Construction of Administrative Building inside Stage II premises

Amount

Boring and concreting of vertical reinforced concrete piles 400mm dia upto the required depth from ground level by Direct Mud Circulation method with bentonite powder slurry, concreting using tremie pipe with concrete grade M25 using 12-20mm machine crushed metal using minimum cement content of 400kg/m³ and maximum water cement ratio of 0.5 with the admixture of conplast SP 337 @300ml per bag of cement as per specification including cost of all materials, labour, lead, lift, etc. complete (but excluding cost of reinforcement)

Setting up of piling/boring equipment with all accessories and tools & plants at each of the pile location based on the sequence of operation approved by the Engineer at site, irrespective of the location and distance of the boring equipment for 600mm dia piles including cost of all materials, labour, lead, lift, etc., complete

Chipping and dismantling of weak concrete from GL to cut off level of pile concrete to meet sound concrete and clearing the dismantled concrete from pile location, etc including cost of all labour charges, tools, lead, lift etc. complete

Earth work excavation for foundation in all soil such as sand or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loam and ordinary soil except hard rock including cost of T&P, machineries, hire charges, lead, lift etc., complete.

Refilling the basement with filling earth well watered and consolidated and as directed by the engineer including cost of filling sand ,all labour,lead,lift,etc.,complete.

Supplying and providing antitermite protection, rate including cost of all materials,labour,lead,lift,etc., complete as per I.S.6313 part II 1971 (rate shall be on the basis of plan area)

Plain cement concrete 1:4:8 using 40mm size graded hard broken granite stone below pile cap, grade beam, etc including cost of all materials, labour, lead, lift, curing, etc complete.

RCC M20 mix using 12 to 20mm graded hard machine broken granite metal with minimum cement content of 370 kg/m³ and maximum water cement ratio of 0.5 including formwork, vibrating, centering, curing, cost of all materials, labour, lead, lift, etc complete all as per specification but excluding cost of steel reinforcement

RCC column in M20 using 12 to 20mm graded hard machine broken granite stone with minimum cement content of 370kg/m³ and maximum water cement ratio of 0.5 including formwork, centering, curing, cost of all materials, labour, lead, lift, etc complete but excluding cost of steel reinforcement

Upto GL

GL to FF

From FF

Brick work in C.M. 1:5 using fly ash brick 230 x 110 x 75mm for basement, superstructure including cost of all materials, labour, lead, lift, curing, etc. complete for superstructure

Upto GL

GL to FF

From FF

Headroom

RCC lintels in M20 using 12 to 20mm graded hard machine broken granite metal with minimum cement content of 370 kg/m³ and maximum water cement ratio of 0.5 including formwork, vibrating, centering, curing, cost of all materials, labour, lead, lift, etc complete all as per specification but excluding cost of steel reinforcement

Upto GL

GL to FF

RCC Beam in M20 using 12 to 20mm graded hard machine broken granite stone with minimum cement content of 315kg/m³ and maximum water cement ratio of 0.5 including formwork, centering, curing, cost of all materials, labour, lead, lift etc complete but excluding cost of reinforcement

GL to FF

From FF

Headroom

RCC Roof in M20 using 12 to 20mm graded hard machine broken granite stone with minimum cement content of 315kg/m³ and maximum water cement ratio of 0.5 including formwork, centering, curing, cost of all materials, labour, lead, lift etc complete but excluding cost of reinforcement

GL to FF

From FF

Headroom

RCC sunshade and loft in M20 using 12 to 20mm graded hard machine broken granite stone with minimum cement content of 315kg/ m³ and maximum water cement ratio of 0.5 including formwork centering, curing, cost of all materials labour, lead, lift, etc complete but excluding cost of reinforcement

GL to FF

From FF to upper floor

Supplying and providing RTS/MS reinforcement including cleaning, cutting, bending, lapping as per drawing, placing in position at all locations and at all levels, including binding with soft annealed 18G black wire, cost of all materials, lead, lift, etc. complete

Flooring with ceramic Anti-skid tiles of approved make, colour, quality and 305X305X6mm thick over CM 1:3, 20mm thick and pointed with the same coloured cement for bath and toilet including cost of all materials, labour, lead, lift, etc complete

Flooring with vertifield tiles of 600x600x8mm thick over CM 1:3, 20mm thick and pointed with the same coloured cement for office floors including cost of all materials, labour, lead, lift, etc complete

