8267/E8

Amount

Taking down carefully any type of point wiring (light, fan, bell, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets ( excluding light fittings) etc stacking at site for reuse of serviceable items and removal of unserviceable items from site and making good disturbed faces of walls, ceiling, floor etc to match with the existing surface complete all as specified and directed by the Engineer-in-charge.

Material and labour Point wiring with PVC insulated and unsheathed FR grade cable single core multistranded copper conductor 1.5 Sqmm size, 1100 volts grade cable confroming to IS - 694 1990 drawn through and including PVC casing and caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 Sqmm multistranded PVC insulated FR grade and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light / ceiling fan / bell point / 3 pin 5 Amps Socket outlet point on independent board controlled by one switch single pole one way complete all as specified and as directed.

All as per item No. 2.00 here in-before but for one 3 pin 5 amps socket outlet on the same board with other switch for surface / conduit wiring with casing caping / PVC conduit complete all as specified and directed by Engineer in-charge.

All as per item No. 2.00 here-in-before but using 2.5 Sqmm size stranded copper conductor cable, FR grade for one 16 Amp switch socket outlet on independent board complete all as specified and directed by Engineer-in-Charge.

Supply & fix Switch piano, flush type, SP, one way, 5/6 Amps 230 Volts complete all as specified and as directed. Make:- Havells Reo Cat Part No.AHESXXW061 or Make:- Schneider Cat part No.KB31IA or Make:- Cona Cat part No.1061 or Make:- Anchor cat part No.14111.

Supply & fix in repair Switch piano, flush type, SP, one way, 5/6 Amps 230 Volts complete all as specified and as directed. Make:- Havells Reo Cat Part No.AHESXXW061 or Make:- Schneider Cat part No.KB31IA or Make:- Cona Cat part No.1061 or Make:- Anchor cat part No.14111.

Supply & fix Bell/buzzer push 5/6 Amps, flush type, white/ivory finish complete all as specified and as directed. Make:- Havells Reo Cat Part No.AHESBXW061 or Make:- Cona cat part No.1101 or Make:- Schneider cat part No. E8331PRL1_WG or Make:- Anchor Cat Part No. 14113

Supply and fix Switch socket combination multipurpose 2 in 1, 3 pin 6 Amps 240 volt flush type complete all as specified and as directed. Make:- Havells Reo cat part No.AHETOXW202 or Make:- Cona cat Part No.2246 or Make:- Anchor cat part No.38820

Supply and fix in repair Switch socket combination multipurpose 2 in 1, 3 pin 6 Amps 240 volt flush type complete all as specified and as directed. Make:- Havells Reo cat part No.AHETOXW202 or Make:- Cona cat Part No.2246 or Make:- Anchor cat part No.38820

Supply and fix Socket outlet , 2 in 1, 3 pin, 6 Amps, 240 volt flush type complete all as specified and as directed. Make:- Havells Reo Cat part No.AHEKSWW063 or Make:- Cona cat part No.1621 or Make:- Schneider cat part No. E82T25 or Make:- Anchor Cat part No.38364

Supply and fix in repair Socket outlet , 2 in 1, 3 pin, 6 Amps, 240 volt flush type complete all as specified and as directed. Make:- Havells Reo Cat part No.AHEKSWW063 or Make:- Cona cat part No.1621 or Make:- Schneider cat part No. E82T25 or make:- Anchor cat Part No. 38364.

Supply and fix Switch socket combination multipurpose 2 in 1, 3 pin 5 & 15 Amps 240 volt flush type complete all as specified and as directed. Make:- Cona Cat part No. 2251 or equivalent model from make:-Havells / Schneider or Make:- Anchor cat Part No. 14615.

Supply and fix in repair Switch socket combination multipurpose 2 in 1, 3 pin 5 & 15 Amps 240 volt flush type complete all as specified and as directed. Make:- Cona Cat part No. 2251 or equivalent model from make:-Havells / Schneider Make:- Anchor cat Part No. 14615.

Supply and fixing Lamp holder suitable for batten fittings complete all as specified and directed by the Engr-in-Charge. Make:- Cona Cat Part No.2166 or Make:- Havells cat Part no.AHEHBPW000 or Make:- Anchor cat Part No. 39800.

Supply and fixing in repair Lamp holder suitable for batten fittings complete all as specified and directed by the Engr-in-Charge. Make:- Cona Cat Part No.2166 or Make:- Havells cat Part no.AHEHBPW000 Make:- Anchor cat Part No. 39800.

Supply and fix Ceiling rose surface Bakelite three terminals 230 volts complete all as specified and as directed. Make:- Cona Cat Part No.2186 or Havells cat part No.AHEEIXW000 or Make:- Anchor cat Part No. 39050.

