COMPREHENSIVE REPAIR TO ROOF AND OTHER B/R SERVICES FOR WORKSHOP BLDG INDUSTRIAL SHED AND OTHER ACCOMMODATION AT COD CHHEOKI

Amount

M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and providing and applying and painting one coat of super coat 100% premium acrylic emulsion paint of approved make in required shade over a coat of primer and even finish over a coat of 2 to 3mm thick putty existing on cleaned/primered surface mechanically by paint sprayers machine on exposed brick wall/ plain wall surface) as per manufacturer,s specifacation etc. all complete including all tools,plants scaffolding, safety belts complete all as specified and directed

M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and providing and applying and painting two coat of super coat acrylic exterior paint of approved make in required shade over a coat of primer and even finish over a coat of 3 to 5mm thick putty existing on cleaned/primered surface mechanically by paint sprayers machine all complete including all tools,plants scaffolding, safety belts complete all as specified and directed

M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping machine tool/electric hand grinder or removal of paint from wall surface completely from exposed brick/ plasterd surfaces and providing and applying and painting one coat of oil emulsion distemper over a coat of primer and a coat of coat 2 to 3mm thick putty in required shade and even finish on over existing cleaned/primered surfacemechanically by paint sprayers machine on exposed brick wall/ plain wall surface) as per manufacturer,s specifacation etc. including all tools,plants scaffolding, safety belts complete all as specified and directed

M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping machine tool/electric hand grinder or removal of paint from wall surface completely from exposed brick/ plasterd surfaces and providing and applying and painting two coat of oil emulsion distemper over a coat of primer and a coat of coat 2 to 3mm thick putty in required shade and even finish on over existing cleaned/primered surfacemechanically by paint sprayers machine on exposed brick wall/ plain wall surface) as per manufacturer,s specifacation etc. including all tools,plants scaffolding, safety belts complete all as specified and directed

M&L for removing, scrapping & cleaning the existing/ old painted surface by scrapping machine tool/electric hand grinder or removal of paint from old wooden painted surface completely from exposed brick/ plasterd surfaces and providing& applying one coats of synthetic enamel paint on old painted surface of wood of over one coat of pink primer of approved brand and shade etc. by mechanically by paint sprayers machine irepairing of scratches, if any, with standard putty & enamel paint, sand papering after it dries complete all as specified and directed

M&L for removing, scrapping & cleaning the existing/ old painted surface by scrapping machine tool/electric hand grinder or removal of paint from old wooden painted surface completely from exposed brick/ plasterd surfaces and providing& applying two coat of synthetic enamel paint on old painted surface of wood of over one coat of primer of approved brand and shade etc. mechanically by paint sprayers machine irepairing of scratches, if any, with standard putty & enamel paint, sand papering after it dries complete all as specified and directed

M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping machine tool/electric hand grinder or removal of paint from wall surface completely from exposed brick/ plasterd surfaces including carnices etc. , scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetations etc kaking surface even and smooth and applying one coat of white wash on old surface of wall complete all as specified and directed

M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping machine tool/electric hand grinder or removal of paint from wall surface completely from exposed brick/ plasterd surfaces including carnices etc. , scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetations etc. making surface even and smooth and applying two coat of colour wash on old surface of wall complete all as specified and directed

M&L for preparation of old decorated surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surface surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping downsmoke soot, moulds and efflorescent salt and trading oil and greasy spots and stopping of distemperd surface and applying one coat of oil emulsion distemper of approved shade on surface of wall complete all as specified and directed

M&L for preparation of old painted surface of steel and iron materials by brooming down or steel wire brushing ,scrapping downsmoke soot, moulds and efflorescent salt and trading oil and greasy spots of any description , not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted mechanically by paint sprayers machinecomplete all as specified and directed

M&L for preparation of old plastered or unplastered surface of wall including carnices etc. by brooming down or steel wire brushing, scrapping downsmoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetations by scrapping machine tool/electric hand grinder and making the surface even and smooth by applying one coat of cement base paint white or tinted mechanically by paint sprayers machine on old surface of wall complete all as specified and directed

M&L for preparation of old plastered or unplastered surface of wall including carnices etc. by brooming down or steel wire brushing, scrapping downsmoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetations by scrapping machine tool/electric hand grinder and applying two coat of cement base paint white or tinted on old surface of wall mechanically by paint sprayers machinecomplete all as specified and directed

Dismantling of AC sheet corrugated/semi corrugted sheets in wall cladding or in roof covering complete all as specified and directed.

S&F 6mm thick asbestos cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed.

S& F 6mm thick asbestos cement two piece serrated ridges for corrugated or semi corrugated sheet fixed with L hook or J hooks or cranked hook bolts complete all as specified and directed

Dismantling plain or corrugated steel sheeting ,any gauge ,thickness incl Nainital or similar pattern roof covering

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed

Dismantling of wrought or mild steel work of any description and in any position complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified.

S&F framed work in doors or gates of angle or other section with gusset plates, rails braces etc, of grade Fe 410-w (grade E-250) quality-A complete drill for fixing of steel sheeting or other covering . Doors etc to be prepared by hanging and sliding with and including either hooks and hinges por steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing in repairs complete all as specified and directed.

S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts.

S & F roof trusses (framed) trussed, purlins, crane gantaries, rails and fastening and heavy braket framing (beam, tee, angle, chanel or flat section) including distance peices etc conforming to Fe 410 W Gde E-250 Quality-A complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any discription, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel and iron surface of any discription, not otherwise described, over 10cm in width or girth and applying tone coats of synthetic enamel paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M& l for 25mm thick cement concrete 1:2: 4 type B0( using 12.5 mm stone aggregate ) as in flooring.

