MAINT OF RESIDENTIAL AND OFFICE ACCN OF DPDO/LAO/ZO PD IN AOR OF AGE BR-I UNDER GE(WEST)PATHANKOT

Amount

Sch 'A' Part-I B/R Portion:- Taking down Aluminium chawkhats or frame (w/o taking off shutters from the frames) exc 1.50 Sqm and n.exc 4 sqm each complete all as specified and directed.

Taking down chowkats without taking off shutters of any type (Window and door) from the frame area n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats without taking off shutters of any type from the frame exc.1.50 Sqm and not exc. 4.00 Sqm complete all as specified and directed.

Taking down shutters of any description exc. 1.00 Sqm & n.exc 2 sqm and refixing in the same opening complete.

S&F aluminium section in doors/windows/ventilators partition ,any type, powder coated in approved colour (Thickness of powder coating not less than 50 micron), aluminium section (medium weight of series 'B') or section as directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including rubber beading or gasket for aluminium sections for fixing glass/XPM jali and all necessary fittings complete, screws, plugs for fixing screws, etc all as specified and directed (Make : JINDAL/HINDALCO) Notes : (i) Weight of aluminium sections shall only be measured.

S&F Anodised aluminium door /window shutters, aluminium section weighing 0.55 kg/ m including rubber beading or gasket for aluminium sections for fixing glass necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door/window , hinges, anodised aluminum snap beading screws etc. section as directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including rubber beading or gasket for aluminium sections for fixing glass/XPM jali and all necessary fittings complete, screws, plugs for fixing screws, etc all as specified and directed (Make : JINDAL/HINDALCO)complete all as specified.→

S&F Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow' section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10 mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast, including plain/figured glass 3mm thick and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples`etc complete all as per details shown in drawing No CEPZ/C-TD/032/13 sheet No 1/2 & 2/2 including taking down existing spoiled and unserviceable windows/ventilators of any type ( wooden/steel) complete all as specified and directed

Supply only sheet glass 4.8 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed complete all as specified and directed.

S&F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete as specified and directed.

Supply only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S&F for Pressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

S&F for Pressed steel door frame of size 125x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

S&F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm plain framed pannelled shutters of 2nd class HW 35mm thick with panel of 12mm thick ply wood(BWR Quality) and styles as per IS 1003(part-I) all as specified. ISI marked.

S&F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed.

M&L for painting with synthetic enamel paint of two coats over a coat of primer on new wooden surfaces of any description exc. 10 Cm width or girth including prepation of surfaces.

M&L applying one coats of synthetic enamel paint on old wooden surfacesof any desccription exc. 10cm width or girth incl. preparation of surfaces.

M&L for MS hold fast size 25x6mm FI fixed to chowkats.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in bed blocks for hold fasts.

S&F stainless steel butt hinges medium weight 100mm long.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long.

S&F in repair aluminium anodised barrel tower bolts of extruded section 200 mm long including taking down shutters of any description and refixing in the same opening complete.

M&L extruded aluminium alloy handles, fabricated type, anodised 200 mm size.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised 200 mm size.

S&F alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300 mm

S&F in repair alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300 mm

Dismantling wall and ceiling boards fibre, pulp insulation etcor insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. Note :- PVC frame shall be measured and paid for separately.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys bldgs height if required at site including cleaning of drops, splashes and leaving premise clean and tidy & removing of debris complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of brick work ,wall , concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement including necessary scaffolding up to four storeys bldgs height if required at site including cleaning of drops, splashes and leaving premise clean and tidy complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint in any tint without any brush marks on the surface & matching with existing work over and including one coat of primer (as per manufacturer’s recommendations) including necessary scaffolding any height if required at site including cleaning of drops, splashes and leaving premise clean and tidy complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint in any tint without any brush marks on the surface & matching with existing work over and including one coat of primer (as per manufacturer’s recommendations) including necessary scaffolding any height if required at site including cleaning of drops, splashes and leaving premise clean and tidy complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work ,wall, concrete surface of wall, surface even and smooth without using extra cement including necessary scaffolding up to four storeys bldgs height if required at site including cleaning of drops, splashes and leaving premise clean and tidy complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over one coat of alkali resistant primer smooth finish.etc complete all as specified and directed .