Supply and fix in repair Ceiling rose surface Bakelite three terminals 230 volts complete all as specified and as directed. Make:- Cona Cat Part No.2186 or Havells cat part No.AHEEIXW000 Make:- Anchor cat Part No. 39050.

Supply and fix Call bell ding dong AC 230 volts, single pole complete all as specified and as directed. Make:- Cona cat Part No. 3351 or equivalent model of make:- Havells/ Schneider/ Anchor

Supply and fix in repair Call bell ding dong AC 230 volts, single pole complete all as specified and as directed. Make:- Cona cat Part No. 3351 or equivalent model of make:- Havells/ Schneider/ Anchor

Supply & fix Electronics fan regulator, step type, AC 120/280 volt, white/ivory finish complete all as specified and as directed. Make:- Cona Cat part No. 3061 or Make:- Havells Cat part No.AHEDEXW041 or Make:- Anchor cat Part No. 14502.

Supply & fix in repair Electronics fan regulator, step type, AC 120/280 volt, white/ivory finish complete all as specified and as directed. Make:- Cona Cat part No. 3061 or Make:- Havells Cat part No.AHEDEXW041 or Make:- Anchor cat Part No. 14502.

Supply & fix LED tube light fittings suitable for 1x20 watt Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with tube rod including necessary connection including taking down old unserviceable LED tube light fittings complete all as specified and as directed by Engr-in-Charge. Make:- Havells Cat No. LUMLINEPLUSBS20WLED865PCSS or make:- Cromton Cat part No. LDL 20 NW or Philips Cat Part No. BN021 LED 20S PSU CW GR S2 or Make:- Polycab cat Part No.LD00103023.

Supply & fix LED tube light fittings suitable for 1x10 watt Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with tube rod including necessary connection including taking down old unserviceable LED tube light fittings complete all as specified and as directed by Engr-in-Charge. Make:- Phillips Cat Part No. BN021C LED10S PSW CW GR S2 or Havells Cat No. LUMLINEPLUSBS10WLED865PCSS or make:- Cromton Cat part No. LDL 10 NW or make:- BCLSB 10W

Supply and Fix Recessed mounted round type adjustable down light 9 /10 Watt capacity with all accessories and light including necessary connection complete including taking down old unserviceable one complete all as specified and as directed. Make:-Bajaj Cat Part No. BRDCSL 9W WH or Make:- Crompton Cat Part No. CDR-211-09-30-SL-NWH.

Supply and fix Sheet metal enclosure Metal Door for DB's where MCBs to be used 4 way single pole and neutral with 200 amps rated bus bar including taking down old unserviceable DB complete all as specified and as directed. Make:- ABB Cat part No.1SYI011604C0001 or Make:-Havells Cat Part No.DHDNSHODAW04 or Make:- Legrand cat Part No. 507610. Note:- (1) Quoted rates are inclusive of taking down DB including MCBs. (2) Found Unserviceable MCBs will be contractor property and will be measured under Schedule of Credit. (3) Found Serviceable MCBs will be taken into safe custody for reuse under relevent item of this Schedule.

Supply and fix Sheet metal enclosure Metal Door for DB's where MCBs to be used 8 way single pole and neutral with 200 amps rated bus bar including taking down old unserviceable DB complete all as specified and as directed. Make:- ABB Cat Part No.1SYI011608C0001 or Make:-Havells Cat Part No.DHDNSHODAW04 or Make:- Legrand cat Part No. 507611. Note:- (1) Quoted rates are inclusive of taking down DB including MCBs. (2) Found Unserviceable MCBs will be contractor property and will be measured under Schedule of Credit. (3) Found Serviceable MCBs will be taken into safe custody for reuse under relevent item of this Schedule.

Supply and fixing MCB DB Metal Door TPN 4 way including bus bar neutral link, earth bar and din rail, recessed with wall surfaces and making good surfaces of wall including taking down old unserviceable DB all as specified and directed by the Engr-in-Charge. Make:- -ABB Cat Part No 1SYI0216004C0001 or Make:-Havells Cat Part No.DHDNTHODAWO4 or Make:- Legrand cat Part No. 5076 70 . Note:- (1) Quoted rates are inclusive of taking down DB including MCBs. (2) Found Unserviceable MCBs will be contractor property and will be measured under Schedule of Credit. (3) Found Serviceable MCBs will be taken into safe custody for reuse under relevent item of this Schedule.

