CONTRACTS IN CIVIL WORKS OF WAREHOUSE 2000 MT MACHINERY SHED 190.04 Sq.M.

Amount

CONTRACTS IN CIVIL WORKS OF WAREHOUSE (2000 MT)

EXCdVdtiOh for föünddtion in earth, SÖii Of Oil 'types, sand, grovei and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, wdtering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metros beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling ramming, watering including shoring and strutting etc. complete. (Lift upto I .50 m) By Mechanical Means

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natura! Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast In situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven dhd honeycombed surface and curing etc. complete. The Cement Mortar I plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering wili not be Ollowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ anno,rete Ratch mix plant (Pan mixer) etc.. r.nmplete. With fine aggregate (Crushed sand VSI Grade)

Providing uncoursed rubble masonry of trap/granite/quartzite/gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls/in plinth of extemal walls including bailing out water manually , striking joints on un exposed faces and waterinq etc-complete.

Providing and laying damp proof course 50mm thick in M20 cement concrete layer and bitumen/using cement with waterproofing compound curing, formwork etc. complete.

Providing in Situ Mix M—20 of trap / granite [quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out wdter, Steei centering formwork, Vtéflthé/pum>ing cover blödks, cornpaclion and curing roughening the surface if special finish is tn he provided (Fxaluding reinforcement and structural steel) etc, complete, with fully automatic micro processor based PLC Wilh SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement Ond SifUCturai steel) .with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VS! Grade finely washed etc)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fihS, drehes etc. dS per détdiied designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing second class Bumt Brick masonry with conventional/ I.S. type bricks in cement mortar in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete

Providing and laying Cast in situ/Ready Mix cement concrete M15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar I :3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed,) With fine aggregate (Natural Sand / Clushecl suncl VS! Gmcle finely washed etc)

Providing and laying Cast in situ/Ready Mixcement concrete M- Of granite/ as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VS! Grade finely washed etc)

Providing and laying Cast in situ / Ready Mix cement concrete M20 of trap/granite/quartzite/gneiss metal for R.C.C.slabs and landings as per detailed designs and drawings including steel centering,formwork,cover blocks,laying/pumping,compaction finishing the formed surfaces with cement mortar of sufficient minimum thickness to give d smooth end even surface or roughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement and structural steel) .with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade

Providing second class Bumt Brick masonry with conventional/ I.S. type bricks in cement mortar in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing sand faced plaster extemally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1 :4 using waterproofing compound at I kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing neeru finish to plastered surfaces in all positions including scaffolding and curingetc. complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete

Providing intemal cement plaster 20mm thick in Single coats in cement mortarl :4 without neeru finish,to concrete, brick surface, in all positions including scaffolding and curing etc.complete.

Providing and applying white-wash in two coats on o!d/new plastered or masonry surfaces and as bestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.

Providing and applying three coats of waterproof cement paint nt approved manufacture cand of approved to new plastered surfaces including scaffolding if necessary,cleaning and preparing the surface,watering for two days etc. complete

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced With 35 x 35 5 •mm angle section fitted With Sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement eonsisting of worm gear •wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)

Providing and fixing steel ventilator fully glazed partiy fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain /obscured glass panes 5mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete.

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. iayersinciuding watering and compacting etc. complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete

Providing stone/ rubble filling of trap/granite/quartzite gneiss stones for foundations including filling voids with sand/grit and compaction etc complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessaryrefilling with bitumen etc. complete.

Providing and fixing M.S.angle sill of 50 x 50 x 6mm as per details and drawing supported on necessary including fixing and fastening with ,painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete.

