SPECIAL REPAIR TO CERTAIN BLDG OF AFNET SECTION AND PROVN OF HEAVY LOAD BEARING CATTLE TRAPS TO CERTAIN GATES OF TECH AREA AT AF STN BKT

Amount

Demolition of cement concrete of any description and in any position and complete removal of demolished material exc. 500 m and upto total distance of 1.5km to outside Defence land complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in floor and finished rough to recive the floor tiles etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specied and directed.

M&L for Pre-polished Machine cut Kota stone slab (Minimum size shallbe 550mm x 550 mm) flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete,laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specied and directed.

M&L for Machine cut Kota stone 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/colour of tiles over and including 10 mm thick rendering in cement mortar 1:4, as in riser of steps,skirting,dado & other vertical surfaces complete all as specied and directed.

Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article complete all as specified and as directed.

M&L for Brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:4) complete all as specified and directed.

M&L for Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specied and directed.

M&L for Brick work with fly ash old size bricks, straight or curved to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed. .

Taking down cement plaster on brick or stone walls surfaces including raking out joints, hacking for key, scrubbing down with water, etc complete all specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar (1:4) surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including one coat of wall care putty 1 mm thick over priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over new surfaces complete all as specified and directed. Note: Putty,Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) Make:- Asian Paint Apex ultima/Berger weather coat long life 10/Nerolac Excel everlast 12

M&L for complete removal of existing treatment on RCC/stone/concrete/brick walls including preparation of old surface by affixing birla care wall putty rubbing to smooth finishing and and applying two coat of 100% premium acrylic emulsion Comouflaging pattern having VOC less than 50gm/Ltr and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @09.ltr /10sqm over new prepare surface and height upto 9 meter complete all as specified and directed. Note : Primer and emulsion to be carried out through airless sprey machine (Mechanical means). Make:- Asian paint apex ultima/Berger weather coat long life 10/Nerolac excel everlast 12.

Supply only Iiquid water proofing compound ISI marked complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar (1:6) finished even and smooth without using extra cement complete and applying two coats of oil emulsion distemper over and including one coats of 1mm thick wall care putty, on new plastered surfaces of walls complete all as specified and directed.Note: Putty,Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) (Make :- Asian Paint Tractor uno/Nerolac Beauty Acrylic/ Berger easy clean).

M&L for preparation of old distempered surfaces of wall by washing rubbing down and stopping of old distempered surface of wall including cornices etc and 1mm thick of wall care putty as required for levelling and applying two coat of oil bound distemper (Oil emulsion any tint) on wall complete all as specified and directed.Note: Putty,Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) (Make :- Asian Paint Tractor uno/Nerolac Beauty Acrylic/ Berger easy clean)

M&L for rendering 10 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar (1:3) rendering is to be finished even and smooth without using extra cement and applying two coat of white wash on new plastered surface of ceiling. complete all as specified and directed.

M&L for Preparing old decorated surfaces by brooming down or steel wire brushing,scrappingdown smoke soot mould, moss and treading oil and greasy spots from plasterd or unplasterd surfaces of ceiling including cornices,pilasters etc and applying one coats of white wash complete all as specified and directed.

M&L for providing PCC (1:2:4) type B1 using 12.5mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of 100 mm thickness complete all as specified and directed.

M&L for 100mm thick cement concrete Nominbal mix M-25 using 20 mm crushed stone aggregate as in pavings/hard-standing finished the concrete surface even and fair without using extra cement including necessary formwork complete all as specified and directed.

S&F steel works in tubular truss, purlins, post etc including special shaped washers complete using ERW or induction butt welded tubes conforming to I.S. 1161 -1979 grade St-240 including one shop coat of Zinc Chromate Primer paint at contractors workshop before fabrication complete all as specified and directed.

S&F MS sheet as In base plate, gusset plate etc welded or riveted to steel staircases including holding down bolts, nuts, rivets etc confirming to Fe 410-W(Gde -E-250)quality -A complete all as specified and directed.

S&F Rolled mid steel in rafters,purlins,crane grantries,rails and fasternings and heavy bracket framing (Beam,tee,angle,channel or flat section) includuing distance pieces,cleats etc (Fe-410-Grade (E-250) quality-A) complete all as specified and directed.

S & F 0.50mm thick (AZ-150) Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F 0.50mm thick Pre-painted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550Mpa as in ridge ,valley gutter etc and fixed with self tapping screws and flat iron complete all as specified and directed.

M&L for Plates (Plain or chequered) channels in duct cover, square cut or notched (ordinary and counter sunk) forming holes for steel bar handle, without any attachment complete of Gde Fe 410-W(Gde-E-250) Quality -B complete all as specified and directed.

M&L for two coat of synthetic enamel pinting over a coat of pink primer including preparation of steelnew surface over 10 cm width or girth complete all as specified and directed. (Make :- Asian Apcolite Premium Gloss Enamel/Nerolac Synthetic High glass Enamel /Berger HI-Glass luxol)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for mild steel framed work such as grills, gratings etc with ends of bars, M S pipe shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and directed.

