Repair of Govt. Senior Secondary School at Bhalei Tehsil Salooni District Chamba HP

Amount

Excavation in foundation trenches, etcetera in all kinds of classification of soil such as pick work, jumper work, blasting work, jumper blasting work hard blasting or conglomerate strata including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring ,strutting deatering and pumping or bailing out-water (surface and sub soil water) up to any depth and height and any quantum of water including slush which may arise during dewatering , removal of slush and stacking the servicable and unserviceable material clear from the edge of excavation and then returning the stacked soil in 15 cm (Fifteen centimeter) layer when required into plinth sides of foundation etcetera consolidating each deposited layer by ramming and watering then disposing of the surplus unserviceable excavated earth as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals. The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation as per drawing and technical specification nominal mix 1: 5: 10 (one cement: five sand : ten graded crushed/broken stone aggregate 40mm (forty millimeters) nominal size and curing complete including pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work in retaining walls, breast walls etcetera or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Random rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 ( one cement isto five sand) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Brick masonry using second class common burnt clay building bricks in super structure above plinth level in all heights in cement mortar 1:6 ( one cement isto six sand) and curing complete upto all floor level as per specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads, lifts and other incidentals. incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections in , trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in trusses and purlins in building and the like, as per specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm ( Zero point sixty millimeter) thick pre-painted steel sheet of TATA/SHAKTI/DUROSHINE /SAIL in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 ( Twenty ) micron over 5 ( Five ) miocrons primer coating to back coat of polyster of 5 ( Five ) microns over 5 ( Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts , 6mm ( six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials with in all leads ,lifts and other incidentals and as per the direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips having proper Gola shape 90cm. (Ninety centimetres)overall with 0.60mm ( Zero point sixty millimeter) thick prepainted steel sheets of TATA/SHAKTI/ DUROSHINE/Sail in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester (RMP) organic coating of 20( Twenty ) microns over 5 ( Five ) micron primer coating + back coat of polyster of 5 ( Five) microns over 5 micro primer coating including fixing with prepainted iron, J or L hooks bolts and nuts ,6mm(Six milimetre) diametre and prepainted G.I limpet and bitumen washer complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material with in all leads, lifts and other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm ( fifteen millimetre) thick cement plaster in single coat on the fair side of brick /concrete/stone / walls for interior plastering upto floor all level and curing complete including arrises internal rounded angles chamfers or rounded angles not exceeding 80 mm ( eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement isto six sand) upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

15 mm ( fifteen millimetre) thick cement plaster in single coat on the rough side of brick /concrete/stone / walls plastering upto floor all level and curing complete including arrises internal rounded angles chamfers and or rounded angles not exceeding 80 mm ( eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement isto six sand) as per HP.PWD, specifications, approved drawings, design and as per the directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and Laying Duro stone vetrified tiles (300x300x10 mm (three hundred into three hundred into ten millimetre) in grey/ coloured of approved shade in flooring , treads of steps and landing laid on bed of 12 mm (twelve millimetre) thick cement mortar 1:3 ( 1 cement isto 3 sand) laid over and jointed with neat cement slurry finish with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads and lifts and as per the directions of the Engineer-in-Charge and other incidentals.The rate includes GST octroi,royality,Malkana,Tol tax, sale tax or any other taxes imposed by the Government.

Providing and Laying Duro stone vetrified tiles (300x300x10 mm (three hundred into three hundred into ten millimetre) in grey/ coloured of approved shade in skirting, dedo laid on bed of 12 mm (twelve millimetre) thick cement mortar 1:3 ( 1 cement isto 3 sand) laid over and jointed with neat cement slurry finish with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads and lifts and as per the directions of the Engineer-in-Charge and other incidentals.The rate includes GST octroi,royality,Malkana,Tol tax, sale tax or any other taxes imposed by the Government.

Applying two or more coats of Birla white K.J. wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops ,dust,loose materials and other foreign matter sand papering smooth to give final matter finish to the surface complete as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads, lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Providing and Laying polished granite stone flooring in required design and pattern in linear as well as curvilinear portion of the building all complete as per the architectural drawings with 18 mm (Eighteen millimetre) stone slab over 20 mm (twenty millimetre) thick base of cement mortar 1:4 ( 1 cement : 4 course sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by Engineer-in-Charge and other incidentals.The rate includes GST Octroi, royality, Malkana, tol tax, sale tax or any other taxes imposed by the Government.

Providing and Laying heavy duty precast pre-polished cement concrete 40 mm (forty millimetre) thick interlocking paver blocks of approved size, shade and desinn NTC make or equivalent vibro compacted upto including border or kurb block grey or coloured over sub-base of concrete with 25 mm (twenty millimetre) thick average thickness of cement mortar 1:4 ( 1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polished complete (sub-base concrete floor to be measured and paid for separately) complete as per direction of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

G.I. Metal ceiling lay in perfortaed tegular edge global white color tiles of size 595x595 mm and 0.50 mm thick with 8 mm drop made of GI sheet having galvanized of 100 gms/ sqm both sides inclusive and 20% perforation area with 1.8 mm dia holes and having NRC (Noise reduction coefficient ) of 0.50 electro statically polyster powder coated of thickness 60 microns ( minimum) including factory painted after bending and perforation and backed with a black glass fiber acoustical fleece complete as per direction of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Vishal Kumar