AS Directed by Engineer Incharge Providing and fixing M.S.Ladder as per details drawing supported on necessary including fixing and fastening with *painting M.S. ladder with one coat of red lead primer and two coat of oil paint etc. complete

AS Directed by Engineer Incharge Providing and fixing copper strip 25 mm wide and 3mm thick for lightening conductor including fixing with screws required scaffolding etc.complete Note-Lightening conductor and earthing pits is not considered in this item

Providing and fixing 90cmx60 cm Marble plate engraving I Ocm.height letter,figures including painting the lefters/figures with approved colour and shade complete

Conveying materials obtained from road cutting including all lifts,layingin layers of 20cm to 30cm. breaking clods,dressing to the required lines, curves,grades and section,watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m.t0300m.inclusive from the site of excavation to the site of deposition as directed

Providing expansion joints in RICCframed structure (exterior Columns) with plain premoulded filler 25 mm thick and 3mm thick alluminium plate,hold fast,fixing T.W.battens on intemal face,finishing etc. complete as directed.

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc

Providing soling ( below footing) using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing preconstructional antitermite treatment as perl.S.6313 (Part-Il) by treating the top surface of plinth filling at the rate of 51itres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

Providing and fixing plain zinc sheeting of 0.80mm thick (22B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts,lead and bitumen washers etc. complete. (Weight of 6.8 Kilogram/sq.m.)

Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Sociai,Heaith and Safety (ESHS) risks and ESHS Code of Conduct AS Directed by Engineer Incharge

41 A BC Types Fires are effective for types of fire class A,B,& C types of fires as will as electrical fires and also ABC Powder Types (Stored Pressure Fire Exitinguisher ,multipurpose uses & ISI ,ISO and CE Certified Product and Multipurpose Uses ABC Type Fire extinguisher 6 kg with 5 years warranty AS Directed by Engineer Incharge

S.W.-II PEB WORK (Above Plinth)

A Structural Steel E-350- Supplying, fdbricating, erecting and fixing in position Of Steel structures at all elevations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062 - 2006. Rate shall include cost of cutting, welding, splic plates and packing plates, transporfing,sttdightening, Cleaning, fob(lCöting and erecting in position welded/bolted Structuralsteelwork in columns, beams, trusses, purlins, platforms, ladders, monorails,staircases ,supports, strengthening of steel members etc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings including painting as per G4/G5/G6 before erection and all materials and labour charges etc., complete and including Sand blasting & painted with I coats of enamel paint (Berger EPILUX SG — HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc., complete as shown in drawings, as per specifications AS Directed by Engineer Incharge

B) Structural Steel Cold Formed Light gauged- Cold Formed Light gauged-Supplying, fabricating and erecting of Cold Formed Light Gauge structural steel members conforming to IS:801/ IS:81 1 hot-dip galvanised to IS:4759 - 96 including cutting,welding or bolting, splice plates and packing plates, transporting, straightening, AS Directed by Engineer Incharge

C) Sheeting PPGL 0.5 mm thk - Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer incharge with all necessary accessories.AS Directed by Engineer Incharge

D)Roof Assesories- Supply & Fixing of 0.5 mm thk PPGL roof accessories as per CORNER FLASHING Center Ridge Gable flashing, Center Ridge, er Ridge

E) Roof Gutter (Assumed Girth- 600 mm) PPG 0.5 mm Thk. Supplying, fabticatifig and erectihg in position PPG Eaves Gutter Of required size with stop ends,all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing and fixing bolts,nuts, washers etc., conforming to latest specifiCdflöh ihCiudihg straightening, Cutting,weiding, bending to shape, bolting etc.,complete and as directed as per engineer incharge / Construction Manager

F) Downtäke Pipe- Providing and fixing of the rain water down take pipes of PPGI, the sectional area of rain water down take pipes provided shall be generally at the rate of I square cm per 70 to 80 sq uare F) Downtäke Pipe- decimetre of roof area drained. No spout shall be less than 80 mm in diameter.The spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and As Directed by Engineer Incharge

G) Polycarbonate Sheet - Supply & Fixing of 2mm thk polycarbonate sheets as per drawing & as directed by engineer in-charge AS Directed by Engineer incharge