M&L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper with roller over one coat of alkali resistant primer smooth finish.etc complete all as specified and directed .

M&L for 5 mm thick rendering on brick work or concrete surfaces in CM 1:3 as in ceiling of roof slab ,fin, facia, culvert, chajjas, parapet and similar article etc finishing surfaces even and smooth without using extra cement including necessary scaffolding up to four storeys bldgs height if required at site including cleaning of drops, splashes and leaving premise clean and tidy complete all as specified and as directed.

M&L for Preparation of new surfaces of ceiling and application of three coats of white washing completed as specified and directed.

M&L for Preparation of old surfaces of ceiling and application of three coats of white washing completed as specified and directed.

Supply only liquid water proofing compound all as specified and as directed.

Demolition of brick work built in CM incl. taking out roots vegetation if any at any position and removal to out side MD land

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM(1:6) complete all as specified

Dismantling stone slabs or pcc tiles of any description or thickness in steps, landing, flooring and similar work laid, bedded and pointed in cement mortar complete.

M&L for 18-20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform,flooring, gate pillars ,and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite & all open edges to be half rounded over including 15mm thick screed bed or bedding layer in cement mortar 1:4 including dismantling of existing stone slab etc complete all as specified and directed.

Taking up or down 15 mm bore GI tubing from wall, floor, ceiling.

Taking up or down 20 mm bore GI tubing from wall, floor, ceiling.

S&F GI tube medium grade of 15 mm bore with all fittings and fixed complete to walls and ceilings or laid in floors etc

S&F GI tube medium grade of 20 mm bore with all fittings and fixed complete to walls and ceilings or laid in floors etc

S&F in repair 25mm dia Harrison rails/curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers including two or three brackets and two knobs for each window .etc complete as in repair.

S&F in repair stainless steel kitchen plate rack made of 1.00 mm thick sheet of size 24"x24" incl shelves, rod to put plates etc and fixed to wall complete all as specified.Make:Nirali or equivalent.

S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed.Make :Nirali or equivalent

S&F in repairs vitreous china wash down water closet pan (padestal pattern), white complete including seat cover and connection to trap and to flushing pipe, anti syphonic pipe etc., complete all as specifiedand directed.

M&L Wash basin, Vitreous China white (Flat back) 630 x 450mm including brackets,, pinning in ends of brackets or erecting stand including fixing of waste pipe and pillar type etc ( Suppy of pillar tap and waste pipe shall be measured separately) complete all as specified and directed.

S&F in repair pillar tap 15 mm bore cast copper alloy chromium plated fancy type complete all as specified and directed.

S&F waste fitting of 32 mm bore, brass, chromium plated for glazed ware wash basin etc

S&F in repair angle cock 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.

S&F in repairs bib tap 15mm bore fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions complete all as specified and directed...

S&F 15mm size PVC connection with PTMT nuts 450mm length complete all as speified and directed.

S&F in repair chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.

S&F in repair CP brss Tubular towel rail with hook 20 mm dia 600mm long between flanges of fixed with and including chromium plated brass screws and wooden/plastic screws. complete all as specified and directed.

S&F 32 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 PVC bends including all necessaryfixed complete to walls, ceilings or in floors etc.

S&F cast iron Nahani trap in floors with grating including jointing to waste pipe of 100 mm dia in cement concrete type B1 (1:2:4) fixed in repairs.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

M&L for PCC 40mm thick type B-0, 1:2:4 (12.5 mm graded crushed stone aggregate) in sub flooring complete all as specified and directed..

