Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹21.2 L+₹3.0 L (16.5%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder |
Tender Value
₹23 L
EMD Value
₹46,000
Closing Date
6 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh. Rahul Meena, IDSE, EE, Garrison Engineer, CEA
MES OFFICE GE KASAULI PIN-173204
REPAIR OF SEWAGE LINE, SEPTIC TANK, SOAKAGE WELL, SEWAGE SYSTYEM AND OTHER MISC WORKS AT APS DAGSHAI UNDER GE KASAULI
2024_MES_664843_1
GEK-57/2024-25
Open Tender
Civil Works
Item Rate
330 days
DAGSHAI UNDER GE KASAULI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE KASAULI
₹46,000
Yes
25 Oct 2024
9 Jul 2024
13 Sept 2024
9 Jul 2024
6 Sept 2024
2 Aug 2024
15 Jul 2024 - 21 Jul 2024
Amount
Schedule 'A' Section - I
M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (squre/rectangular) area of each tile exc0.11sqm but not exc 0.18 sqm in floors , set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 , including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
M&L for Glazed ceramic coloured tiles in vertical surfaces exc 0.08sqm and n exc 0.16sqm, 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
M&L for 20 mm thick granite stone machine cut (table rubbed & polished) in one piece as in steps, jambs,pillars, windows cills, cooking platform and similar work bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigments to match the shade of granite stone including grinding and polishing including making hole in platform and screed bed for bedding 20 mm thick in cement mortar 1:4 , including dismantling old unsv granite stone.complete all as specified.
M&L for brick work with sub class `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed including demolition of old brick masonary built in cement mortar including all quoins arches pillars complete all as specified and directed
M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in retaining wall ,parapet wall, drain etc including demolition of stone masonary built in cement mortar including all quoins arches pillars complete all as specified and directedcomplete all as specified and directed
All as per item No -9 but except stone complete all as specified and directed
M/L for PCC 1:2:4 type B-1 using 20 mm graded stone agg as in coping to retaining walls/steps/parapet /base of railing etc including necessary formwork including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials )
M/L for Precast cement cocrete in quion blocks / bond stone and setting in CM 1:4 including necessary formwork including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials )
M&L for Boulder filling, laid dry, hand packed tightly as in back filling of retaining wall complete all as specified.
M & L Rendering 20 mm thick on fair faces of stone masonery surfaces in CM 1:4 finished even and smooth without using extra cement complete
M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified and directed
M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement including taking down cement plaster on brick or stone wall, Ceilling etc and racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. all as specified and directed
M & L Rendering 20 mm thick on fair faces of stone masonery surfaces in CM 1:4 finished even and smooth without using extra cement complete including taking down cement plaster on brick or stone wall, Ceilling etc and racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. all as specified and directed
M&L preparation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer on walls complete all as specified and directed
M&L for precast RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in landing cover slab for kittchen platform manholes , septic tank set in cement mortor ( 1:6) including necessary form work complete (Reinforcement shall be measured separately) including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in position not otherwise specifically provided for complete all as specified and directed.
S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including crancking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.5mm dia or securing with clips quality confirming to deformed or twisted bars complete all as specified and as directed.
S&F in repair for 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified. Including taking up or down steel tubing and connections upto 15mm bore complete all as specified and directed.
Ditto as per item 21 abive but 20 mm dia
S&F in repairs Vitreous China wash hand basin white with pedastal flat back size 550x400 mm including brackets and waste coupling and waste pipe complete all as specified
S&Fin repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 Ltrs capacity complete all as specified complete all as specified and directed by Engr-in-Charge
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts,) complete incl PVC P or S trap 110 mm dia and making good to floor to match with adjoining surfaces including plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated of aluminium hinging device etc complete all as directed by Engr-in-Charge
S&F in repair fixing WC Orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) includung provision of lime concrete bedding and PVC S trap of 110 mm dia etc complete all as specified and directed by Engr-in-Charge
S&F in repair for CP grating of 100 mm dia including jointing with solvent cement all as specified and as directed
S&F in repair 15 mm bore brass Chromium plated wall/basin/sink mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified.
S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with plugs, washers and wastes; including waste coupling and waste pipe bedding in cement mortar to dwarf wall or fixing cantilever brackets and connecting union to pipe etc complete all as specified.and directed
S&F in repair stainless steel soap dish of approved pattern all as specified and as directed Make Hindware or equivalent
S & F in repair 20mm dia,D type, 60cm long aluminum anodised towel rail, complete.
S&F in repair 15mm bore angle cock, chromium plated, brass, fancy type, screwed both ends for iron pipe or for union etc complete all as specified and directed.
S&F in repair 15mm bore PVC connection with brass nut of length 450mm etc complete all as specified and as directed.
S&F in repair CP toilet paper holder all as specified and as directed
S&F in repair 15mm bore Bib taps, chromium plated cast copper alloy, fency type with crutch or butter fly handle, screwed down for iron pipe or for brass ferrule etc complete all as specified and directed.
S & F in repair for 15mm bore pillar tap fancy type, cast copper alloy chromium plated screwed down, high pressure with crutch or butter fly handle etc complete all as specified and directed.
