75 H(F)(W)/2025-26

Amount

Part - A ( Material) Following Material Supplied by the Contractor:-

Supply of 11 KV RMU with all accessories

Supply of Gland 63, 50, 28, 25 mm as Per Cable Size

Supply of Pre Cost of Pannel B Type Pannel

Supply of Pre Cost of Pannel C Type Base

G.I. Pipe 6'' dia

Copper L Piece for 250 KVA T/F

Stay clamp with nut & bolt

G.I. Pipe with Clamp

Stone Pad

Aluminum Lug for 250 KVA Transformer

Holding Clamp for TOP Channel, TPMO Set & Fuse wire Set with Nut & Bolt

Danger Board with Clamp

Carriage including loading,unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 30 Kms. (distance approx)

S.T. Pole 11 Mtr. long

Transformer 250 KVA

11 KV XLPE Cable 3x185 sqmm

11 KV Out door Cable Jointing kit 3x185

11 KV Staight Through Cable Jointing Kit 3x185 sqmm

L.T. XLPE Cable Al 1x400 sqmm

L.T. XLPE Cable Al 3.5x240 sqmm

L.T. XLPE Cable Al 3.5x150 sqmm

Other matching Materials

Dragging of ST/PCC Pole from dump site to pit site

Fabrication and Errection of Double Pole Support on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Grouting and Binding of 11 KV Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Mounting of 250 KVA Transformer as per RESSPO Norms.

Laying of 11 KV XLPE Cable 3x185 sqmm underground by HDD (HORIZONTAL DRILL DIRECTION) Method by HDD Machine Complete in all Respect as per norms. (All the material will be supplied by the contractor .

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x185 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x185mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x185mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Construction of RMU Plinth (All Material is Provided by Contractor) As Per RESSPO Norms.

Fencing of RMU Plinth (All Material is Provided by Contractor) As Per RESSPO Norms.

Installation, Erection and commissioning of 11 K.V. RMU on constructed plinth and connecting with system including completion of termination/Jointing kits testing of its and etc complete in all respect.

Construction of Plinth of Transformer Size 2x2x1.5 Mtr including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Distributon feeder pillar type-B TP& N, 3 Phase 415 V, 250 Amps incoming rating type suitable for outdoor installation, in acoordance with technical specification incomer-1 set of 250A TP MCCB with spreader & Extended handle outgoing-6 Set of 125 Amp. TP MCCB. The Cubical should be weather proof, duct proof, Vermin proof and enclouser protection shall be IP-55 as per IS 2147-1962 and IS:8623. The Panels/switches boards shall be fabricated qut of 14 swg CRCA sheet steel and provided with 16 swg hinged doors including suitable foundation.

Laying of L.T. Cable Size (1x400, 3.5x240, 3.5x150) sqmm

Contreting of Pole with Muffing

Chemical Pipe for Earthing (A&B) Pannel (all the material will be supplied by the contractor.)

Installation & Cable termination of B type Pannel

M/s Shukla Enterprises (BID ID -5527935)