M&L for Non abrasive paving cement concrete coloured tiles 300 mm x 300 mm x 10 mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15 mm thick screed bed in cement mortar 1:4 including demolition/dismantling old surface/tiles complete all as specified and as directed. Note:-The texture , colour, size ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE.

M&L for Non-Skid ceramic coloured tiles 7 to 8 mm thick (square/reactangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, in floor finishes set and joineted in neat cement slurry and pointed in white or colured cement to match over incl 15 mm thick screed bed in cement mortar 1:4 including finishing even and fair complete all as specified.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not excceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6.

M&L for glazed ceramic jointless coloured tiles in vertical surface 450 x 300 x 7mm set and jointed in neat cement slurry over and including provision of backing layer 10mm thick in CM 1 : 3 complete all as specified and directed.

Demolition of the concrete of any description and in any position not otherwise specifically over roof slab completely including throughly cleaning complete all as specified and Removal of the demolished material to outside MD land.

M&L for PCC 1:2:4 Type B-0 (using 12.5 mm graded crushed stone aggregate) as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc all as specified and directed.

Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 500 ltr but not exc 1000 ltr complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.in cluding taking down complete all as specified

S&F PVC (SWR) floor trap plain with grating lincluding jointing with solvent cement 110 mm dia all as specified.

S&F in repair 4mm thick figured glass/pin headed type ordinary quality fixed in aluminium ventilator all as specified & as directed by EIC.

S&F in repair only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S&F in reapir magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

S&F in reapir Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed.

S&F in repair door closer Aluminium die cast body Hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg complete all as specified and as dierected.

S&F in repair Floor door stopper of SS/Brass body and tongue.anodized with hard drawn steel spring fixed in floor(length of cover plate 150 mm)

S&F in repair Floor door stopper , any type fixed to plugs chromium plated brass screws complete.Make:Cera or equivalent.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.Make:Cera or equivalent.

S&F in repair Sintex water tank cover (Dhakkan) tied with wire for 500 and 1000 Ltr capacity water storage tank.

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. make Prayag or eqvl.

S&F in repair CP Grating With Hole/ Without Hole 100mm dia fixed with cement.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm

S&F in repairs Peg stays to steel windows.

S&F in repair mild steel handles to steel windows all as specified and directed

S&F in repairs 32mm bore, flexible, PVC waste pipe 900 to 1000mm fixed in sink.complete all as specified and directed.

S&F in repairs 40 mm bore, flexible, PVC waste pipe 900 to 1000mm fixed in sink.complete all as specified and directed.

S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as spd

S&F in repairs 32 mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed

S&F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete. make cera or equivalent

S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete.

S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated up to 900 to 1000mm door opening complete all specified

S&F in repair MS Rat tail pattern/ helical doors spring 150 to 200 mm, ordinary springs including roller and roller plate complete all as specified and directed.

Sch 'A' Part-I E/M Portion:- Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators and sockets by unscrewing carefully from boards etc and making good disturbed surfaces of walls, as per existing finishes complete all as spd and directed.

M&L for point wiring for one light/one fan controlled by one switch with 1.5 PVC insulated unsheathed multistrand copper conductor FRLS-H cable in existing PVC concealed conduit including new anodise pressed steel sunken box ISI marked with bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed boxes and making good disturbed surface to match with the existing surface complete all as specified and directed.

All as per Srl Item No 102 here-in-before but for call Bell point complete all as specified and directed.

All as per Srl item No 102 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.

All as per Srl item No 102 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M&L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable in existing PVC concealed conduit including new anodise pressed steel sunken box ISI marked with bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed box and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.

S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

S&F Bell Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge.

S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

S&F ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.

S&F LED bulb, B22 type ,14 watt,complete all as specified and directed.

S&F in replacement sleek LED Batten light fitting 1x20 W (cool white) including inbuilt driver. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed.

S&F LED flood light fitting 50Watt, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 protection with high power LEDs as light source, suitable for highlighting architectural features on existing high mast poles/wall/any position or place on existing/new place and making connection with provision of PVC insulated copper conductor (multistranded) cable of suitable size complete all as required at site or directed.