Supply and fix MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve braking capacity 10 kA as directed by the Engr-in-Charge. Make:-ABB Cat part No. SH201M-C6 to SH201M-C32 or Make:-Havells Cat Part No.DHMGCSPF006-032 or Make:- C&S Cat part No.CSMBS1C6 to CSMBS1C32 or Make:- Legrand cat part No. 488587-95

Supply and fix in repair MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve braking capacity 10 kA as directed by the Engr-in-Charge. Make:-ABB Cat part No. SH201M-C6 to SH201M-C32 or Make:-Havells Cat Part No.DHMGCSPF006-032 or Make:- C&S Cat part No.CSMBS1C6 to CSMBS1C32 or Make:- Legrand cat part No. 488587-95

Supply and fix MCB 63 Amps, DP, 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge. Make:-ABB Cat Part No.SH202M-C63 or Make:-Havells Cat Part No.DHMGCDPF0063 or C&S Cat Part No.CSMBS2C63 or Make:- Legrand cat part No. 408639

Supply and fix in repairs MCB 63 Amps, DP, 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge. Make:-ABB Cat Part No.SH202M-C63 or Make:-Havells Cat Part No.DHMGCDPF0063 or C&S Cat Part No.CSMBS2C63 or Make:- Legrand cat part No. 408639.

Supply and fix Isolator 63 Amps, FP, 240 Volts , rupturing capacity 10 kA as directed by the Engr-in-Charge. Make:-ABB Cat part No.SHD204/63 or Make:-Havells Cat Part No.DHMGIFPX063 or Make:- Legrand cat part No. 408702

Supply and fix in repairs Isolator 63 Amps, FP, 240 Volts , rupturing capacity 10 kA as directed by the Engr-in-Charge. Make:-ABB Cat part No.SHD204/63 or Make:-Havells Cat Part No.DHMGIFPX063 or Make:- Legrand cat part No. 408702

Materials and labour Sub main wiring with 2 runs of single core FR grade PVC insulated unsheathed stranded copper conductor of size 4 Sqmm and one run of FR grade PVC insulated unsheathed multistrand copper conductor of size 4 Sqmm as earth lead drawn in and including PVC non metallic rigid conduit, 20mm dia, ISI marked of suitable size including all fittings and taking out old unserviceable sub main wring including PVC casing caping complete all as specified and as directed. Note:- One run of 4 Sqmm cable and one run of 4 Sqmm cable with one run of PVC conduit shall be measured as one unit.

Materials and labour Sub main wiring with 2 runs of single core FR grade PVC insulated unsheathed stranded copper conductor of size 6 Sqmm and one run of FR grade PVC insulated unsheathed multistrand copper conductor of size 6 Sqmm as earth lead drawn in and including PVC non metallic rigid conduit, 20mm dia, ISI marked of suitable size including all fittings and taking out old unserviceable sub main wring including PVC casing caping complete all as specified and as directed. Note:- One run of 6 Sqmm cable and one run of 6 Sqmm cable with one run of PVC conduit shall be measured as one unit.

Supply and Fix in repairs Plug and socket in sheet metal enclousures with two pin earth plug and socket with MCB SP 20 Amps 240 volts complete all as specified and as directed including taking down old unserviceable one. Make:- L&T Cat part No. DBMPS120SD or Make:- Legrand cat part no. 607841.

Removing unserviceable ceiling fan upto 1400 mm sweep from its original position for inspection removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, and capacitor removing burnt out coils from the slots, cleaning and repairing of slots, including materials like split pin, nut bolts, rubber reel etc reassembling and refixing of fan complete including 'S' hook for fixing of fan and including 1.5 Mtr length connecting rod and fixing back in position after servicing all as specified and as directed. Note:- (i) Spares will be measured and paid separately as "Supply only" under relevant items of this Schedule.

Material and Labour Rewinding of fan motor with super enamelled copper winding wire of suitable size and varnishing including testing of ceiling fan after rewinding complete all as specified and as directed.

Supply only Ball bearing suitable for ceiling fan upto 1400mm sweep.

Supply only Capacitor of 2.5 mfd for ceiling fan upto 1400mm sweep.

Supply only Gun metal bush of suitable for ceiling fan upto 1400mm sweep.

Supply only Shaft suitable for ceiling fan upto 1400mm sweep.

Supply only nuts, bolts, for Ceiling fan

SSupply only PVC connector for Ceiling fan,

Supply only rubber reel insulator for Ceiling fan

Supply only ceiling fan blade.

Material and Labour Painting of ceiling fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc including taking out of ceiling fan and refixing in same position complete all as specified and as directed by Engineer-in-Charge.

Removing unserviceable exhaust fan upto 300 mm sweep from position replacement of unserviceable bush and bearing, open the covers for repairs removing burnt out coils from the slots, cleaning and repairing of slots , and fixing back in position after servicing all as specified and as directed. Note:- (i) Spares such as bearing and bushes etc will be paid separately as Supply only under relevent items here-in-after.

Material and Labour Rewinding of fan motor with super enamelled copper winding wire of suitable size and varnishing including testing of Exhaust fan after rewinding complete all as specified and as directed.

Material and Labour Painting of exhaust fan of any type and sweep with synthetic enamel spray painting including filling cavaties with fillers and cleaning of dust particle complete all as directed by Engineer-in-Charge. complete all as specified and as directed.