S&F in repair stop valve 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union etc complete all as specified.
ditto as per item 40 above but 20 mm dia
M&L for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including PTMT float valve of 15 mm dia and taking down old unserviceble PVC water tank all as specified in SSR Part-I completed and as directed by the Engr-in-Charge
ditto as per item 42 above but 500 ltr capacity
S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / wall complete all as specified and as directed including taking up or down waste and vent pipes of any type complete.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall, weep holes etc ..complete including taking up or down waste and vent pipes of any type complete. all as specified and as directed by the Engineer-in-Charge
S&F in repair PVC(SWR) bend 110mm dia bore complete all as specified and directed by Engr-in-Charge
S&F in repair PVC(SWR) bend 75mm dia bore complete all as specified and directed by Engr-in-Charge
M&L for cement concrete 1:4:8 type D-2 ( using 40mm graded stone aggregate) as in sub base floor and in foundation including necessary form work complete all as specified and directed.including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials )
M&L Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade and incl laid over 50 mm thick sand cushioning complete all as specified and as directed
Ditto as per item 49 above but interlocking pavour block with pigment .
M&L for Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, with grey cement and pigment set jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM 1:6 in floors with grey cement and pigments complete including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
Excavation in trenches in hard/dense soil n. exc 1.5m wide and n. exc 1.50m deep and getting out complete all as specified and directed.
Returning filling in and including spreading, leveling and well ramming n.exc 25 cm thick in hard and dense soil complete all as specified.
Removing excavated materials n.exc 50 m and depositing where diretected at a level n.exc 1.5 m above the starting point in soil complete all as specified.
M&L for salt glazed stone ware drain pipe laid in trenches and jointed all as specified (internal dia of pipe 150 mm bore pipe) complete including demolition and breaking up 150mm dia salt glazed stone ware/AC/RCC drain pipes jointed in cement mortar and taking out of trenches removing the debries from site complete all as specified and as directed.
M&L for cement concrete in surface channel and drain type C1 1:3:6 (20 mm graded agg) and finishing surface even without using extra cement all as aspecified and as directed
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms moulds, mitred/stopped ends etc complete all as specified and directed.
M&Lfor PCC (1:4:8) type D2 ( using 40mm graded stone aggregate ) as in the drain pipe incl packing under & haunching against the side of pipe after they are laid and tested for 150mm dia compelete all as specified.
Material and Labour Framed work such as grills, gratings,railing etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.
Material and Labour for Welded steel wire fabric n.exc 4 Kg/Sqm supplied and fixed complete to wood or steel members complete all as specified.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified & directed complete all as specified and directed by Engr-in-Charge
Cutting in to existing manholes for connecting drain pipes making good to pipe and rendering cutting out existing benches for and forming branch channel (1/2 round or 3/4 section)in cement concrete (1:2:4) type B1 smooth finished and reforming benching as required for 150 mm internal bore pipe complete all as specified.
Cleaning of septic tank incl sludge chambers by removing sludge and sludge water by pumping or manually or other means and the sludge /sludge waste night soil and solid soil waste night soil including slugde water from the septic tank of any capacity and disposed off to distance n. exc to 100 mtrs and depositing the same in ditch(including excavation of ditches and making good the surface and as required)including taking off and refixing manholes covers complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description any position not otherwise provided complete all as specified
S&F Mild steel section for fencing post including embeding in concrete and screwing etc. including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
M& L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) as in foundations,filling and mass concerete etc complete all as specified.including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials )
Supply only Mild steel round bars 10mm dia and over, fixed in chainlinkfencing including necessary welding work all as specified and as directed
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed screwed bothe ends, each screwed end to be fitted with washers and one hexagonal or square nut diameter of neck 5 to 10 mm exc 5 cm and n exc 10 cm long complete all as specified and directed
S&F in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed each line wire to measured) complete all as specified and directed
Dismantling fencing wire mesh, any type complete all as specified and directed
Supply only chain link fencing mild steel galvanised fencing any size or type complete all as specified and directed
Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc including provn of binidng wire complete all as specified and directed
M&L for 75 mm PVC (SWR) floor trap fixed with PCC 1:2:4 type B-1(1:2:4) and solvent cement complete including jointing to waste pipe and taking out old unserviceable floor trap all as specified and directed .
Comprehenshive maintenance and cleaning of sewage system including sewage lines, manholes, soakage wells/soak-pits, gully traps, septic tanks attending bloakages in WCs/ WHBs/Drains etc by employing necessary resources including T&P at APS Dagshai all as directed by Engineer-in-charge. The location/ building/complex where work is to be carried out consist of the following:- (a) All Academic Blocks. (b) All Staff Quarters. (c) All Hostels. (d) Office Accns. (e) Mess bldg NOTES: (i) The Contractor will employe a Supervisor. The Supervisor so employed shall report to the concerned JE daily to give feed back and also to receive day to day sewage Complaints and necessary instructions for smooth running of the contract. (ii) He will carry out normal maintenance to sewage sytem as required at site. (iii) For any default/delay in attending the complaints recovery shall be effected as per contract conditions provided here-in-after. (iv) T & P as requiered for the work shall be arranged by the contractor without any extra cost to the deptt. (v) Supervisor engaged by the contractor shall take all necessary preventative safety measures and adequate precautions to avoid any health hazard and department shall not be held responsible for any unwanted incidence.
Amount of credit of Rs. 21341.60 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
RR Builders (BID ID -3075742)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .