REPAIR TO INTERNAL WATER SUPPLY AND LEAKAGE SEEPAGE IN TOILETS WITH ALLIED WORKS AT SANJOG CHETRI VIHAR AND REPAIR/ MAINT TO JOINERY, TILING IN TOILET, KITCHEN AND BATHROOM IN MD ACCN AREA OF AGE B/R-II UNDER GE (EAST) LUCKNOW

Amount

M&L for jointing only for 100 mm bore cast iron pipes and fitting to PVC pipes in repair with epoxy based polymer and making joints leakproof complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including 25x5 mm MS holding clamps complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including 25x5 mm MS holding clamps complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair CP grating 100 mm dia complete all as specified and directed.

Cutting holes into or through in brick walls built in cement mortar area exc 0.15 sqcm but not exc 0.40 sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 , type B-1 as required complete all as specified and directed.

S&F in repair viterous china wash down water closet pan (Pedestal pattern) with 'P' or 'S' trap including connection to trap, flushing pipe, anti syphonage pipe and cistern and WC seat cover closed pattern with flat bottom and cover with mild steel chromium plated or aluminized hinging device and finally making good disturbed surface of floor complete all as specified and directed.

S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, ISI Marked, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.

S&F in repair viterous china wash hand basin white flat back type of size 550x400mm including cutting for and pinning in ends of brackets and fixing in walls including 32 mm dia chromium plated waste fittings/couplings, PVC waste pipe and MS brackets complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair 15 mm bore uPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc , any type of pipe complete all as specified and directed

S&F in repair 20 mm bore uPVC pipes of pressure rating 10 kg/cm2 fixed complete to walls, ceilings or in floors etc ,any type of pipe complete all as specified and directed

Making connection of PP-R distribution branch with PP-R main of size 16 to 40 mm outer diameter by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

Cutting chases pining in brick, concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting not exc 10 cm girth complete all as specified and directed.

S&F in repair 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore angle valve /stop valve chromium plated fancy type cast copper alloy screwed down high pressure, crutch or butterfly handle, screwed both end for pipe or for unions complete all as specified and directed.

S&F in repair stop valves, 15mm dia, cast copper alloy, CP fancy type with long shank and cup (concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F in repair 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair brass spindles suitable for 15 mm bore bib taps, pillar taps complete all as specified and directed.

S&F 32mm bore brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F in repair 15mm dia two way bib taps, cast copper alloy chromium plated fancy type handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair CP brass health faucet not exc 1.25 m long flexible tube including wall hook complete all as specified and directed.

S&F in repair CP brass jet spray with flexible tube complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc using bleaching powder, capacity of water tank exc 250 not exc 500 ltrs and writing the date of cleaning in format 'CLD ON MM-YY' with synthetic enamel paint in height not exc 50 mm and length not exc 300 mm complete all as specified and directed.

S&F for 500 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts and including dismantling of existing tank and float valve complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket gaurd & railing 60 cm long complete all as specified and directed.

S&F in repair 15mm dia CP brass Shower rose with arms complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for anodized aluminium snap grid size 605 x 605 mm of frame work for false ceiling complete all as specified and directed.

S&F 4 mm thick E-board(ceiling board ) of size 600 mm x 600 mm , white prelaminated sheet embossed reinforced designer as approved at any height complete all as specified and directed.

All as per item No 35 but except E-board . Note:- Old serviceable E-board obtained from Item No. 33 shall be used .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.50 sqm each and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but not exc 4 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description area exc 1.00 sqm but not exc 2 sqm each and refixing in the same opening including easing and adjusting of door shutter as required including renewal of unserviceable screws complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but not exc 2.00 sqm each complete all as specified and directed.

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc. including filling with concrete type B0 1:2:4 (12.5 mm graded aggregate) complete all as spcefied and directed.

S&F pressed steel frame for door with one or more rebates of size 105 x 60 mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc. including filling with concrete type B-0 , 1:2:4 (12.5 mm graded stone aggregate) complete all as spcefied and directed.

S&F for 30mm thick factory made flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as spcefied and directed.

S&F for 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

S&F for factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame complete all as specified and directed.

S&F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed and welded, complete all as specified and directed.

S&F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed.

S&F for steel ventilator with top hung shutter including box type hinges, peg stay and glazing bars complete with dovetailed or welded, complete all as specified & directed.

S&F for 100 mm size butt hinges of stainless steel ,medium weight complete all as specified and directed.

S&F for 100 mm type butt hinges, type B-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodized complete all as specified and directed.

S&F in repair 100 mm butt hinges, type B-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F 150mm long aluminium handles cast type, anodised, complete all as specified and directed.

S&F in repair 150mm long aluminium handles cast type, anodised, complete all as specified and directed.

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F for aluminium alloy, anodized, sliding door bolt, 300mm long, with hasp and staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolt , plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repair 300 mm long mild steel sliding door bolt , plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed.

S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed (Note:- Fixed with screws or welding as required).

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed Note:- Fixed with screws or welding as required .

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with aluminium wire staples or tinned tack or flat iron as required, complete all as specified and directed. Note:- Any welding work, if required will be included .

Taking down old wire cloth from any section and S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40 mm with tinned tack/welding/bolting/beading in steel/wooden door/window/ ventilator and making good the disturbed portion during execution complete all as specified and directed.

S&F for 140mm long floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair for 140 mm long floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for prepration of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10 cm width or girth, not oterwise described, complete all as specified and directed.

M&L for welding works for repair not exc 2.5 cm in length complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F for 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F for 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane, complete all as specified and directed.

S&F in repair 22-25 mm dia PVC coated, MS curtain rods with and including fixing of two Nos MS brackets and decorative type PVC knobs at both ends of curtain rod complete all as specified and directed.

M&L for brick work using old size fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6), including demolition of old brick work complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:4 mixed with WPC liquid as per manufacturer's instruction, finished surface even and fair with out using extra cement, complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work in CM (1:6) surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 as in ceiling ,soffits of slab and finish the surface even and smooth without using extra cement complete all as specified and directed.

M&L for three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper on wall surface over a coat of wall care putty, complete all as specified and directed.

M&L for preparation of newly plastered wall surface and applying two coats of cement base paint on surfaces of walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc, laid over 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles (joint free) of size 300x600x7/300x450x7mm thick over 10mm thick plaster in CM 1:3 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 40 mm thick plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in floors/roof complete all as specified and directed.

M&L 40mm thick plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floors/roof, surface finished even & smooth using extra cement complete all as specified and directed.

S&F in repair 20mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe of 20 mm bore complete all as specified and directed.

S&F for 15mm dia steel water GI tubing medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/PVC pipe complete all as specified and directed.

S&F for 20 mm dia steel water GI tubing medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/PVC pipe complete all as specified and directed.

S&F in repair 0.56 mm Plain Aluminium sheeting alloy 31000H4 in straight flashing of door complete all as specified and directed.

M&L for water proofing treatment to roofs surfaces including a coat of cold applied bituminous primer @ 0.30 Lit per sqm ,evenly on roof surface and a coat of hot blown bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3 mm thick APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm) unrolled and bonded completely to the substrate with side over lap of 75 mm & end over lap of 100 mm and then scaled/ fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane as per manufacture's instruction and finally it will be finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm, including removal of old roof treatment complete all as specified and as directed.

M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 ,Gde-E-165 complete all as specified and directed.

R K CONTRACTOR AND SUPPLIERS

M/S SWATI CONSTRUCTION

PARAMOUNT ENGINEERS

JITENDRA SINGH