Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹34.7 L+₹21,113.75 (0.61%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹34.8 L+₹31,062.50 (0.90%)Rejected-Finance | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹35.9 L+₹1.5 L (4.31%)Rejected-Finance | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹36.9 L+₹2.5 L (7.12%)Rejected-Finance FLAT NO 02 RUTUPARNA APARTMENT PLOT NO 36 S NO 324 2A NEAR G D SAWANT COLLEGE PATHARDI NASIK 422 010 | NASHIK | MAHARASHTRA | 422010 | L5 | Rejected-Finance Not lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
28 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Nasik Road
Garrison Engineer Nasik Road AOP Complex Near AOP Gate PO Gandhinagar Nasik 422006
As per Tender documents
2024_MES_644656_1
GE/NRC/8637/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer Nasik Road
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Nasik Road
₹98,000
24 Jun 2024
29 Feb 2024
30 Mar 2024
29 Feb 2024
28 Mar 2024
14 Mar 2024
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed
M&L for coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm thick set and jointed in neat cement slurry and pointed in coloured cement to match in floor etc complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately
M&L for coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.11 sqm but not exceeding 0.18 sqm thick set and jointed in neat cement slurry nd pointed in coloured cement to match in floor etc complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately
M&L for DOUBLE CHARGED vitrified ceramic tiles any light shade 8 to 9mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set & jointed in neat cement slurry and painted in white or coloured cement to match. (shade will be approved by EIC/GE)
M&L for glazed ceramic tiles coloured size (450 x 300 x 7) mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed
M&L for rendering 10mm thick in CM 1:4 as in backing coat plaster on surfaces of brick masonary or stone masonary surfaces complete all as specifed and directed
Dismantling of stone slabs of any descripation or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed
S&F Machine cut kota stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specifed and directed
S&F Machine cut kota stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing as in skirting complete all as specifed and directed
M&L for granite (of any type)work (table rubbed and polished)20 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite
M&L for hand cut cudappa stone slab 16 -18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete Note: screed bed layer measured seperately complete all as specifed and directed
Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work
Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.
M&L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed
M&L for Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed
M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate as in sub base / foundation filling mass concrete complete all as specifed and directed
Taking down and Re-fixing only 20 mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed complete all as specified and directed
All as per Item No. 17.00 above but 15 mm dia
S&F in repairs 20 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor complete all as specified and directed.
All as per Item No. 19.00 above but 15 mm dia
S&F in repairs PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) B-1 dia of outlet 75mm complete all as specifed and directed
S&F repairs bib taps standared of PTMT 15mm bore dia any colour high presure screwed for iron pipe fixed and repairs (minimum weight 90 gms) complete all as specified and directed
S&F in repairs 15 mm size chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specifed and directed
S&F in repairs 125 mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed
S&F in repairs 15 mm size chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specifed and directed
Demolition of brick work/stone work built in cement mortar. including coping but except ashlar facing dressed stone work to precast concrete article complete all as specified and directed
M&L for Brick works with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specifed and directed
M&L for walling of random rubble uncoursed, well bonded, bedded to solidly hearted built in cm (1:6) complete all as specified and directed
M&L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specifed and directed
S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 ltr.
S&F in repairs Ball brass valves, high pressure, with polythene float and flynut for 20mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed
S&F in repairs 20 mm Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed
S&F in repairs 110mm PVC (SWR) pipe single socketed any length with rubber ring joints fixed to wall complete all as specified & directed bore of pipe in mm complete all as specifed and directed
All as per Item No. 33.00 above but 75mm
S&F of 75 mm dia PVC(SWR) bends.
All as per Item No. 35.00 above but 110 mm dia
S&F of PVC(SWR) branch piece,single(single Y) 110/75 mm dia equal or unequal
S&F PVC(SWR) vent cowl of 75/ 110mm bore
S&F 110/75 mm bore PVC (SWR) junction single-Tee (equal or unequal) with access door complete all as specified and as directed.
S&F in repairs grating doom PTMT of 100mm dia complete all as specifed and directed
S&F in repairs Vitreous china squatting pan with PVC(SWR) 'P' trap of 125/110 mm bore,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)
S&F in repairs Vitreous china wash down water closet (pedestal pattern), white including plastic water closetseat, closed pattern with flat bottom , and cover and mild steel choromium plated or aluminium hinging device complete fixed.
S&F in repairs CP health faucet suitable for 15mm bore with 1.20M flexible pipe and wall hook complete all as specified and as directed.
S&F in repairs PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs with 32mm dia flush pipe complete all as specified and directed.
S&F in repairs vitreous china wash basin, flat black white, size 550 X 400mm including cutting for and pinning in for bracket and 32mm dia CP waste coupling, 32mm dia PVC waste pipe and connection to drain pipe complete all as specified and as directed.