Providing and fixing wind operated Turbo Ventilator system (24 inch dia.)över existing roof incluing cutting of sheet ,proper fixing in position to true line and level with all fixters & fastening ,providing 0.8 mm thick FRP Sheet for covering area between roof and fan so as to provide waterproof joint with approved water proofing compound making good the roof surface including cleaning etc.complete.(General application for all types of roofs for ventilation and day light parpose at terrace (As directed by Engineer incharge)

S. W *Ill ELECTRIFICATION

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of l . IkV complete As per specification No. CW-EXN-CTR

Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1 Kv cable complete as per specification No. CWEXN-CTR

Supplying & erecting mains PVC unarmoured cable 1100Volt grade ISI mark 3 core / 2.5 sqmm stranded / solid copper complete erected on wall with duly painted G. l. Saddle @ 0.25 m C/C & rigidity grouted in the wall with the help of plated screw.As Directed by Engineer Incharge

Supplying & erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrial two pin plug socket 10 A and 3 pin plug top 10 A with top cover necessary connection etc complete with approved make

Providing point wiring for street light with PVC unarmoured cable 1 100Volt grade ISI mark 3 core I .5 sqmm stranded / solid copper erected on wall with G. l. Saddle duly painted @ 0,25 m C/C rigidly grouted in the wall with the help of plated screw including

Supplying & erecting 230V integral type LED Lamp suitable for B-22/E-27 base

Supplying and erecting integrated LED street light fitting 23 to 25W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 2300

Supplying and erecting street light Wall bracket made from 25 mm. dia ' G.l. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.I. cover complete with all materials, testing &

Providing pipe type earthing with 40mm. dia. C.I. pipe or 20 mm dia. G.l. Rod complete with all materials testing and recording the results dS pet specification hÖ. EA-EP

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (lcn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (lcn) 10kA in provided distribution board as per specification no. SW-SWR/MCBB

Supplying and erecting Gl sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to be used for fabrication of boxes panel boards etc Inculding cutting bending drilling welding riveting etc and painting with one coat of red lead paint and 2 coast of enamle paint

Supplying and erecting marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws. wall fasteners. suooorts. nut bolts etc.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/Gl frame (horizontal busbar type) as per specification no. SW /MCBDB

Supplying and erecting ISI mark Gl pipe 25 mm. dia. 'B' class at position with accessories complete as per specification no. CWPLB/GP.

Supplying and erecting ISI mark GI pipe 40 mm. dia. 'B' class at position with accessories complete as per specification PLB/CP

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road

Supplying & erecting 18 guage M.S. Box powder coated (4'\4") 3 way for mains connection

Supplying & erecting Siemens type brass cable glands for 3 to 4 core 6 sq. mm. /2 to 4 core 10 sq. mm. for XLPE armoured cable as per specification No. CB-GL

22 Supplying shockproof type hand lamp with lamp holder, bulb/ lamp 100 W guarded glass and 30 mtr. 3 core PVC flexible cord with hand shield type 3 pin 6 Amp. Plug top

Point wiring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per

Supplying and erecting Street light bracket made from 25 mm. dia _B' class G.l. Pipe, 0.6 m in length along with pole cap of 300

Supplying & erecting mains with 2 x 2.5 Sq.mm stranded copper PVC wire in PVC casing caping 20 MM on Wall/Ceiling

Supplying & erecting main with 2 x 4.00 Sq.mm stranded copper PVC insulated wire with 2 x 1.5 Sq.mm copper PVC wire in PVC

Supplying and erecting double pole switch surface type/ flush type 240V, 32A with indicator lamp & fuse as per specification no. SW-SWR/BDP

Supplying and erecting double pole metal clad switch withHC type fuse and neutral link 240V, 32A on iron / Gl frame as per specification no. SW-SWR/MDP

Supplying & erecting 3W, 230V integral type LED Lamp suitable for B-22 / E 27 base.