Supply only Bush suitable for exhaust fan of suitable sweep.

Supply only Ball bearing suitable for exhaust fan of suitable sweep.

Supply only capacitor 3.15 mfd for exhaust fan of suitable sweep.

Supply and fix Mild steel louvers for exhaust fan upto the size of 400mm sweep upto four storey of building complete including necessary fixing arrangement and cement mortar for making good disturbed surfaces completen all as directed by Engineer-in-charge including taking down old unserviceable louvers.

Taking down carefully storage type water heater (Geyser ) of any make of capacity 25 Ltrs after removing all electrical and water connection from installed position at different locations,dismantling the geyser into parts for inspection.Checking /testing of all parts/accessories like appratus plate,heating element,thermostat switch,neon lamp, water tank,safety valve, spacer ring, rubber gasket,nut-bolts,inspection plate, bottom& top cover etc. complete,de-scaling of water tank and brazing the same to make it leak proof complete inclduing replacement of unserviceable spare parts and re-installation, making electric and water connections and testing all as specified. Note :- Spare parts shall be measured & paid seperately as "Supply only" Items .

Materials and Labour Brazing / gas welding of inner container with copper for 25/ 50 Lrts capacity of geyser tank and make it leak prrof complete all as directed by Engineer-in-Charge.

Materials and Labour Painting of geyser for 25/ 50 Lrts capacity of geyser with one coat of synthetic enamel paint including necessary preparation of surfaces complete all as directed by Engineer-in-Charge.

Supply only Heating element 1.5 KW including rubber washer suitable for existing geyser of capacity 25 Ltrs.

Supply only Heating element 2 KW including rubber washer suitable for existing geyser of capacity 25 Ltrs.

Supply only Chromium plated copper pipe of length not less than 60 Cm suitable for incoming and out going

Supply only Apparatus plate (head assembly) complete all as per existing suitable for 25 Ltrs geysers of any make complete including rubber packing.

Supply only Thermostat switch suitable for geyser of capacity 25 Ltrs.

Supply only Outer casing made out of 22 gauge MS sheet white painted (in two parts) suitable for geyser of capacity 25 Ltr.

Supply only Split plate (top cover ) made out of 22 gauge MS sheet,white painted suitable for geyser of capacity 25 Ltrs.

Supply only Split plate (bottom cover ) made out of 22 gauge MS sheet,white painted suitable for geyser of capacity 25 Ltrs.

Supply only Storage tank copper sheet

Supply only Fusible metal plug.

Supply only Insulating materials (Glass wool) suitable for 25 Ltrs geyser.

Supply only non returning valve for geyser inlet.

Supply only Neon Lamp round or square in shape as per existing.

Supply and Fix 35 Sqmm 3.5 Core, XLPE insulated PVC sheathed armoured LT 1100 Volts grade aluminium conductor cable along the building with clamps includung taking down old unserviceable cable complete all as specified and as directed.

Supply and Fix 25 Sqmm 3.5 Core, XLPE insulated PVC sheathed armoured LT 1100 Volts grade aluminium conductor cable along the building with clamps includung taking down old unserviceable cable complete all as specified and as directed.

Supply and Fix 10 Sqmm 4 Core, XLPE insulated PVC sheathed armoured LT 1100 Volts grade aluminium conductor cable along the building with clamps includung taking down old unserviceable cable complete all as specified and as directed.

Supply and fix inc luding testing and installation of factory made CPRI approved indoor type dust and vermin proof MCB box made out of 2.0mm CRCA sheet of size 0.40m x0.40m x0.10m withn suitable size angle iron including grouted in wall and 100 amps rated aluminium bus bar having opening of one insulator and two nos of SPN and one MCB incluing internal wiring with PVC insulated copper conductor duly numbered withn tagsn for the circuitsn withn hinged ouble doorn shutter ( front and near), cubicle type locking arrangement including two coats of red oxide [primer and one coat of super enamelled paint complete including taking down old unserviceable one , all as specified and as directed. Note:- Contractor shall submit CPRI manufacturer's product and proof of same shall be produced before approval of MCB box.

Supply and fix Power supply unit consisting of starter with 16-25 Amp over load protection, MCB of 25 Amp with socket complete for AC 240 Volt single phase including taking down old unserviceable one complete all as specified and directedby Engr-in-Charge. Make: Havells Cat Part No DHDUCDP0253016-25 or equivalent model of Northwest .

Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip projected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I including taking out of old unserviceable earth pit with all accessories complete all as specified and as directed.

UNIVERSAL TRADING CENTRE

INDIA ELECTRICAL EQUIPMENTS

S KUNDU AND CO

SUDHA ENTERPRISES

M/S J S ENTERPRISES

SANTOSH INTERNATIONAL

B G Trading Co.