Repair of sewerage treatment plant at 208 CoBRA Bn. CRPF, Badgaon Balaghat (M.P).

Amount

Repair of Sewerage Treatment Plant at 208 CoBRA Bn Badgaon Balaghat (M.P).

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge : With cement mortar 1:4 (1 cement : 4 fine sand).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m²

SEWAGE TRANSFER PUMP - NON CLOG, CENTRIFUGAL PUMP

FLOW CONTROL/SYSTEM

AIR BLOWER WITH MOTOR & ACCESSORIES USHA/BETA

AERATION GRID (DIFFUSER WITH PIPING NETWORK)

TUBE SETTLER MEDIA - PVC

SLUDGE HANDLING PUMP (KIRLOSKAR/EQV)

FILTER FEED PUMP - CI MONO BLOCK KIRLOSKAR

SAND MEDIA FILTER UNIT - FRP

ACTIVATED CARBON UNIT - FRP

ELECTRICAL PANEL/STARTERS INSTRUMENTS

PIPES & FITTINGS (PVC/PPR) STANDARD

CLEANING OF STP TANKS AND DISPOSAL OF SLUDGE OUTSIDE CAMPUS (AS PER DIRECTION OF MUNICIPAL CORPERATION).

M/S ANNA TRADERS

SBM ENTERPRISES

SNEHA BOTHRA

ADHIRA ENTERPRISES