S&F in replacement bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length not less than 0.9 mtr fixing with clamp etc and making connections using flexible copper cable of suitable size from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.

S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F in replacement MCB SP 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F in replacement MCB SPN 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F in replacement MCB SPN 240 volts any rating 63 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F in replacement of existing unsv sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps 'C' curve complete all as specified and directed .

S&F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 100 Amps AC 415 VOLTS 25 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing (Note :- (i) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(ii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(iii) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (iv) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (v)MCCB's and MCB's should have a same make as of DB.

S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 6 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed.(Note - Two runs of sub main wire, one run of earth wire and one run of PVC rigid conduit shall be measured as one running meter.)

All as per srl item No 127 here-in-before but submain wiring with 2 single core 4 sqmm and one 4 sqmm as eathing lead.above but 4.00 Sqmm

M&L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 05 of SSR -2009 Part I and connecting to existing earth test point complete all as specified and directed or including testing on completion.(Note: Excavation and earth work is deemed to be included in the rates quoted).

S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including inbuilt driver. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed.

M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller steel body AC ventilating fans, Single phase, 230 volts 300 mm sweep(900 RPM) complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.

Supply and installation in repair electric water storage heater of ABS body type, 25 ltr capacity with rated power 2KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15mm bore with GI hexagonal adopters/nuts on both sides for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangements and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and as directed.

Attending of day to day Repair and maintenance and making the continuity of supply after rectify the faults of the eletrical items such as switches, socket, regulator replacement of fuse wires , distribution boards MCB (light/Power) lamp holders (bracket/Pandents/ batten) bell/ buzzer, push button, ceiling rose capacitors and other similar electrical items/ fittings etc, including providing of small pieces of electrical wire if required of size 1.5 sqmm to 2.5 sqmm single core and length notexceding 0.50 mtrs complete all as specified and directed by Engineer-in-Charge. (Note:- (i) any accessories found unserviceable that shall be paid as supply & Fixing under respective item No. 182 to 198 of this Sch 'A' . (ii) one job only will be considered for each bldg/Qtr per day irrespective of the No of points made serviceable. (iii) The area for attending the complaints are OTM Accn under AOR of the GE (W) pathankot. (iv) Each complaints attended/ rectified shall be measured as one job. (v) The contractor shall depute necessary man power on daily basis for rectifying the jobs including Sundays & holidays. (vi) Complaint slips/job card books ( as per format given by MES) in duplicate with machine made Srl. no. and date etc for recording day to day complaints & complaint register ( as per format given by MES) will be provided by the contractor at his own expense during currency of the contract. All complaint slips / Job cards books etc always shall be kept with JE E/M in complaint cell. (vi) Contractor /Rep will updtae the complaint register such as pastin of duplicate job slips in books , summary of qty balance in r/o CA qty on daily basis as directed. (v) Cost of taking down of defective item under ser item No 182 to 198 deemed to be included in this item

S&F Socket outlet 2 in 1, 3 pin, 5A complete in existing circuit complete as directed buy Engr-in-charge.

S&F switch piano flush button single pole one way 5 Amp 230 volts in existing circuit as directed buy Engr-in-charge.

S&F socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S&F Switch Bell push, flush type, 5 amp one way complete all as specified and directed by Engr-in-charge..

S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type, 230 volts complete all as specified and directed by Engr-in-charge..

S&F Switch socket combination 2 in 1, 3 pin, 6 Amps flush type, 230 volts complete all as specified and directed by Engr-in-charge..

S&F Buzzer Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge.

S&F LED decorative wall light fixture made up of polycarbonate, suitable for retrofit LED lamp alongwith 12W LED lamp complete all as specified and as directed.

S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings in existing circuit complete all as specified and directed.

S&F ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.

