Repair to steel furniture at BRD areas Tughlakabad and DGQA Complex Badarpur, AF Stn Tughlakabad

Amount

Charpoy GI pipe (FD-220) Taking out unserviceable/ broken long rail from Charpoy GI pipe and S&F new long rail 32mm bore medium grade ISI marked as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable/broken short rail from Charpoy GI pipe and fixing short rail made out of long rails retrieved out of Srl Item 1 above as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable/broken leg from Charpoy GI pipe and fixing leg made out of short rails retrieved out of Srl Item No 2 above. Bottom of legs shall be plugged/welded with 5mm thick MS plate as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable/broken 3 way elbow from Charpoy GI pipe and S&F new 3 way elbow of 32mm bore ISI marked as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable/broken GI check nut from Charpoy GI pipe and S&F new check nut of 6mm thick 32mm bore as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable plastic/nylon newar from charpoy GI pipe and S&F Plywood of size 1980 x 900 mm of 12mm thick MR grade. Fixing on the top of GI Charpoy with suitable flat headed bolt, nut and washers 08 Nos of suitable size as per requirement including provision of 02 Nos stiffeners made out of 35x6mm flat iron duly painted with two coats of black paint over a coat of red oxide primer all as per sample kept in BSO yard complex. All as specified and directed by Engr-in-Charge.

Taking out unserviceable ply top from charpoy GI pipe and S&F of new Ply of size 1980 x 900 mm of 12mm thick MR grade. Fixing on the top of GI Charpoy with flat headed bolt, nut and washers 08 Nos of suitable size as per ground requirement including provision of 02 Nos stiffeners shall be provided made out of 35x6mm Flat iron duly painted with two coats of black paint over a coat of red oxide primer all as per sample kept in BSO yard complex all. All as specified and directed by Engr-in-Charge.

Teapoy Verandah (FD-383, 255) & FD/E6/MAP/17 Taking out unserviceable top from Teapoy verandah and S&F new top made out of pre-laminated particle board both side white shade exterior grade 18mm thick including 4mm thick teak wood beading all around the top as per existing shape & size complete all as shown in drg & directed by the Engr-in-Charge.

Taking out unserviceable rubber shoes from leg of Teapoy verandah and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Table office clerk steel (FD-84 & 1004) Taking out of unserviceable top from Table office clerk steel and S&F new top made out of pre-laminated particle board of one side teak face, exterior grade of 18mm thick including fixing of 4mm thick teak wood beading all around the top as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable drawer from the Table office clerk steel and S&F new drawer made out of 1mm thick mild steel sheet throughout as per the existing drawer complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable lock from the table office clerk steel and S&F new brass lock of 04 levers with duplicate key complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable rubber shoes from the legs of Table office clerk steel and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shoes complete all shown in drg and directed by Engr-in-Charge.

Table office Officer steel (FD-84 & 1003) Taking out unserviceable top from the Table office officer steel and S&F new top made out of pre-laminated particle board of one side teak face exterior grade of 18mm thick including fixing of 4mm thick teak wood beading all around the top as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable drawer from Table office officer steel and S&F new drawer made out of 1mm thick MS sheet throughout as per the existing drawer complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable lock from the table office officer steel and S&F new brass lock of of 04 levers with duplicate key complete. All as shown in drg.

Taking out unserviceable rubber shoes from the leg of Table office officer steel and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Stool revolving steel adjustable (FD-103) Taking out unserviceable mild steel plate from stool and S&F new mild steel plate of 100mm dia 6mm thick by way of welding as per the existing shape & size duly applying two or more coats of approved paint to match with the existing complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable seat from stool revolving steel adjustable and S&F new seat made out of seasoned hard wood 38mm dia of 25mm thick with foam having 32 density of 50mm thick duly covered with approved rexene cloth of 1.2 mm thick of cost not less than Rs 125.00 per Sqm shall be used in seat as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable rubber shoe from leg of stool revolving steel adjustable and S&F new rubber shoe (Set of 04 Nos) of best quality as per the existing shoes complete all shown in drg and directed by Engr-in-Charge.

Almirah large /Medium steel with shelves (FD-67,1031 & 1032) Taking out the unserviceable lock from the Almirah large/ medium steel and S&F new brass lock, six levers godrej pattern with duplicate key of approved quality complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable handle from Almirah large/medium steel and S&F new handle of chromium plated of CP size 100mm long with 25mm long steel pin, to make 3 way locking system operational, of approved quality complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable steel clamp from the almirah large/medium steel and S&F new steel clamp including fixing of loose shelves as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable locking device from Almirah large steel and S&F new 3 way locking device including MS rod 10 mm dia of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable locking device from Almirah medium steel and S&F new 3 way locking device including MS rod of 10 mm dia of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Cabinet filing Steel /Cabinet to hold cards/cabinet cordex steel (FD-67) Taking out unserviceable handle from the cabinet and S&F new handle chromium plated size 100mm long of approved quality complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable lock from cabinet and S&F new brass lock of six levers with duplicate key as per trade pattern including repair to complete locking device with rolling function smoothly complete all as specified and directed by Engr-in-Charge.