Supplying and erecting T8 Fluorescent tube day light 1200mm, 36 W

Supplying & ereetihg ready to use Rétföfit T8 LED '18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T 12 LED luminaire by disconnecting starter & ballast if necessary.

SSupplying and erecting regular/ standard model ceiling fan of 900 / 1050 mm. sweep complete erected in position as per specification no. FG-FN/CF

Supplying and fixing wire mesh (Jali) cover suitable for fitting / fan or for any purpose, complete with necessary materials. The jali cover shall be made from good quality G.l. wire mesh size 25 x 25 (mm) and made up of 14 SWG G.l. wire with side / supporting MS strips of Suitable size.

Supplying and erecting ding dong / electronic musical type call bell with heavy duly coil suitable to operate on 230V A.C, supply erected on polished double wooden block/sunmica block of suitable size

Supplying and erecting street light Wall bracket made from 25 mm. dia ' G.l. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBQ complete erected on angle iron/Gl frame

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers 40A in provided of distribution board.

S W. IV INTERNAL BITUMINOUS ROAD

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or slacking us directed.

Excavation for catch/side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

Excavation tor catch/side water gutter in Hard murum and boulder strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed,

Watering and compacting the embankment formed of materials obtained from lhe rood cotting,depöftmentåi iond Other sources within a lead of 50m. After laying them in layers of 20cm to 30 cm with 3% camber and design superelevation etc.complete (Compaction with power roller.)

Compacting the Hard murum/Kankar for all width (200mm loose) with roller including necessary artificial watering Complete ( By Vibratory Roller)

Supplying trap/granite/quadzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete (Prior approval of sample stack of broken meta! by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)80 mm Metal, By breaking Boulders (Hand broken)

Supplying •trap/granite/quartzite/gneiss stone metal of required size by bringing thc boulders / Rubblc at thc road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking Boulders (Hand broken)

Supplying Hard murum /kankar at the road side,including conveying and stacking complete

Supplying Soft murum /kankar at the road site,including conveying and stacking complete

Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compacting the Hard murum/Kankar for all width (200mm loose) with roller including necessary artificial watering Complete

Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.

Compacting the sub grade / gravel / size metal (100 mm loose) layers for al} widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.

Providing and constructing 50 mm; thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ .75 kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates )

16 Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired but exciudihg Piime / tock dhd Seai For Bitumen of specified grade—USING Batch mix type hot mix plant with SCADA, Paver and Vibratory roller( over BT Sutface) (VG-30 bulk bitumen rates are considered to arrive at rates)

9 MM SEAL COAT: Providing and laying of Type A 9rnrn premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ I .2kg/Sq.m, preparing existing road surface by mechanical means, spreading chips and rolling, by static roller having weight 8 lu 10 MT. etc. complete. (VG 30 bulk bitumen rates are considered to arrive at rates)

Providing and fixing stream lined M-20 grade RCC guard stone including mild steel bar reinforcement etc. complete

SWV ROYALTY

Other Metal

SW. VI LAB TESTING

M20 CONCRETE: Concrete Mix Design (With all Tests on basic materials)

M20 CONCRETE: Compressive Strength OF C.C. Cube (Set of 3

M10 CONCRETE: Compressive Strength OF C.C. Cube (Set of 3 cubes).

BRICKS : Water Absorption (Set of 5 Bricks), Compressive strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks)

TMT STEEL : (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

Sand :- i) Fineness Modulus, II) Silt content

Murum :- ii) Atterberg Limit iii) Density of compacted layeriv) Proctor Test

Bitumen Penetration, Softening Point, Flash & Fire Point, Specific Gravity, Viscosity.

Crushing Value/Compressive Strength, Water Absorption & Specific Gravity,

Cement Test i) Comprecive strengh ii) Intital and final setting time iii)Spcific Gravity iv) Spicific Gravity v) soundness vi) Finess

METAL Gr I & Gr II Agrregates AIV Test, Gradation,Water Absorpation Test,Crushing Value

Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct

YASH ANIL MANDOWARA (BID ID -6895655)