S&F sleek LED mirror light fitting 2 feet long 1x10 W including inbuilt driver. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed.

S&F Gang Box 15 Amp Switch socket combined complete all as specified and directed by Engr-in-charge.

S&F Gang Box 5 Amp Switch socket combined complete all as specified and directed by Engr-in-charge.

S&F MCB SP 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

S&F MCB SPN 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F MCB SPN 240 volts any rating from 63 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F sleek LED Batten light fitting 4 feet long 1x20 W including inbuilt driver(cool white). complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed.

Maintenance of storage type electric water heater capacity 25/50 ltr comprising of the following activityes:- (a) Taking down making by disconnecting electric and water connection and maling visual inspection opening and dismantling, de-scaling, brushing and cleaning of storage tank of any type and checking of each item for its servicieability and re-assembled the same after neccessary repair and testing. (b) Checking the earth continuity of gysers water heater and accessories. (c) Visual examination of fusible plug.

S&F PVC flexible copper cable sheathed 3 core, 1.5 Sqmm, universal colour code, complete all as specified and directed by Engineer-in-Charge.

S&F heating element of capacity 2KW, Single phase, complete all as specified and directed by Engineer-in-Charge.

S&F thermostate of 25/50 Ltrs capacity, 250 Volts, AC and testing, complete all as specified and directed by Engineer-in-Charge.

S&F PVC connection of size 15mm dia and 450mm long, superior quality for Geyser, complete with brass adopted for Geyser hot/cold, complete all as specified and directed by Engineer-in-Charge.

S&F metal clad plug top 20 Amps, complete all as specified and directed by Engineer-in-Charge.

S&F plug top of 15 Amps, complete all as specified and directed.

S&F syphon assembly complete for 25 Ltrs capacity Geyser as per existing size complete all as specified and directed by Engineer-in-Charge.

S&F indicator lamps to Geyser of any make, type & capacity, complete all as specified and directed by Engineer-in-Charge.

S&F inner tank of Geyser of capacity 25 Ltrs of suitable size, made of steel as per existing gauge, complete all as specified and directed by Engineer-in-Charge.

S&F pressure release valve of geyser (ISI Marked) of 15mm dia with rubber washer, complete all as specified and directed by Engineer-in-Charge.

S&F in repair street light fitting energy saving high efficiency LED street light fitting 45 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length not less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 1.5 sqmm from aluminium conductor on pole to light fittings or as directed by Engr-in-chrage.

Supply, laying, jointing, connecting and testing in replacement PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm, 4 core confirming to IS-7098(Part-I-1988) in PVC conduit 32mm heavy duty alongwith walls or in poles through pipe complete all as specified and as directed. complete all as specified

M&L for ACSR conductor for over head lines on pole stretching without kinks and bends including binding wire and dismantling old UNSV ACSR conductor complete all as specified & directed.

S&F in replacement shackle type porcelain vitreous white, brown or green insulator in replacement having working pressure 1100 Volts of 115mm dia 100mm height including galvanized mild steel strip of size 31x5mm ,size 14mm dia insulator nuts, bolt and washers including dismantling Old UNSV insulator complete all as specified and directed.

Supply, installation, commissioning and testing of bus bar chamber of size 700x400x230mm made up of MS sheet 3.15mm, powder coated with RAL 7032 code (siemens Grey) and aluminium strip of 50x6mm-04 Nos (600mm long) with MCCB 63 Amps, 25 KA, FP alongwith spreaded link for connection complete all as specified and directed by Engg-in-Charge.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 44,963.00 and any other reduction if any from quoted amount.

HARI OM ENTERPRISES (BID ID -3437636)

M/S SATYA SAI CONSTRUCTION (BID ID -3432014)

M/S RUDRA CONSTRUCTION CO (BID ID -3432107)

M/S PREMI CONSTRUCTION CO (BID ID -3432846)

DABGOTRA BUILDERS (BID ID -3432560)

VAISHNAVI BUILDERS (BID ID -3432396)