S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm
S&F in repairs Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors
S&F in repairs vitreous china urinal half stall type white including flushing cistern, flush pipe, waste pipe complete all as specifed and directed
S&F in repairs PVC connections 15mm size with PTMT nuts of length 300mm.
S&F in repairs stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed
S&F in repairs Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and directed
S&F in repairs Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms complete all as specified and directed.
M&L for special treatment to sunken portion with 10 mm thick plaster in CM 1:4 with WPC liquid conplast 421 and applying one coat each of Nitoproof 100 & Nitopro 120 on plastered surface . Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC & CI/PVC pipes joint shall be filled/jointed with mixture of cement fine sand and nitoproof 130 and provided hole in the wall & fixed 600 mm long 20 mm dia spout light grade & 1:3:6 C2 filling , floor area of wc upto 1.5 Sqm etc complete all as specified and directed.
Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each &removing from site
Taking down chowkat or frames with shutters (without taking off shutters from the frame exc. 1.5 but n exc 4.00 Sqm each &removing from site
S&F in repairs aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges
Taking down shutters exc 1.00 Sqm but n exc 2.00 Sqm
Taking down shutters but n exc 1.00 Sqm
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing.
S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.
S&F MS butt hinges 100mm size medium weight complete all as specified and directed
S&F aluminium alloy barrel tower bolt 150 mm long complete all as specified and directed
S&F 150 mm extruded aluminium alloy handels complete all as specified and directed
S&F in repair aluminium alloy anodised sliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete all as specified and directed
S&F aluminium anodised powder coated (min thickness 50 microns) frame for doors, windows, ventilators, complete all as specifed and directed
S & F Aluminium anodised powder coated window and ventilator shutter, sliding type without sash bar, alumn section section weighing not less than 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed
S & F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.including suitable 2mm thick aluminium composite panel sheet half section (wherever required) complete all as specified complete all as specifed and directed
S&F Sheet glass ordinary quality 4.00 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of apreature 1.40mm and fixed in aluminium windows, wooden doors etc complete all as specified.
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate), 75mm thick as in sub base all as specified and directed.
M&L for Machine pressed precast conctete interlocking paver block with grey cement and pigment with rubber moulded glossy finished surface, any shape and size confirming to IS 15658-2006 of 55 to 60 mm thickness M-30 grade laid over and including 30 mm thick stone dust cushion with remove old unserviceable concrete blocks complete all as specified & directed.
M&L for PCC 1:3:6 type C1 (20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
Dismantling wall and ceiling boards( Fibre, pulp, insulation etc) or insulation boards any thickness including cover fillets and framework complete all as specified & directed.
S&F interlocking aluminium powder coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and S&F non asbestos cement pre-painted building board 4mm thick “in ceiling fixed with screw as per manufacturer instruction” (Note: Ceiling board texture will be diamond shape or directed by Engineer-in- Charge)
Dismantling asbestos cement (corrugated,semi corrugated)sheets in roof covering all as directed by Engr-in-charge
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and making good to wall and roof joint.
S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.
Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.
S&F rolled mild steel Joist, channel, angle, flat sections, fixed independently, without connecting plates, or M S tubular sections etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe 290( E-165) all as directed by Engr-in-charge
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 with tubular pipes complete all as specified and directed by Engr-in-charge
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed by Engr-in-charge
M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width n exc 10cm
M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm
M&L for filling of gap portion of gable wall with PCC (1:3:6) or brick in cement mortar of any height with suitable arragement of shuttering & formwork all as specified and directed by EIC.(Note: Measurement shall be measured/paid in Running metre)
Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. all as specified and directed
M&L for rendering 15mm thick in cement mortar(1:6) on Stone masonry surfaces, concrete surfaces or fair faces of brick work and finishing even and smooth including taking down old cement plaster complete all as specifed and directed
M&L for preparation of plastered surfaces of walls by washing, rubbing down,stopping and applying two coat of oil bound distemper over a coat chalk whitening primer with thin layer of wall care putty prepatory to distemper on walls.
M&L for rendering 15 mm thick cement mortar on stone surfaces, concrete surfaces or other than fair faces of brick work in cm 1:4 finished even and fair with out using extra cement including taking down old cement plaster complete all as specifed and directed
M&L for preparating newly plastered surfaces of walls and applying two coats of Acrylic weather proof exterior paint over water based primer including prepare of surface complete all as specified and directed
Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting, regulator, sockets, main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc as specified & directed.
M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point/ fan point controlled by one, one way switch. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.
All as per ser item No. 91.00 herein before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.
All as per ser item No. 91.00 herein before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.
All as per ser item No. 91.00 herein before but on independent board.
All as per ser item No. 91.00 herein before but one light point controlled by 2 way switches.
All as per ser item No. 91.00 herein before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.
M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casin and caping (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point and one fan point controlled by one, one way swtich. Note:- Unit rate include for cutting chases for sinking for boxes and making good to wall ,floors etc.
