REPAIR/ MAINT OF INTERNAL WIRING, CEILING /EXHAUST FAN, GEYSER AND ALLIED WORKS IN SIRSA ARMY CAMP AT MIL STN KATIHAR

Amount

Material and labour for point wiring for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper multistranded conductor cable 1100 volts grade controlled by one way switch including 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper multistrand conductor cable 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping with all accessories and sunk cast pressed steel terminal box made out of MS sheet 1.25mm thick with 3mm thick hylum laminated/bakalite sheet cover for mounting switch, socket, fan regulator,etc after complete all as specified and as directed by the Engr-in-Charge. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No 1 here-in-before but for 3 pin 6 Amps socket out let on the same board with 1.5 sqmm cable complete as specified and directed.

All as per item No 1 here-in-before but for 5 pin 6 Amps switch socket combination on the independent board with 1.5 sqmm cable complete as specified and directed.

All as per item No 1 here-in-before but for one 5 pin 6/16 Amps switch socket combination on independent board with 2.5 Sqmm PVC insulated unsheathed copper cable multistrand conductor 1100 volts grade and 2.5 sqmm copper conductor cable as earth continuity conductor complete as directed.

S&F Switch piano, flush type single pole, one way 6 Amp complete all as specified and as directed.

S&F Socket outlet,3 pin 6 amp flush type complete all as specified and as directed.

Supply and fix Switch socket combination 2in 1, 6 Amp flush type universal complete all as specified and as directed by the Engr-in-Charge.

Supply and fix Switch socket combination 2in 1, 3 pin, 6 and 16 Amp flush type universal complete all as specified and as directed by the Engr-in-Charge.

Supply and fix bell ding dong AC 230 volts, single pole complete all as specified and as directed.

Supply and fix Bell push, flush type, 5 amp complete all as specified and as directed by the Engr-in-Charge.

Supply and fix ceiling rose surface bakelite three terminal 65 x 50mm complete all as specified and as directed by the Engr-in-Charge.

S&F batton/ Angle holder insulated body with back plate suitable to batton fiting complete all as specified and as directed by the Engr-in-Charge.

Supply and fix PVC rectangular block with 3mm thick industrial plastic laminated sheet duly cut for fixing switch,socket, fan regulator etc of the following size complete all as specified and directed.

(a) Size 10cm x 10cm x 5cm.

(b) Size 25cm x 20 cm x 5 cm.

Supply and fixing LED light fittings 1x20 W ,220V,environmental friendly,energy efficient color temperature 6500K, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make LED Pride Essential Batten 20 W 6500 K of Havells catalogue no LHEXAWP7IN1W020 or equivalent approved make

Supply and fixing LED light fittings 1x10 W ,220V,environmental friendly,energy efficient color temperature 6500K, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make LED Pride plus neo of Havells catalogue no LHEXACP7IN1W010 or equivalent approved make

Supply and fixing LED luminaire 2X2 panel, colour temp 6500k,36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make Havells cat no LHEBAEP7IW1W036 or equivalent

Supply and fixing round shape downlighter 3 watt colour temp 6500K,220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete Make Havells cat no LHEBAMP7IZ1W003 or equivalent

Supply and fixing as in repair MCB DB TPN 4 ways double door with 200 Amps rated bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in repair MCB DB SPN 12 ways double door with 200 Amps rated bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in repair MCB DB SPN 8 ways double door with 200 Amps rated bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in repair MCB DB SPN 4 ways double door, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing in repair MCB 40 - 63 Amps, TPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing in repair MCB 40 - 63 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing in repair MCB 06 - 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in repair MCB 6 to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge.

Supply and fix sub-main wiring for main DB's to Sub DB's with PVC insulated & unsheathed two run of 2.5 Sqmm single core multi stranded copper conductor cable (FRLS), 1100 Volt grade alongwith one run of 2.5 Sqmm PVC insulated & unsheathed copper conductor cable (FRLS), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVC casing caping and including taking down existing one complete all as specified and as directed by the Engr-in-Charge. Note : Three runs of 2.5 Sqmm cable shall measured as one length.

