PROVN OF CEMENTED HOSE RAMP AT FIRE SECTION, OVERHEAD FILLING POINTS AND DISABLE FRIENDLY RAMP AND DEFICIENT OF CEILING FANS, EXHAUST FAN AT VARIOUS SMQs AT AF STN SALUA UNDER GE AF KALAIKUNDA

Amount

S&F Ceiling fan 230 Volts 50 Hz single phase 1200mm Sweep, including electronic step type fan regulator, of white colour having low power consuption as 50-55 Watt, super high permeability grade electric steel lamination for improved life, glosy powder coated paint for superior finish and longer life, high lift angle of blade for wide air spread and connection up including provision of cable from ceiling rose or connector to fan, complete all as specified and as directed.

S&F Exhaust fan 230 Volts 50 Hz single phase 300mm sweep having speed of 900 rpm, dynamically balanced blade for vibration free rotation, aluminium Die-cast body ensures long life, powerfull fan that provides consistent quality and trouble free operation, anti-corrosive treatment and attractive metallic finish and connection up including provision of cable from ceiling rose or connector to fan, complete all as specified and as directed.

M&L for cutting & making hole of suitable size for exhaust fan 300mm sweep fitment with making good surface with existing surface complete all as specified and as directed.

M&L for concealed point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (HR&FR) upto and incl working voltage 1100volts grade, ISI marked, drawn in to PVC conduit incl all accessories as bend, tee,junction boxes elbows etc incl pressed steel terminal sunken boxes of size 1.2mm covered with 3mm thick plastic laminated sheet ISI marked top cover fixed with Brass screws and unsheathed copper conductor stranded cable (HR&FR) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for one fan point point controlled by one switch 5 Amps, complete all as specified and as directed.

Supply and fixing switch piano flush type, single pole, one way 5 amp complete all as specified and as directed.

S & F ceiling rose, surface bakalite 2 to 3 terminal, single pole 240 V, single pole (65x50mm) surface type, complete all as specified and as directed.

Supply, laying, jointing and testing of 50 mm bore galvanised steel water tubing, medium grade with all fittings and laid in trenches/walls/floors complete all as specified and as directed.

S&F gun metal gate valve with iron wheel head, screwed both ends for iron pipes 50mm bore complete all as specified and as directed.

Supply & fix vertical check valve conforming to IS 4038 suitable for 50 mm dia pipe, complete all as specified and as directed.

Supply , installation , testing and commissioning of monoblock pump set suitable for 415 volt, 3 phase system having capacity 5 HP complete all as specified and as directed.

S&F DOL starter in sheet steel enclosure suitable for 5 to 7.5 HP pump set, 3 Phase, 415 V, 50 HZ, with maximum overload relay range 10-13 Amp, contactor rating 20 Amp having overload, single phasing, phase reversal, Phase imbalance, dry run and short circuit protection , Ammeter meter and volt meter, ON/OFF and trip indication including making all electrical connection to run the pump complete all as specified and directed by Eng in Charge.

Supply & fix PVC insulated 3 core FRLS round sheathed copper conductor 1100 volts of size 6 sqmm, complete all as specified and as directed.

Supply and fixing MCB triple pole of capacity 40 amps, breaking capacity 10 KA 'C' curve, complete all as specified and as directed.

S&F Sheet Steel, Phosphatised, Powder coated double door MCB DBs SPN 8 way single pole and neutral with 200 Amps rated busbar, neutral link, earth bar and DIN rail in accordance with IS 13032, IS 8623, IP 43, fixed flush to wall surface/concealed complete all as specified and as directed.

Excavation in tenches not exceeding 1.5m wide and not exc 1.5m depth for foundation etc or for shafts, wells cesspits, manholes, pier holes etc not exc 10 Sqm on plan and not exceeding 1.5m in depth and getting out loose/soft soil etc complete all as specified and directed

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling mass concrete etc complete all as specified and as directed.

M & L for Damp proof course to horizontal or vertical surfaces including necessary formwork In cement concrete 1:2:4, type B-0, 25 mm thick, complete all as specified and as directed.

M&L for brick work with fly ash brick, straight or curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified and as directed.

Use and waste of timber form work for rough finished surface of concrete as in soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, complete all as specified and as directed

Use and waste of timber form work for rough finished surface of concrete as in sides and soffits of floor or roof beam, beam haunchings, girders, lintels, cantilevers, shelves including supports, overhangs, sides of band etc complete all as specified and directed.

M&L for Mild steel bars TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending, spirally for hoping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia, complete all as specified and directed.

M&L for Mild steel bars TMT bars 6mm to 8mm dia and over cut to length, bent to shape required including cranking bending, spirally for hoping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia, complete all as specified and directed.

M&L for Mild steel bars (TMT bars) 6 mm dia and over upto and including 10mm dia as in stirrups, spacers and binder confirming to TMT bars complete all as specified and as directed.

M&L for RCC nominal mix 1:2:4 type B1(using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed. Note: Reinforcement and formwork will be measured and paid separately.

M&L RCC nominal mix 1:2:4 tye B1(using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span etc. complete all as specified and as directed. Note: Reinforcement and formwork will be measured and paid separately.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 ,finished fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 ,finished fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on ceiling and like in cement mortar 1:3 on brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coat of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plastered ceiling surfaces and applying two coat of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.

Surface excavation n. exc. 45 cm deep and averaging 30 cm deep and getting out in soft/loose soil, complete all as specified and as directed.

M&L for hard core of broken stone or boulders gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and ammed to a true surface, complete all as specified and as directed.

M&L 100 mm thick cement concrete type B-2 1:2:4 (using 40mm graded stone aggregates as in floor finished even and smooth with using extra cement complete all as specified and as directed

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed

M&L Chequered cement concrete tiles 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors complete all as specified and as directed

M&L 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finish etc complete all as specified and as directed.

Supply and fixing Hospital curtain track complete set as per the details enclosed, all as specified and directed.

Supply and fixing patient friendly Polo Stainless Steel Grab Bar (while sitting over WCs) for hospital toilets complete set as per the details enclosed, all as specified and directed.

Supply and fixing Health Faucet with flexiable pipe (Wall mounted Type) for hospital toilets complete set as per the details enclosed, complete all as specified and as directed. Make : Jaquar

Supply and fixing Grab Bar Stainless Steel (For support on walls) for hospital toilet/bathroom complete set as per the details enclosed, complete all as specified and as directed. Make : Jaquar

SG ENTERPRISE

NATIONAL CONSTRUCTION CO