Dadooing the walls using ceramic glazed tiles 300X200X6mm thick of approved make, colour and quality for inside walls of bath and toilet over CM 1:3, 12mm thick including cost of all materials, labour, lead, lift, joining with white cement and as directed by the Engineer at site etc. complete

Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) door shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32 x 32mm -2 Nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edgebanding of size 0.45mm on the vertical sides. Hardware made out of ball bearing butterfly hinges -3 Nos. for each shutter and ISI make SS round lock complete for finished item of work,complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames, 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter

UPVC Window Supply and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI /1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not alllow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Plastering with CM 1:5-12mm thick for wall both interior and exterior faces including cost of all materials lead lift etc complete

Plastering with CM 1:3, 10mm thick in ceiling, faces of beams, sunshades, lofts, drops, staircase steps, bottom of waist slab, waste chute, cupboard, etc. in all floors including cost of all materials, labour, lead, lift, curing, etc. complete.

Colour washing two coats with interior Emulsion paint over existing inside wall including cost of all materials, labour, lead, lift, T & P etc. complete and as directed by the Engineer at site.

Providing two Coats of Exterior emulsion paint of good quality over the existing wall surfaces of the building, rate including Cost of all Materials, Labour, Lead, Lift, etc., Complete.

Supplying and fixing 110mm PVC (4kg/ m²) downfall pipes with bends, necessary grating, shoes, clamps, etc. complete including cost of all materials, making holes in masonry or concrete and restoring affected surface to original condition

Providing and fixing Indian type water closet 580mm x 440mm with "P" or "S" trap with all acessories including cost of all materials ,labour,lead ,lift etc., complete.

Supplying and fixing European water closet colour with "P" or "S" Trap with double flapped seat and seat cover with brass hinges and 10 litres capacity PVC low level flushing tank with all internal fittings as approved by the Engineer at site including cost of all materials, labour, lead, lift, etc. complete

Providing and fixing 550x400mm wash hand basin with reputed colour, all fittings including cost of all materials, labour, lead, lift, etc. complete and with the following accessories C.P. Pillar cock 15mm, CI Bracket, CP waste pipe with coupling, PVC connection hose 20mm, CP control cock, CP brass nipple including cost of all materials, labour, lead, lift, etc. Complete.

Supplying & fixing M.S. grills of approved design for windows using 12mm sq. bar and 20x6mm MS flats including cost of all materials and labour charges for cutting, welding and fixing and painting one coat of primer, lead, lift, etc. complete

Supplying & fixing in position of PVC and UPVC pipes heavy duty pipes (10 kg/cm²) Finolex or equivalent with ISI monogram with necessary specials and fittings for water supply including cost of all materials, labour, lead, lift, etc. complete.

32mm dia

25mm dia

Supplying & fixing 12mm dia C.P brass screw down tap (heavy type) as directed by the Engineer at site including cost of all materials, labour, lead, lift etc complete

Supplying & fixing 100mm brass chromium plated showers including cost of CP stop cock, all materials, labour, lead, lift, etc. complete.

Supplying & fixing approved gun metal full way wheel valve (heavy duty) including cost of all materials, labour, lead, lift etc. complete.

Supplying & fixing PVC 110mm dia pipes (6 kg/cm²) for sanitary pipes of approved quality, Finolex or equivalent with ISI monogram including all specials necessary with wooden plugs, etc. as directed by the Engineer at site including making holes in masonry or concrete and restoring the surfaces affected to original condition.

Supplying & fixing PVC 90 mm dia pipes (6 kg/cm²) for waste pipe of approved quality, Finolex or equivalent with ISI monogram including all specials necessary with wooden plugs, etc. as directed by the Engineer at site including making holes in masonry or concrete and restoring the surfaces affected to original condition

Supplying & fixing in floor PVC 63mm dia pipes (6kg/cm²)for waste pipe of approved quality, Finolex or Equivalent with ISI monogram including all specials necessary with wooden plugs, etc. as directed by the Engineer at site including making holes in masonry or concrete and restoring the surfaces affected to original condition.

Supplying and fixing PVC slotted cowl including cost of all materials, labour, lead, lift etc. complete.

110mm PVC Cowl

75mm PVC cowl

Supplying & fixing of PVC Nahini/floor trap 100x75mm with PVC grating over a bed of brick jelly lime concrete 1:2:5 using 40mm size brick jelly and plastering in cement mortar 1:3 including dismantling masonry works wherever found necessary and making good the damaged portion, fixing in floor, cost of all materials, labour, lead, lift, etc. complete.