Chair revolving lab cum computer with or without arm/off size/any type (TP) Taking out unserviceable wheel Base from any type of chair revolving and S&F new wheel base of different types as per trade pattern with existing shape & size of 600 to 650 material complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable hydraulic assembly from chair revolving and S&F new hydraulic assembly of capacity 100 Kg as per trade pattern to make the chair functional as per existing shape and size complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable tapestry cloth, foam cushion and plywood from seat & back of chair revolving and S&F new tapestry cloth of approved quality & shade of cost not less than 250 per Sqm including replacement of the foam cushion of 75 mm thick and 12mm thick plywood etc. as required complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable hand rests from chair revolving and S&F new hand rests (set of 02 Nos for left and right each) as per the trade pattern of the existing hand rest made out of polyurethane with 75-85 shore 'A' hardness reinforced with MS and weather and scratch proof complete all as specified and directed by Engr-in-Charge.

Chair office/visitor / Executive (TP) Taking out unserviceable tapestry cloth from seat & back of chair office/visitor and S&F new tapestry cloth of approved quality & shade of cost not less than Rs 250.00 per Sqm including replacement of foam cushion of 75 mm thick and plywood of 12 mm thick etc. as required complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable hand rests from chair Office/visitor and S&F new hand rests (set of 02 Nos for left and right each) of as per trade pattern of the existing hand rest made out of polyurethane with 75-85 shore 'A' hardness reinforced with MS and weather and scratch proof complete all as specified and directed by Engr-in-Charge.

Chair revolving office officers high back with PU arm (TP) Taking out unserviceable wheel base from any type of chair revolving and S&F new wheel base as per trade pattern made out of metallic powder coated & metal base and the existing complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable hydraulic assembly from chair revolving and S&F new hydraulic assembly of capacity 100 Kg as required as per trade pattern and the existing to make the chair functional complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable Leathrite or tapestry cloth from seat & back of chair revolving and S&F new Leathrite or tapestry cloth of approved quality & shade of cost not less than Rs 300.00 per Sqm including replacement of foam cushion of 75 mm thick and plywood of 12 mm thick etc. as required as per the existing complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable hand rests from chair revolving and S&F new of hand rests (set of 02 Nos for left and right each) of as per trade pattern of the existing hand rest made out of polyurethane with 75-85 shore 'A' hardness reinforced with MS and weather and scratch proof complete all as specified and directed by Engr-in-Charge..

Book case steel (FD-90 & 1028) Taking out unserviceable lock from Book case steel and S&F new six lever brass lock with duplicate key of approved quality complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable handle from Book case steel and S&F new chormium plated steel handle of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable glass from the Book case steel and S&F new plain glass of 4mm thick of approved quality matching with the existing glass complete all shown in drg and directed by Engr-in-Charge.

Locker bed side steel (FD-257 &1029) Taking out unserviceable hasp & staple from Locker bed side steel and S&F new hasp and staple of size 75x40x4mm of approved quality complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable handle from Locker bed side steel and S&F new chromium plated steel bow handle of 100mm long of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable hanging rod from the Locker bed side steel and S&F new chromium plated steel hanging rod of 19mm dia approved quality complete all shown in drg and directed by Engr-in-Charge.

Chair tubular steel with and without arms (FD-75) Taking out the unserviceable seat from chair tubular steel and S&F new seat made of hard wood shisham duly canned with 2mm wide plastic cane half round type as per Godrej pattern and duly applying two or more coats or french polish complete all as specified and directed by Engr-in-Charge.

Taking out the unserviceable back from the chair tubular steel and S&F new back made of hard wood shisham duly canned with 2mm wide plastic cane half round type as per Godrej pattern and duly applying two or more coats or french polish complete all as specified and directed by Engr-in-Charge.

Taking out the unserviceable flat iron from the chair tubular steel and S&F new flat iron of size 25x3mm as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable hand rests from chair tubular steel and S&F new hand rests (Set of 02 Nos) made out of hard wood shisham of existing size duly applying two or more coats or french polish of in required shade complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable Caps and rubber shoes from chair tubular steel and S&F new caps & rubber shoes (Set of 02 Nos Caps and 04 Nos rubber shoes) of best quality matching with the existing complete all shown in drg and directed by Engr-in-Charge.

CHAIR VARANDAH Taking out the unserviceable leg from the chair verandah and S&F new leg (front or rear leg) made out of 19mm MS Tube of 1.6 mm wall thickness along with hard rubber shoes at the bottom of legs complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable mild steel round bar from front and back side and S&F new mild steel Bar round of 10 mm dia shall be welded to both front and back side legs of chair Varandah complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable hard rubber shoe from chair verandah and S&F new rubber shoe (Set of 04 Nos) of approved quality in white colour complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable cane from the chair verandah, supply & re-canning with new cane of 4mm wide as per Mat pattern complete all shown in drg and directed by Engr-in-Charge.

M&L for preparation of old painted surfaces by rubbing down with emery paper clean thoroughly to remove all dust/oily spots, dentings etc and applying one coat of synthetic enamel paint of existing shade with mechanical spray gun of all sides and inside with shelves door shutters for Almirah large steel complete all as specified and directed by Engr-in-Charge.

All as per Sl item No 53.00 but for Steel Almirah medium size.

All as per Sl item No 53.00 but for Steel Book case.

All as per Sl item No 53.00 but for Teapoy verandah.

All as per Sl item No 53.00 but for Table office clerk.

All as per Sl item No 53.00 but for Table office officer.

All as per Sl item No 53.00 but for Steel Locker bedside.

All as per Sl item No 53.00 but for Steel Chair tubular.

All as per Sl item No 53.00 but for Chair verandah.

Notes: The amount of Rs 5,168.50 against schedule of credit given on Tender Serial Page No 32 shall be deducted from the total amount quoted by the contractor against BOQ while deriving the contract sum for acceptance.

M/s Kapil Furniture

M/S NEHAL ENTERPRISES