Quatation for preparing estimate of Maharashtra Institute of Labour Studies For Classroom,PHD room and Library area and hostel furniture.

APO Unwind with Quarter Desk let Providing, supplying and placing of chair with desklet.The Seat and Back should be made up of injection moulded indoor grade Polypropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. The Armrest should be made of indoor grade PolyPropylene compound and assembled over the tubular frame. The "L" shaped desklet should be made of 1.8+-0.05cm thick prelaminated particle board with 0.2+-0.05cm thick injection moulded poly proplylene all around. Desklet should have back and front adjustment of 4.4+-0.5cm. The paper tray should be made of 0.4mm thick MS rod which is spot welded to form a mesh like structure. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-57.5 cm and Depth-67.8 cm. This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD, GRIHA & SVAGRIHA & GREEN PRO.

APO Meeting Table in membrane finish Size: 4200mm W x 1500mm D x 740mm H Supplying and placing in position conference table of the following specifications with overall size shall be 4200 X 1500 X 740.Work top--Made of 25mm thick MDF-one side pre-laminate board conforming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Access panels provided with soft closing hinges. Under structure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lapping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Management-Bottom cabinet with door is provided for flow of wires and cables. Cut-out provision below Access flap at four locations for standard 8 module Anchor Roma is provided. Beside each cut-out, an additional cut-out with plate is provided for mounting Audio Visual Cables (eg. HDMI,VGA A,etc)

APO Thrill Leatherette-High Back Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers anmoulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair.The chair seat & back size are HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H) SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features : Up-Down adjustment–7 steps (7.0 ± 0.5cm range) · It has to & fro movement along with Swivel adjustment. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 77.0 CM. DEPTH (D): 77.0 CM. HEIGHT (H): 110.5-120.5 CM. SEAT HEIGHT (SH): 44.5-54.5 CM. This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD, BIFMA Level 2 & GREEN PRO.

APO Thrill Leatherette-Mid Back Providing, supplying and placing of Mid Back Chair. SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H) SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features : · Up-Down adjustment–7 steps (7.0 ± 0.5cm range) · It has to & fro movement along with Swivel adjustment. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). 7. TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 77.0 CM. DEPTH (D): 77.0 CM. HEIGHT (H): 98.0-108.0 CM. SEAT HEIGHT (SH): 44.5-54.5 CM. This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD, BIFMA Level 2

APO Thrill Leatherette-visitor Providing, supplying and placing of visitor chair THRILL CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm. thick hot pressed plywoodn with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort to popliteal area.The foam backing done in back ( Executive chairs only) for extra fluffiness and comfort in chair.SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf as per IS:7888 at 25% compression. M.S. VISITOR TUBULAR FRAME (For Thrill Visitore chair): The powder coated (DFT 40-60 micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube. ARMRESTS:The armrest top is moulded from polyurethane(PU) with metal insert and mounted on to a tubular frame.WIDTH (W): 60.5 CM.DEPTH (D): 65.0 CM. HEIGHT (H): 86.5 CM. SEAT HEIGHT (SH): 46.0 CM.

APO Luft 3 seater 4 arms Providing, supplying and placing of public seating. SEAT SHELL : The Seat is made from high density self-skin Polyurethane foam reinforced with 1.2 mm M.S. perforated sheet insert. The Polyurethane foam having density of min. 350 kg/m3 with a Shore 'A' hardness of 60±10. SEAT SIZE : 52.0 cm (W) x 50.5 cm (D) BACK SHELL : The Back is made from high density self-skin Polyurethane foam reinforced with 1.2 mm M.S. perforated sheet insert.The Polyurethane Foam having density of min. 350 kg/m3 with a Shore 'A' hardness of 60±10. BACK SIZE : 52.0 cm (W) x 53.5 cm (H) CROSS BEAM : Cross Beam made up of Diamond shaped double wall Extrusion of Aluminum 6063 T6 Alloy with coated of 50 micron epoxy polyester coating and fitted with Polypropylene Copolymer engineering plastic end caps. CROSS BEAM SIZE : 11.3 cm (W) x 9.4 cm (H) X 0.4 cm (Thickness). LEG : Legs are made up of High pressure Aluminum ADC12 Die cast coated with 50 micron epoxy polyester coating, Leg Are fitted with soft grip PVC level adjusting shoes. ARMREST : Armrest are made up of High pressure Aluminum ADC12 die cast coated with 50 micron epoxy polyester coating. SEAT SUPPORT BRACKET Assembly : Seat support bracket assembly made up of argon shield welding of Hot Rolled Steel (IS: 2062) 0.3cm Thickness. This welded structure is coated with 50 micron epoxy polyester coating. CLAMPING BRACKET : Clamping bracket are made up of Hot Rolled Steel (IS: 2062) 0.3cm Thickness coated with 50 micron epoxy polyester coating.Overall Dimensions of Chair Seat Height - 42.5 cm.Height - 87.0 cm. Width-165.5cm and Depth-66.5 cm,

APO Wish cubicle 6ft x 6ft Main table Size: 1500mm W x 750mm D ERU: 900mm W x 450mm D Providing, supplying and placing of WISH workstation as per specificationsn panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magneitc/fabric/fabric tackable/white board/glass writing board/ clear glass tile/plainmetal prelam tile.Bottom tiles - Plain metal/ fabric magnetic/ fabric/laminated/prelam. SPLIT Tiles: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic/fabric tackable/white board/prelam/ plain metal along with split fabric magnetic/fabric tackable/white board/prelam/ plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in fabric/DL + Fabric/DL finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in clear glass/fabric tackble /laminate/white board finsh. Side panels or legs - out of 25 mm thk prelam particle board with flat pvc lipping edge banding considered only on the open end conditions or metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding

APO Thrill Mesh Plus Full Back with head rest Providing, supplying and placing of High Back Mesh chair with headrest as per specifications SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size are *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. · 3 position locking with anti shock mechanism.· Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 9.5 ± 0.3cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM.HEIGHT (H): 101.5 - 111.0 CM.

APO Relax Sledge base with arm 1. SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholestry in product catalog). * SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D) * BACK SIZE : 53.0 cm. (W) x 39.0cm. (H) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. 4. M.S. POWDER COATED FRAMES FOR SLED BASE CHAIRS :The powder coated( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ±0.016 cm and Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube. 5. ARMREST : The Armrest are made of glass filled Polypropylene compound and assembled over the tubular frame.WIDTH (W): 63.0 CM.DEPTH (D): 58.5 CM. HEIGHT (H): 86.5 CM.SEAT HEIGHT (SH): 46.0 CM

APO WIsh table without pedestal and fabric screen Size: 1200mm W x 600mm D Fabric screen in between two person WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magneitc/fabric/fabric tackable/white board/glass writing board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic/fabric/laminated/prelam. SPLIT Tiles: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic/fabric tackable/white board/prelam/ plain metal along with split fabric magnetic/fabric tackable/white board/prelam/ plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in fabric/DL + Fabric/DL finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in clear glass/fabric tackble /laminate/white board finsh. Side panels or legs - out of 25 mm thk prelam particle board with flat pvc lipping edge banding considered only on the open end conditions or metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle boardwith flat pvc lipping edge banding

Size: 900mm W x 600mm D WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magneitc/fabric/fabric tackable/white board/glass writing board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic/fabric/laminated/prelam. SPLIT Tiles: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic/fabric tackable/white board/prelam/ plain metal along with split fabric magnetic/fabric tackable/white board/prelam/ plain metal. INTERMEDIATE BLOCKS Intermediate blocks are given in fabric/DL + Fabric/DL finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in clear glass/fabric tackble /laminate/white board finsh. Side panels or legs - out of 25 mm thk prelam particle board with flat pvc lipping edge banding considered only on the open end conditions or metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding

GLASS DOOR STORWEL Size: 916mm W x 486mm D x 1981mm H Glass Door Storwel916mm (W)x486mm(D)x1980mm(H) with welded construction. It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt . It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.

APO Fold table Size: 1500mm W x 750mm D x 750mm H Worktop: Made of 25mm Thick Pre-laminated twin board interior grade of approved shade conforming to IS:12823, and Edge banded with matching 2 mm thick PVC lipping. Modesty Panel: Made of 25mm Thick Pre-laminated twin board interior grade of approved shade conforming to IS:12823 and Edge banded with matching 2 mm thick PVC lipping. Under-structure: Legs are made of 50mm x 30mm x 1.6mm thk M.S. electric resistance welding tube as per IS:7138 and 10 mm thick HR steel as per IS 2062 welded together and powder coated with min 45 micron thickness of epoxy polyester coating. Modesty holding Leg frame is made of made of 50mm x 30mm x 1.6mm thk M.S. electric resistance welding tube as per IS:7138 and 3mm thick HR steel as per IS 2062 welded together and powder coated with min 45 micron thickness of epoxy polyester coating.Cross member assembly for top is made of made of 50mm x 30mm x 1.6mm thk electric resistance welding tube as per IS:7138 and 3 mm thick HR steel as per IS 2062 welded together and are powder coated withmin 45 micron thickness of epoxy polyester coating Pull handle made of Ø16.0 x 1.2mm thk M.S. electric resistance welding tube as per IS:7138, powder coatedwith min 45 micron thickness of epoxy polyester coating. Housing bracket assembly is made of 3 mm thick HR steel as per IS 2062 welded together and is powder coated with min 45 micron thickness of epoxy polyester coating.Housing bracket carries mechanism for folding table made of 10mm thick HR steel as per IS 2062.Understructure is provided with Ø 65mm lockable Castors for ease of movement and can be locked when required at any position.

APO Relax 4 legs with arm & castor SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholstery in product catalo). * SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D) * BACK SIZE : 53.0 cm. (W) x 39.0cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS :The powder coated ( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm and Ø1.6±0.3mm x 0.16 ± 0.0128cm M.S. E.R.W tube. The Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. ARMREST : The Armrest are made of glass filled Polypropylene compound and assembled over the tubular frame. SIZE: 40.5cm. (W) X 29.8cm. (D) X 18.0 cm (H). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Poly Amide. With Desk With Wheel WIDTH (W): 63.0 CM. DEPTH (D): 60.0 CM. HEIGHT (H): 86.5 CM.SEAT HEIGHT (SH): 46.0 CM

Reserve plus glass door storage Size: 1200 mm W x 450mm D x 1190mm H Providing, supplying and placing of storage Width "W" -1200mm Height "H" With Wood Top - 1215mm Depth - 470mm Note: 1. 750H storage unit only comes with wood top. 2. Height including leveler Height with zero position 3. Top panels and end cover panels are to be booked separately CONSTRUCTION AND MATERIAL 1)Aesthetically appealing completely knock down construction. 2)Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mmCRCA), Back panel(0.5mm for 750mm and 900width Storage Units and 1.2mmCRCA for 600mm and 1200width Storage Units to avoid toppling of unit in caseof Glass door unit and single door unit), Top Bottom stiffener(1.2mm CRCA) andEnd Cover(0.6mm CRCA). CRCA 'D' Grade as per IS-513 3)All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness. TOP OPTIONS For top panel two options available 1)Wood Top Panel (Made of 25mm thick pre-laminate board (PLB) conformingto IS-14587:1998, Edge banded with matching 2 mm thick PVC lipping ) SHELVING 1)Fixed shelves made up of 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513)

APO Cantina Table with SS Top and SS Stools - 4 - Seater Cantina Table with SS Top and SS Stools size shall be 1180 Width mm x 1580 Depth mm x 750 Height mm . Top shall be of Stainless Steel brushed with PLB insert for Durability . Easy to maintain hygiene . The Understructure shall be made of 50.8 mm x 50.8 mm 1.2 mm thick powder coated ERW tubes at base which are welded and fixed to the Top with screws . Tubular stiffeners that are provided between the two vertical frames . The tubes shall be closed with plastic caps . Level adjustment shall be provided to take care of unevenness in floor . There shall be Stainless Steel stools

APO Bunk Bed with sheet metal without mattress Colour: Black WIDTH (W)2056.0 MM. DEPTH (D)915.0 MM. OVERALL HEIGHT (H):1600.0 MM BED STEAD HEIGHT (H1):4000 MM TIER HEIGHT (H2)850.0 MM BED FRAME BED FRAME ASSEMBLY IS A WELDED OF SIDE FRAME, INNER SLAT & CLADDING, HE SIDE FRAME ARE MADE ASSEMBLY OF RECT. TUBE 50.8 x 25.4 X 1.2mm, ASSEMBLY INNER SLATS OF SQ. TUBE 19x1.0 MM MS ERW TUBE IS: 7138. HEAD BOARD & TAIL BOARD HEAD BOARD & TAIL BOARD ARE MADE UP OF SQ. PIPE 38.1 X 1.6mm & 50. 25.4 X 1.0mm THK MS ERW TUBE IS: 7138 And SUPPORT BRACKET 3.2MM THK MS SHEET IS: 513 HEAD/TAIL BOARD CONNECTED WITH BED FRAME ASSEMBLY WITH MB NUT & BOLT. GROUTING COIN FLANGE 3.2MM THK MS SHEET PROVIDED AT THE BOTTOM OF VERTICAL PIPE FOR FIXING IN TO GROUND WITH SUITABLE CROUTING BOLT. LADDER ASLY LADDER ASSY IS MADE UP OF SO. 25.4 x 1.2 mm THK & SQ. 19 X 1.2mm THK MS ERW TUBE IS:7138. SIDE SUPPORT SIDE SUPPORT IS MADE OF #25.4 x 1.2mm THK & 19 X 1.2mm THK TUBE. CLADDING 1.2mm THK CRCA. FINISH EPOXY POLYESTER POWDER COATED COLOUR(AS PER WORKS ORDER)-DFT 40-60 MICRON

APO EQ Study table Size: 890mm W x 450mm D x 750mm H Overall Size: Width - 900.0 mm Depth - 450.0 mm Height - 750.0 mm Material: Top panelise made of 18 mm thick Prelaminated Particle Board All the exposed edges are edge banded with 2 mm thick PVC edge banding. Structure consist of metal frames made of M.S. 25 mm Square Pipes in 0.9 mm Thickness. Drawer assembly consists of drawer front made of 0.6mm CRCA sheet, drawer tray of 0.8mm CRCA sheet. Hardware :The high quality hardware used .Construction:Knock Down construction.Packets:3 packets. Finish:18 mm thick Prelaminated Particle Board is in 4501, make Side frame structure and Back frame structure are powder coated in shade : MATT TAUPE WHITE. REF NO. 9001904 to thickness of 50 microns (+-10).Rest

APO Personal lockers 2 door with cam lockSize: 1125mm W x 470mm D x 1950mm HProduct Size - 1125(W) x 470(D) x 1950*(H) *Height including leveler * Height of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction.The add-on units are stack widthwise to form a row of Lockers. (Note- Single Main unit should not be offered. Minimum 1Main + 1Addon to be offered, Maximum 1Main + 4Addon to be offered) Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 - CRCA 'D' Grade as per IS-513 Doors (Without envelope slot) - Made from 0.6mm Thick CRCA (D Grade, IS513) Soft closing hinge. Door size - For 2 Door locker - 373(W) X 18(T) X 948(H) Cam Lock - Oval knob that functions as a handle - Click action mechanism - Key removal in locked and unlocked position - Zinc alloy die cast housing Shelving - 3 Shelves for 2 Door locker without envelope slot Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Accessories (Hanging Rail) - Hanging Rail option available only in 2 Door Locker. It comprises of 2 injection moulded holders mounted on the shelf and a hanging rod. Hanging rod is made of Aluminium and is silver anodized.

Please Enable Macros to View BoQ information