ) complete set in CM 1:4

Dismantling of CI/PVC, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings etc complete all as specified and directed.

Supply and fix for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply and fix for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) junction single , (single T) equal or unequal with access door complete all as specified and directed.

S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement.

Taking down 15mm bore GI tubing and connections complete all as specified and directed.

Taking down 20mm bore GI tubing and connections complete all as specified and directed.

Supply and Fix 15mm bore galvanised iron tube, medium grade, with all new fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed

Supply and fix 20mm bore galvanised iron tube, medium grade, with all new fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed

S&F in repair hand shower (health faucet) with 1 meter long easy flex tube in Chrome Finish and wall hook screwed down for 15mm bore iron pipe complete all as specified and directed

S & F in repairs chromium plated fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.

S & F in repair Angular stop valve 15 mm bore cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed, but fancy type with complete all as specified and directed by Engr-in-Charge.

S & F in rep vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified. (Make: Hindware /Parryware /Cera /Commander)

S & F in repairs PVC seat covers (white) closed pattern with flat bottom and cover and hinging device for EWS with complete all as specified and directed by Engr-in-Charge.

S & F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete. (Make: Hindware /Parryware /Cera /Commander)

S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers with complete all as specified and directed by Engr-in-Charge.

S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia with complete all as specified and directed by Engr-in-Charge.

Central hole basin mixer without popup waste system incl 450mm long copper pipe & Brass nails with complete all as specified and directed by Engr-in-Charge.

S&F 15 mm bore dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair for bath showers and kitchen sink with complete all as specified and directed by Engr-in-Charge.

S&F 15 mm bore dia brass 3-in-1, CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair for bath showers with complete all as specified and directed by Engr-in-Charge.

S&F chromium plated shower roses 125mm size, including fixing to steel pipe or union with complete all as specified and directed by Engr-in-Charge.

S&F for15mm stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed fancy type chromium plated with long shank and cup (concealed type)

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm.

Taking down shutters of any description not exc1 sqm each

Taking down shutters of any description exc 1sqm and n exc 2 sqm each

Taking down shutters of any description exc 2 sqm each

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete

S & F 2nd class hard wood plain framed panelled shutter 30mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick with complete all as specified and directed by Engr-in-Charge.

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc with complete all as specified and directed by Engr-in-Charge.

S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.

S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed

S & F 125mm size extruded aluminium alloy handles, fabricated type anodised

S&F floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor

S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed with complete all as specified and directed by Engr-in-Charge.

M&L for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples with complete all as specified and directed by Engr-in-Charge.

M & L for preparing new wooden surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Dismantling of water tanks exc 500 Ltrs & n.exc 1000Ltrs capacity and removing to store

Supply and fix polythene water storage tank of 1000 ltrs capacity rotational moulded (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position all as specified

Dismantling of water tanks exc 250 Ltrs & n.exc 500Ltrs capacity and removing to store

Supply and fix polythene water storage tank of 500 ltrs capacity rotational moulded (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position all as specified

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.

M & L 10 mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement in walls with complete all as specified and directed by Engr-in-Charge.

S&F in repair drapery rod 30mm dia Aluminum fancy type powder coated wood finish including, knobs, brackets and end stop etc complete all as specified and directed.

Supply and Fix plate rack made of stainless steel 0.50mm thick,over all size 762mm(H)x787mm(W)x254mm(D) complete all as specified and directed.

S&F PVC Waste pipe 32mm/40mm dia low density polyethylene (LDPE) pipes of pressure rating 6 Kgs/sq.cm complete

M/S LARZAWANGPU AGENCIES

D.P. Traders

M/S SARAI SUPPLY SYNDICATE

M/S Karkies Construction & Co.

M/S MURPHEW ENTERPRISES

MS SANGRILA SYNDICATE