Taking down ceiling fan of any type, any make and any sweep from its position for repairing work, opening the body and blade, checking for repalcement of unserviceable spares, cleaning, overhauling & greasing, replacement of unserviceable spare by new one, re-assembling of all the components, testing and hanging it up in its original position, complete all as specified and as directed. Note : New spare parts required for replacement shall be measured and paid seperately.

Supply only MS split pin size 2 " x 1/8 " for ceiling fan of 1200/1400mm Sweep complete all as specified and as directed.

Supply only Hanging bolt with nut of size 3/8" x 3 1/2 " for ceiling fan of 1200/1400mm Sweepcomplete all as specified and as directed. Make : TATA or equivalent approved make.

Supply only Rubber bush of size 1 1/2 " dia x 1" thick for ceiling fan of 1200/1400mm Sweep complete all as specified and as directed.

Supply only Ball bearing of size 6201/6202/6203 for ceiling fan of 1200/1400mm Sweep complete all as specified and as directed. Make : TATA/SKF

Supply only Gun Metal bushing for ceiling fan of 1200/1400mm Sweep complete all as specified and as directed. Make : TATA/SKF

S&F for standard blade fixing with screws suitable to ceiling fan 1200mm Sweep, after taking down old existing unserviceable, complete all as specified and as directed.

S&F for down rod of 1.5' height fabricated out of MS pipe 12 mm dia heavy duty painted with brown paint suitable to ceiling fan of any description make brand and model after taking down old existing unserviceable down rod complete all as specified and as directed.

S&F hanging hook "S" type suitable for ceiling fan of any capacity including taking down old unserviceable ones, complete all as specified and as directed.

Supply and fixing as in repair 2.5 mfd capacitor complete all as specified and as directed.

Supply and fixing as in repair 3.5 mfd capacitor complete all as specified and as directed.

Taking down exhaust fan of any type, any make and any sweep from its position for repairing work, opening the body and blade, checking for repalcement of unserviceable spares, cleaning, overhauling & greasing, replacement of unserviceable spare by new one, re-assembling of all the components, testing and hanging it up in its original position,including plywork, complete all as specified and as directed. Note : New spare parts required for replacement shall be measured and paid seperately.

Supply only Ball bearing 2001/ 2002/ 2003 for exhaust fans complete all as specified and as directed. Make : TATA/SKF

Supply only Metal bush bearing for exhaust fans complete all as specified and as directed. Make : TATA/SKF

Supply and fixing as in repair M.S. galvanised louvers suitable for exhust fan of size 300mm to 450mm sweep complete all as specified and as directed.

Material and labour for painting of ceiling fan of size 1200mm/ 1400mm sweep with down rod by spray painting with two coats of synthetic enamel paint after preparation old painted surface by scraping/ removing old paint by emery paper including writing of MES No complete all as specified and as directed.

Material and labour for painting of exhaust fan of size 300mm to 450mm sweep by spray painting with two coats of synthetic enamel paint after preparation old painted surface by scraping/ removing old paint by emery paper including writing of MES No complete all as specified and as directed.

M&L for wire flexible PVC insulated copper conductor twin core twisted of size 23/0.00076 including taking down old unserviceable ones, complete all as specified and as directed.

Taking down wall mounted Geyser of Capacity 25/50 ltrs by disconnection electric supply, water connections from single/Married/OTM Accns messes, billets, cafeteria etc., and dismantling the Geyser, descaling of silt deposited /cleaning of inner tank of geyser 25/50 Ltrs capacity including washing with clean water, checking the spare parts, re-assembling and testing after fixing of new spare parts and refixing after repairs/maint work the same to its original place after necessary testing, complete all as specified and as directed. Note:- Replacement of old spare parts are measured and paid separately under relevant items here-in-after as supply only rates and fixing charges for spare parts shall deemed to be inclusive in the quoted rates)

Supply only in repair for apparatus plate suitable for water storage heater of 25 / 50 ltrs capacity complete all as specified and as directed.