M&L for Mild steel Framed work as in door or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Gde Fe 410-W(Gde-E-250) Quality -B complete all as specified and directed.

S&F plain steel sheet of 1.25 mm thickness in wall cladding,steel gates and similar work,cut to size,holes punched:including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams,including bending or turning up,mitred angles,etc. as required complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of zink chrome primer including necessary rubbing with sand paper or grinded by hand grinder to achieve smooth and even surface complete all as specified and directed.(Make :- Asian Apcolite Premium Gloss Enamel/Nerolac Synthetic High glass Enamel /Berger HI-Glass luxol)

M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description having width/girth exceeding 10 cm complete all as specifie including preparation and rubbing with sand paper to make surface even and smooth complete all as specified and as directed.(Make :- Asian Apcolite Premium Gloss Enamel/Nerolac Synthetic High glass Enamel /Berger HI-Glass luxol)

M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as specified and directed.

Taking down chowkats or frames area exceeding 1.50 Sqm and not exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate complete all as specified and as directed. (Note - The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).

S&F factory made UPVC door frame white colour extruded with wall thickness of 2.3mm (+ -0.2mm). Corrner of door frame jointed with galvanised brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frame reinforcement by galvanised MS tube of size 19mmx19mm and 1mm (+- 0.10mm) wall thickness and 3 Nos stainless steel hines by the manufacture complete all as specified and directed. (Make :- Rajshree Plastiwood/Kaka Industries/century plywood).

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

S&F for rubber moulded machine pressed precast concrete interlocking paver block with pigment, any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade complete all as specified and directed.

Fixing only rubber moulded machine pressed precast concrete interlocking paver block with pigment any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade except pavor block complete all as specified and as directed.

S&F at ground level,factory made pre cast kerb stone of M-25 grade cement concrete in position to the required line,level and curvature,jointed with cement mortar (1:3) includiing making joints with or without grooves complete all as specified and directed.

M&L for preparation of new plastered/concrete surface and applying two coats of cement base paint over a coat of primer all as specified and directed.

M & L for sand filling(Moorum Banda) in floors, 30 mm thick, spread levelled and rammed including watering and consolidating complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and as in benching and similar work including necessary form work complete all as specified and directed.

Excavating over area not exceeding 1.5 meters deep and getting out in hard / dense complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cms thick in hard / dense soil complete all as specified and directed.

M&L for removing excavated material not exc. 50 m and depositing in soft/hard soil, where directed. complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in walls any thickness, size or shape and pilasters and pillars with and including necessary formwork etc. complete all as specified & directed.

M&L for 50 mm thick lime concrete with lime mortar (1:2) mix with and 40 mm graded stone aggregate in sub floors complete all as specified and directed.

S&F 50 mm bore tubes heavy grade galvanized 4.5 mm thick plain end & wight not less than 6.1 Kg per RM and fixed or laid in floors in cattle trap complete all as specified and directed.

M&L for mild steel bands or straps have screwed for support of GI pipe of cattle trap confirming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for mild steel framed work as in cattle trap of angle or other section confirming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for holes drilled upto 12 mm dia and depth of hole 3mm and not exc 12 mm ect. complete all as specified and directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and not exc. 10 cm long long & diameter of shank 12 mm etc. complete all as specified and directed.

M&L for cast iron 100 mm dia rain water pipe in any length laid in trenches complete all as specified and directed.

Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittings etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed. Note- (i) Dismantled serviceable light fitting shoud be kept in safe custody for reuse. (ii) Refixing of serviceable fitting shall be paid seperately under relevant items-

Taking down fans/meter/Geyser/Exhaust fan from existing position and removing the same and deposited to MES store and will installed after completion of work.

Taking down old and unserviceable sub main wiring of any size/type /core including earth wire complete with batten conduit etc complete all as specified and directed.

Taking down old and unservicable sheet metal enclousure ,switch fuse unit,distribution board any type/way/capacity including fuses mcbs ,insulator rccbs etc copmlete after removing all connection and making good the disturbed surface complete all as specified and directed.

M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in concelled conduit and including making good the disturbed surface of wall with colour washing /distempering the surface to match the existing one drawn into and including non metallic rigid PVC conduit medium grade 2 mm thick medium 20/25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of 1 to 8 module metal flush boxes and including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete all as specified and directed. Make-Polycab/Finolex/RR kabels/Plaza. Note:- surface Conduit shall be laid in celing portion only. Make: Plaza/havells/polycab/Finolex One light/fan point controlled by one switch SP 5 Amps ,240 V

Ditto all as per item No 62 above but for one 3 pin 5 amps switch socket outlet point on independent board

Ditto all as per item No 62 above but for one 3 pin 5 amps socket point on same board

Ditto all as per item No 62 above but for all as per the item no 5 herein before but with 2.5 sqmm copper conductor for 5 pin 15 Amps switch socket outlet.