Painting two coats with ready mixed enamel paint over the new grill work of approved quality including cost of all materials, labour, lead, lift, etc. complete

Supply and fixing of brass chromium plated Towel rod 60cm long and 20 mm dia with Brackets etc., complete

Supplying and fixing Brass chromium plated soap tray of size 150mm x 100mm including the cost of all materials, lead, lift, labour,T&P etc, complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.

Supplying, fabricating and fixing in position powder coated anodised aluminium partly glazed double leaf door using aluminium box section of size 45x45x2 mm for top, middle and sides, 100x45x2mm for bottom, partly panelled with 9mm prelaminated board (Novapan or equivalent) and partly glazed with 5mm thick Opaque glass (saint gobin or equivalent)lock, stainless steel handles on both sides ,hinges at top and bottom, door stopper etc including the cost of all materials, labour, lead, lift, T & P, etc. complete.

Providing and fixing powder coated anodized aluminium partly glazed partition works using 100x45x2 mm aluminium sections as frame and top and bottom panels with 9mm thk prelaminated particle board (Novapan sheet) and middle panel with 5mm opaque glass (Saint gobin or equivalent) panel fixed by using aluminum beadings and rubber lining with standard hardwares including cost of all materials, labour charges, all leads, lifts etc. complete.

Providing plinth protection alround the building for one metre width from the face of basement by laying PCC 1:4:8 using 40mm metal of thickness varying from 150mm to 125mm thick with consolidation of ground below with proper slope and plastered with CM 1:5, 12mm thick including forming garland drains of suitable size to drain water from downfall pipes with slope towards rain water harvesting structure cost of all materials, labour, lead, lift, etc. complete as directed by Engineer at site.

Supplying & fixing of 18W 4 feet LED lamps and fittings complete with copper choke and condenser with TW round blocks on walls and ceiling with PVC unsheathed copper leads from terminal to the fitting including cost of all materials, labour, lead, lift, etc. complete.

Supplying and fixing of 400mm Almonard or equivalent make and standard quality of wall mounted fan including cost of all materials, drilling, of holes and finishing of wall surface after fixing of clamps, labour, lead, lift, etc., complete.

Supply and fixing of Complete set of 300mm (12") sweep Exhaust fan including wiring and extension of supply source including cost of all materials, labour, etc., as directed by the engineer at site.

Supply and fixing of standard quality holder and 36W PL lamp including cost of all materials, lead, lift etc., complete

Supply and fixing of 4 way D.B with 32 Amps DPIC switch with fuse and neutral on suitable TW box with PWD earthing, earth pit, labour, lead, lift etc., complete

Supply and fixing of 16 Amps DPIC switch with fuse and neutral on suitable MS box including cost of all materials etc complete.

Wiring with 2x1.5sqmm PVC insulated Single Core unsheathed copper cable of 1100V in suitable PVC rigid pipe concealed in wall and ceiling for lights with PVC accessories in flush with wall with 3mm thick hylum sheet cover with MS switch box and 5A flush type switch with continuous earth wire connection of 14SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point with 5amps F.t. switch, ceiling rose, cable, pipe, etc complete.

Wiring with 2X1.5sqmm PVC insulated unsheathed copper conductor cable of 1100V in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150X100X13mm with MS switch box with 3mm thick hylum sheet cover for 5A 3 pin non interlocking flush type CS plug with continuous earth wire connection by 14SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point including cost of all materials such as cables, pipe etc complete.

Wiring with 2X4sqmm PVC insulated unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150X100X113mm MS switch box with 3mm thick hylum sheet cover for 15 A 3 pin non interlocking flush type CS plug with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point including cost of all materials such as cables, pipes, etc. complete.

Supply and installation maintenance free GI Earthing System comprising of 50mm dia and 2m long earth electrode of low corbon steel rod with 100 micron bonding and 25kgs of carbon based environment friendly backfill compound and suitable clamp including cost of all materials such as cables, pipe etc complete.

Supply and fixing of 30W LED Outdoor fitting for staircase, terrace & portico including cost of LED bulb, labour for fixing, all leads, lifts etc., complete

Supply and run off 2 of 10 sq.mm PVC aluminium armoured under ground cable with ISI mark of 1100V for effecting service connection including cost of all materials, labour, lead, lift etc complete

Wiring with telephone cable in suitable PVC rigid pipe concealed in wall and ceiling for intercom plug with PVC accessories in flush with wall with 100X150X113mm TW/metal box with sheet cover for intercom female plug including supplying and fixing of intercom female plug, making good of the concealed portion with suitable colour for concealed PVC plug point, cost towards supply of all materials such as cable, PVC pipe, etc. complete.