Supply only in repair for heating elements of 1.5 KW 230 V suitable for water heater of any type including connection with suitable cable complete all as specified and as directed.

Supply only in repair for heating elements of 2 KW 230 V suitable for water heater of any type including connection with suitable cable complete all as specified and as directed.

Supply only in repair for thermostat switch of geyser 230 V, 30 degree to 90 degree centigrade temp range to be set at 70 degree to 50 degree centi grade suitable for water heater complete all as specified and as directed.

Supply and fixing as in repair for bottom cover, made out of MS sheet 16 guage, duly paintedwith two coats of white synthetic enamel paint both side over a coat of red oxide zinc chrome primer for 25/50 Ltr capacity geyser complete all as specified and as directed.

Supply and fixing as in repair for top cover made out of MS sheet 16 guage, duly painted with two coats of white synthetic enamel paint both side over a coat of red oxide zinc chrome primer of 25/50 Ltr capacity geyser complete all as specified and as directed.

Supply and fixing as in repair for 450mm long brass CP braided hoses with 2 nuts without nipple suitable for geysers complete all as specified and as directed. Make : Jaquar Cat No 805B or equivalent approved make.

Supply and fixing as in repair for PVC inlet connector pipe 450mm long long for geyser, heavy duty, with brass coupling both ends to fix inlet of geyser complete all as specified and as directed. Make : Prayag/Polytuf

Material and labour for preparation of geysers outer body surfaces and painting one coat of synthetic enameled paint by spraying to geysers and writing MES No. on geyser in block letter not less than 5 mm wide and 25 mm high with black paint for 25 lit capacity of geysers complete all as specified and directed

S & F single pole and neutral enclosure with two pin and earth, plug and socket, suitable for single phase 240 V, complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking capacity 10 KA, including industial plug top, including taking down old u/s one complete all as specified and as directed.

Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 10 Sqmm 4 core as per IS 7098 (Part I) in trench or on floor / wall with suitable size clamp including connection with cable glands, aluminium lugs etc complete all as specified and as directed by the Engr-in-Charge.

.-Ditto- all as per item No.61 above but of size 16 sqmm 4 core.

Excavation in trenches, n. exc 1.5 m wide and n.exc 1.5 m in depth for laying of cables and getting out in soft/ loose soil complete all as specified and as directed by Engr-in-Charge.

Returning, filling in including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed by the Engr-in-Charge.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level , not exceeding 1.5 metre above the starting point complete all as specified and as directed by the Engr-in-Charge

Materials and labour for sand filling around the cable with approved quality coarse river sand for sand cushioning of Under ground cable including spreading and punning down to desired thickness complete all as specified and as directed by the Engr-in-Charge.

Supply and laying burnt brick sub class 'B' of size 25 X 12.5 X 7.5 cm locally available best quality laid in trenches for protections of under ground cable complete all as specified and as directed by the Engr-in-Charge .

Supply and fixing as in replacement 40mm bore steel tubes "light grade" galvanized with all fittings and fixed to walls and over ceilings complete all as specified and as directed by the Engr-in-Charge.

Cutting existing metal/bituminus road/PCC walk way/any type of tile works n.exc 0.45m width and n.exc 0.90 m in depth including all connected earth work and making good disturbed surfaces matching with the existing specification and finish including disposal of surplus material to a distance n.exc 50m complete all as specified and as directed by Engr-in-Charge.

Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised iron wire of dia 4mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel, earthing lead to be protected by galvanised iron pipe of 15 mm dia (Medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch or as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) and earthing pit with suitable handle including taking down earthing and necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) including testing on completion complete all as specified and as directed.

Taking down of old existing point wiring including fixtures and fittings such as switch, ceiling rose, holders, socket, etc and making good the distrubed surfaces as per the existing

Taking down of old existing sub main wiring and making good the distrubed surfaces as per the existing

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

VIDYUT SEVA KENDRA (BID ID -3267397)

M/S. R.D. Construction (BID ID -3263497)