S&F switch modular type 1 module single pole, one way 5 Amps. Make - Goldmedal/crabtree(havells)/Panasonic or equivalent

S&F switch modular type 1 module single pole, one way 15 Amps. Complete all as specified and directed. Make - Goldmedal/crabtree(havells)/Panasonic or equivalent

S&F socket outlet 2 in 1, 5 pin, 15 Amps modular type 2 module complete all as specified and directed. Make - Goldmedal/crabtree(havells)/Panasonic or equivalent

S&F socket outlet 5 Amps modular type 2 module complete all as specified and directed. Make - Goldmedal/crabtree(havells)/Panasonic or equivalent

M&L ceiling rose,PVC/polycarbonate, isolated body complete all as specified and directed.

M&L for submain wiring with two run of single core PVC FRLS-H insulated unsheathed multi stranded copper conductor cable of size 4 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multi standed copper conductor cable of size 4 Sqmm 1100 volts grade as earth continuity conductor drawn through into and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc including taking out old unserviceable burnt/damaged sub main wiring from its existing position complete Complete all as specified and directed. (Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the quoted unit rate). Make- Polycab/Havells/RR kables/plaza. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

S&F sheet metal enclosure for DB’s when MCB to be used single pole and neutral double door, 8 way, AC,240 volt with 200 amp bus bar rating Complete all as specified and directed. Make :- Legrand / Seimens / Havells /L&T/ C&S.

S&F MCB SPN 32 to 40 Amps 240 volt,50 hz,10 KA breaking capacity :C" curved type complete all as specified and directed. Make :- Legrand / Seimens / Havells /C&T/ C&S.

S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed. Make :- Legrand / Seimens / Havells/C&T/ C&S.

S&F socket outlet 5 pin 20 amp modular type 2 module with suitable size of module metal flux boxes and including modular front cover plate and back plate for mounting modular type switch & socket with one single pole one module MCB of 20 amp including electrical connection all as specified and directed by Engineer-in-Charge. Make :- Legrand / Seimens / Havells/ L&T/ C&S.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 16 mm suspension wire, one twin core cable flat complete all as specified and directed. Make- Polycab/Havells/RR kables/plaza.

S&F square recessed / surface/suspended mounting LED ceiling light with extruded aluminium housing and milky diffuser of 36 W 2'X 2' panel complete with LED driver 240 V ,50 Hz,3600 lumen 6500 K complete all as specified and dircected. Make -Havells/Bajaj/Phillips /L&T/ Usha.

S&F LED security light 60 watt complete with security light bracket (complete with two set of clamp ,nut and bolt) made out of 40 mm medium grade GI pipe bend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtrs) and making conection with using 1.5 sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed. Make -Havells/Bajaj/Phillips/L&T/ Usha.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter volt 230 V 50 Hz RPM 1200 copper winding of sweep 250 mm. complete all as specified and dircected. Make :- Havells/Philips/Crompton/Bajaj

Supply installation and testing of wall mounted Air circulator 400 mm sweep with high speed and aerodynamically designed Acrylonitrile Butadiene aluminium blades / body, jerk free and smooth oscillation and inbuilt regulator system chord complete all as specified and directed by EIC. Make :- Havells / Bajaj / Usha/ Philips/ L&T.

M&L for flame proof point wiring with two single core FRLS-H PVC insulated & PVC unsheathed multi stranded copper conductor cable of size 1.5 Sqmm 1100 volts grade in and including stove enamelled steel conduit of size 20 to 25 mm with all accessories and one single core PVC insulated & PVC sheathed multistranded FRLS-H copper cable of size 1.5 Sqmm 1100 Volts grade as earth continuity conductor connected to common earth dolly, switch board complete incuding cutting chesses on wall/ floour/ ceiling etc. & making good the disturbed surface with cement morter (1:4) complete all as specified for one light / fan point controlled by one 5 Amps flameproof switch one way complete

M&L for switch flame proof rotory type with termination box in LM 6, 16 A,single phase 250 volts,complete all as specified and directed.

S&F LED Light Fitting 2x20 Watt flame proof ,CMRI certified recommended for gas/vapour group of IIA &III B ,zone 1 and 2 and IP 65 Protection with die cast alluminium housing with heat resistant toughned glass with LED tube light, fixtures, driver holders ,connectors etc complete with all accesories prewired and including connecting with three core flexible copper conductor cable complete all as specified and directed.

S&F flame proof metallic body exhaust fan single phase 230 Volt 50 Hz 300 mm 1440 RPM with louvers and shutter including civil work i.e making of holes etc with all fixing accessories complete all as specified and directed. Make :- Shyam / Havells/Bajaj/Usha/L&T.

PANKAJ AND BROTHERS (BID ID -3486356)

GIAN ENGINEERS (BID ID -3492403)

Yaduvanshi Traders (BID ID -3491935)

M/S GUPTA TRADERS (BID ID -3491983)

M/s JS Constructions (BID ID -3492419)