All as per ser item No. 97.00 herein before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.
All as per ser item No. 97.00 herein before buton independent board.
All as per ser item No. 97.00 herein before but one light point controlled by 2 way switches.
All as per ser item No. 97.00 herein before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.
All as per ser item No. 97.00 herein before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including Fibre insulation boards, treated on one face only of adequate size for mounting purposes.
Supply and fixing in replacement of switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.
Supply and fixing in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.
Supply and fixing in replacement of switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.
Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 3 pin) 5/15 Amps, 230V, AC.
Supply and fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with invertor LED bulb 9 watt complete all as specified and directed
Supply and fix in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.
Supply and fixing in replacement of bell push, flush type, 5 Amp single pole, 230 volts white finish all as specified & directed.
Supply and fixing in replacement of switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed.
M&L for replacement and connecting up fan regulator electronic on existing phenolic laminated sheet dimmer type 230 volts, 450 watts suitable for ceiling fan 1200/1400mm sweep.
Supply and fixing in replacement of switch modular type 6 Amps one way AC 230 Volts.
Supply and fixing in replacement of switch modular type 16 Amps one way AC 230 Volts.
Supply and fixing in replacement of modular type bell push 6 Amps, AC 230 Volts.
Supply and fixing in replacement of modular type socket 6 Amps 2/3 pin combined, AC 230 Volts.
Supply and fixing in replacement of modular type socket 6/16 Amps 2/3 pin combined, AC 230 Volts.
Supply and fixing in replacement of modular type fan regulator, AC 230 Volts.
Supply and fixing in replacement of modular white cover plate with frame, 2 module.
Supply and fixing in replacement of modular white cover plate with frame, 4 module.
Supply and fixing in replacement of modular white cover plate with frame, 8 module.
Supply and fixing in replacement of 30 Watt LED street light fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08, including connecting up with 2/3 core flexible coppper conductor cable, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of invertor LED bulkhead 10 watt 220 volts AC with IP 65 protection with inbuilt battery back-up complete with drivers, clamps and accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.
Supply and fixing in replacement of LED 20 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.
Supply and fixing in replacement of invertor LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, IP 20 with battery backup, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.
Supply and fixing in replacement of LED 10 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.
Supply and fixing in replacement of invertor LED round shape 15 watt 220 volts AC recessed/ surface mounted type with high efficacy PMMA diffuser soft glare free light complete with drivers, battery backup, clamps and suitable size as per ground requirement complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.
Supply and fixing in replacement of buzzer, AC, 230 volts, single phase complete all as specified and directed.
Supply and fixing in replacement of bell, AC, 230 volts, single phase complete all as specified and directed.
Supply and fixing in replacement of bell multi music type AC, 230 volts, single phase complete all as specified and directed.
Supply and fixing in replacement of sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified.
Supply and fixing in replacement of sheet metal enclosures with plug socket triple pole and earth enclosure with three pin and earth plug with socket, 415 volts complete with one MCB of 63 Amps (TP) complete all as specified.
M&L for preparation of surface of MS/Meter box all including inside and outside surface by scrapping applying two coats of Gray paint by Spray painting complete all as specified and directed by Engr in Charge.
Supply and fixing in replacement of submain wiring with three single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.
Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including PVC heavy duty surface casing caping including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.
Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.
Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.
Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including PVC heavy duty surface casing caping including 2.5 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for Srl item No.134.00 to 137.00 herein before :- (i) Two runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.
Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 4 way with 200 Amps rated busbar all as specified and directed.
Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 8 way with 200 Amps rated busbar all as specified and directed.
Supply and fix in replacement distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed.
Supply and fix in replacement distribution board sheet metal enclosure factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 2 ways all as specified & directed.
Supply and fix in replacement distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed.
Supply and fix in replacement distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.
Supply and fix in replacement distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 12 ways all as specified & directed.
Supply and fixing in replacement 4 Pole MCCB 125 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 25 KA.
Supply and fix in replacement MCCB 63 Amp TP, 415 volts 16KA.
Supply and fix in replacement MCB FP 63 Amp, 415 Volts, 50 Hz with 10 KA.
Supply and fix in replacement MCB TP 40 Amp, 415 Volts, 50 Hz with 10 KA.
Supply and Fixing in replacement of MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA.
Supply and Fixing in replacement of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA.
M&L for replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.
NOTE: - AMOUNT OF SCHEDULE OF CREDIT RS. 74,790.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.
M/S K. K. Construction
VISHAL CONSTRUCTIONS
Srujan Associates
Abhiraj Enterprises
M/S R.K.S. CONSTRUCTION
Bidder Name
M/S K. K. Construction
Vinod Enterprises
Srujan Associates
M/S R.K.S. CONSTRUCTION
Abhiraj Enterprises
VISHAL CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .