Special Repairs to toilet in TNCSC Regional office building at Palavansathukuppam in Vellore District.

Dismantling Plain cement concrete and clearing away as directed by the departmental officers.

Dismantling Floor finish and Dadooing walls with mosaic tiles/ glazed tiles/cuddpah slab in Cement mortar and clearing away as directed by the departmental officers.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including mixing by mechanical means curing etc., complete complying with standard specifications and as directed.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (UPVC) sections. Profiles: The Profiles should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25x24x25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60x102mm. The mullion should be of 60x74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation. The profiles should be cut to length and welded 45 degres. The window should be designed such that the water drainage does not passs through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding sylon plug and driving ms electroplated screws into plug.

Paving the flooring with design colour Ceramic tiles of size 305x305x6mm of approved quality and colour over a base layer of C.M.1:3, 20mm thick in all floors used 0.20 kg / m2 including finishing the joints and pointing flush with even surfaces etc., complete complying with standard specifications and as directed.. (The tiles should be got approved by the Executive engineer before use on works).

Dadooing the walls with glazed tiles of size 300mmx200mmx6mm of approved quality and colour over a base layer of C.M.1:2, 10mm and pointing the joints with white cement mixed with colouring pigment at the rate of 0.40 kg/sq.m neatly in all floors, curing etc., complete complying with standard specification and as directed by the departmental officers. (The tiles should be got approved by the Executive engineer before use on works).

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm laid in cement mortar 1:2 (one of cement and two of sand)mixing with water proofing compound confirming to ISS at 2% weight of cement used and pointed with water proofing compound mixed with red oxide etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing marble stone of size 0.61m x 1.22 m of 20 mm thick in all floors for urinal partition including labour charges for fixing and polishing etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing in position of best Indian make white / colour glazed eartherware lipped mouth flat back urinal of best quality and approved make of size 430mmx260mmx350mm with GI Pipe, 32mm dia bell mouth PVC Connection and waste pipe, 15mm dia GI Pipe of required length, 15mm dia GM Wheel valve, 15mm dia brass nipple 2 Nos and fixing the urinals in position with necessary TW plugs, Clamps, Screws etc., including dismantling masonry and redoing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc., complete complying with standard specifications and as directed by the departmental officers.(The Urinal should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position European Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm dia brass chromium plated piller tap, 32 mm dia C.P. waste coupling, 32 mm dia P.V.C. waste pipe with rubber plug and chain, 15mm diameter G.M. wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc., complete complying with standard specifications (the wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make confirming to IS specifications and quality including cost of shellac, thread, etc., complete as directed by the departmental officers.

Supplying and fixing in position of best Indian make PVC Water Tank of 1000 litres capacity confirming to ISI standards as directed by the departmental officers including cost of material and conveyance charges of material to work site etc., complete complying with standard specifications.

Supplying and fixing of 110mm dia PVC rain water down fall pipes of including cost of PVC specials fixing them in position with necessary shoes, bends, clamps, TW plugs, screws, nails etc., complete. As per standard specifications

Supplying and fixing in position best quality PVC soil / waste pipes of 75mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers.

Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers.

Supplying and fixing in position 75mm dia PVC Elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of Pipes, jointing the Specials etc complete.

Supplying and fixing in position 75mm dia PVC Door Elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of Pipes, jointing the Specials etc complete.

Supplying and fixing in position 75mm dia PVC Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete.

Supplying and fixing in position 110mm dia PVC Elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of Pipes, jointing the Specials etc complete.

Supplying and fixing in position 110mm dia PVC Door Elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of Pipes, jointing the Specials etc complete.

Supplying and fixing in position 110 mm dia PVC Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete.

Supplying, and fixing UPVC pipes of 32mm dia of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the UPVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The UPVC pipe should be got approved by the departmental officers before use on work.

Supplying, and fixing UPVC pipes of 25mm dia of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the UPVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The UPVC pipe should be got approved by the departmental officers before use on work.

Supplying, and fixing UPVC pipes of 20mm dia of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the UPVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The UPVC pipe should be got approved by the departmental officers before use on work.

Supplying and fixing in position 32mm dia UPVC Elbow of approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete.

Supplying and fixing in position 25mm dia UPVC Elbow of approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete.

Supplying and fixing in position 20mm dia UPVC Elbow of approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete.

Supplying and fixing in position 32mm dia UPVC Tee of approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete.

Supplying and fixing in position 25mm dia UPVC Tee of approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete.

Supplying and fixing in position 20mm dia UPVC Tee of approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete.

Supplying and fixing in position 32mm dia UPVC Union of approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete.

Supplying and fixing in position 25mm dia UPVC Union of approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete.

Supplying and fixing in position 20mm dia UPVC Union of approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including mortar plasticizer at 200ml per 50kg of cement used, including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed by the departmental officers.

Renewing the broken Air inlet window glass panes of 4mm thick with new glasspanes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Dismantling A.C Sheet roofing without roof timber and clearing away and carefully` stacking materials useful for re-use as directed by the departmental officers.

Supplying and laying of High profile colour galvalume sheet (as per ISI Standard) with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick not less than 150 GSM and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m and long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

BRICK WORK in cement mortor 1:6 (one cement, six sand) using best quality Country bricks of size 8" 3/4"x4 ¼ x 2 ¾ “ for walls including cost of scaffolding curing, finishing etc., complete complying with standard specification and as directed by the departmental officers.

Please Enable Macros to View BoQ information