Supplying and Installing Metal False ceiling using Fire retardant Galvanized Steel Sheet Plain lay in tile size 600mm x 600mm, 0.5mm thick, powder coated on external surface and shall have flange on all four sides to rest on the exposed grids. The system to give 600mm x 600mm centre to centre 'T'. The 'T' shall be not be dipped GI Tee Section 3600mm long main Tee. 24mm wide and cross Tee panels are formed by running main runner of 'T' section of size 30mm x 24mm powder coated at bottom at intervals with powder coating at bottom. Necessary provision of inter locking of 'T' section are made at regular intervals not exceeding 1200mm. The main runners are suspended from the ceiling by means of 4mm dia. GI rods fixed the ceiling using anchor fasteners of 50mm x 8mm size with nylon inset and hooked to the main rubbers using clips. The last hangers at end of each rubber should not be greater than 600mm from the adjacent wall. The last panel shall be placed at the side wall using edge profile 'L'angle of size 20mm x 20mm and fixed to the side wall the false ceiling should be fixed of same level and should present a neat look.

Providing the Air Conditioning facility inside the officials cabin with its accessories including cost of all materials, labour, lead, lift etc., complete

Supplying and providing rain water harvesting percolation well of size 1.35m dia and 6.3m height (upto sandy zone) using precast well Steiner of 50mm thick including earthwork excavation, filling with 40mm metal for 0.3m depth as base course and 0.5m depth inside the well Steiner, precast cover slab 75mm thick, laying PVC pipe 160mm dia (4kg/cm²) from plinth protection garland drain upto this well, cost of all materials, labour, lead, lift etc complete as directed by Engineer.

Supplying and fixing of Lipped mouth porcelain flat back urinal with all accessories such as 32mm dia Bell mouth PVC connection,15mm dia GM wheel valve, 15mm dia 'B'class GI waste water pipe, 15mm dia nylon connection,15mm dia brass nipple etc., including the cost of all materials, lead, lift, labour, T&P etc, complete.

Manufacturing, Supplying and fixing of Stainless Steel Handrails for staircase near wet riser using 50mm dia 304L grade stainless steel pipe of 1.60mm thick will be provided with tubular supports made of 304L grade stainless steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00 mm thick stainless steel circular base plate of 304 grade. The rate shall be included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges including the cost of all materials, lead, lift, labour, T&P etc, complete.

Supplying and erecting in position of following litres capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organization (WHO) Standards with following accessories. (a) MS Skid -1 No. (b) Media 11054 Nos. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set. (c) Feed Pump 0.50 HP - 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase - 1 No. (e) Membrane 40 X 40 Filmtech (or) equulaets / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40X40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20" Filter with Housing -1 No. Low Pressure Switch -1 No.& Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with Necessary Stainless Valves and Fittings and Float Control etc., The rate should be inclusive of all works, wherever necessary to install the System in position and intact.

Supplying, fabricating and fixing in position powder coated anodised aluminium partly glazed door using aluminium box section of size 45x45x2 mm for top, middle and sides, 100x45x2mm for bottom , partly panelled with 9mm prelaminated board (Novapan or equivalent) and partly glazed with 5mm thick Opaque glass (saint gobin or equivalent)lock, stainless steel handles on both sides ,hinges at top and bottom, door stopper etc including the cost of all materials, labour, lead, lift, T &P , etc. complete.

Weathering course with cement concrete 1:1.5:3 to match the gradient for rainwater flow and providing cool tiles using cement mortar 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortar including lifting charges, scaffolding charges if necessary, skirting etc., complete

Providing cup-board shutter using termite/water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as hydraulic hinges, tower bolt, handles, multipurpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work.

Design, Submission of drawing for structural, Elevation, Foundation, Special design for front view, execution drawings and consultation

Structural and Foundation design including submission of execution drawing

Electrical Drawing and arrangement

Finishing the elevation of building

DHARIENEESH HOUSING DEVELOPERS

R JAYABALAN

SRP CONSTRUCTION COMPANY

THOMAS IYADURAI INFRASTRUCTURE PVT LTD

VIJAY GOWTHAM ENGINEERING WORKS

ANITECH INFRAA