M&L first or premium quality non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

M&L for Ist or premium quality of glazed ceramic coloured tiles 350x250x7mm/ 450x350x7mm thick, in vertical surfacesskirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.

M&L first or premium quality non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

M&L for first or premium quality Vitrified Ceramic light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F first or premium quality vitrified tiles, light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces such as Dado/Skirting etc. set and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.

S& fin repair vitreous china urinal half stalll type ( flat back) of size 635x395x420mm, white with graiting and union for discharge disharge pipe ( excluding flushing cistren including 32mm dia PTMT coupling and waste pipe, providing and fixing pllugs, bedding urinal against wall in CM 1:2 complete all as specified and directed.

Dismantling of wall and ceiling boards ( fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified

M & L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed with following:- (a) M & L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25 x 25 mm x 0.5mm (b) S & F 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners with rawl plug and screws plugging in RCC slab placed @ 605mm centre to centre from perimeter of wall. (c) S & F 25x25x0.5mm thick GI tee powder coated as main and cross members at 595 mm centre to centre supported suspenders along with adjustable clamp to maintain level. (d) S & F 4mm thick E-boards of approved texure and finished ceiling tiles of size 595 mm x 595 mm , confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F in repairs flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, complete all as specified and directed.

S&F in repair bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc and removing rubbish complete all as specified and directed.

M&L for brick work with subclass B bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto as above item No 42 but except Brick work

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified.

M&L for rendering 15mm thick in CM 1:6 on internal surfaces of brick or concrete work surface of wall and finished surface even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete work surface of wall and finished surface even and fair without using extra cement complete all as specified and directed.

M&L Rendering 10 mm thick in CM(1:3) on ceiling surfaces to be finished even and smooth without using extra cement complete as all specified and directed by Engineer-in-Charge

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

M&L preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

M & L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .

Demolition of cement concrete of any desription and in any position not otherwise specifically provided for complete all as specified and directed. .

M&L PCC 1:4:8 type D2, using (40 mm graded agg) ,100 mm thick as in sub base of flooring all as specified & directed

M&L PCC 1:2:4 type B2, using (40 mm graded agg) ,100 mm thick as in flooring all as specified & directed

M & L PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection without using extra cement complete all as specified and directed.

M&L PCC 1:2:4 type B1, using (20 mm graded agg) ,40 mm thick as in floors & pavings all as specified & directed

S&F glass dividing strip 3 mm thick and inserted in position to conform to design 38mm wide complete all as specified and directed.

M&L for spike rolling to surfaces or making impressions of expanded metal, whilst the concrete all as spd and directed.

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description not exc. 1.0 Sqm each leaf complete all as specified and directed.

Taking down shutters of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf complete all as specified and directed.

Refixing shutters of any description not exceeding 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware and renewal of unserviceable screws complete

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware and renewal of unserviceable screws complete.

S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete.

S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified & directed.

S&F 2nd class hardwood factory made, 30 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass, gauze etc (with sash bars) , divided into squares, with plain, chamfered or rounded, mitred and rebated sash bar any numbers for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) complete all as specified & directed.

Cutting holes in brick walls built in cement mortar, for inserting hold fasts exc half brick but n. exc one brick and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 complete all as specified and as directed

S&F 30mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made Solid PVC moulded door shutters 28 to 30 mm thick (stiles) with 2, raised panel design with 2 mm thick moulded Prelam on front face and 2 mm thick prelam PVC sheet on back side completed all aspecifed and directed.

S& F 1.25mm thick mild steel plain black sheet in wall cladding, steel gates / door shutters and ssimilar work, cut to size, holes punched includinground headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap jointswith riveted or welded seams, including bending or turning up, mitered angles as required.

S& F in repair steel window box type primer comrising ERW hollow ' P' section of size 60x25mm of 1.25 wall thick frame angle rebated skelton shutter made of ERW section 50x20 mm of 1 mm wall thickness and operated leaf sde huge with two Nos sash bars of T section 20x 30mm welded to frame of shutter and openable shutter prepared to recieve sheet glass comlete including cutting holes four prepared to recieve sheet glass complete including cutting holes four nois for each window and making good dismantled portion in PCC ( 1:2:4)type B-1 including following fittingss welded to frame / shutter:- Hold fast 150mm out of 25x 6mm flat iron made to shape 04 nos for each window( 02 Nos on each side). Handle of Z section 20x 25mm, 100mm long stopper 01 no for each leaf. MS tower bolt 150mm long -02 nos for each leaf. Cleat 55mm long of hollow ssquare section 15mmx15mm of 24 gauge wall thickness. Welded to hinge of 55mm size 01 No for each leaf fabrication & fixing complete.

Ditto all as per item no 73 above but without T sash bar to recieve wire gauge. Note :- Wire gauge & painting shall be measured and paid separately.

S&F mild steel framed work such as grills,gates,guard bars etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS;1868 with miniumum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

Taking down and refixing of aluminium door double or single leaf shutters after repairing, tightening of all loose joints and replacing rubber beading ,floor spring as requied and pivot top hinges, size of door exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. (note : Floor spring and pivot hinges shall be measured and paid separately.)

S&F 100mm sige, 4 lever, brass mortice lock for aluminium door lock including duplicate key complete all as spd and directed.

Supply only aluminium door shutter pivot complete all as spd and dircted.

S&F floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed.

S&F in repair floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed.

S&F in repair 25mm dia aluminium powder coated, curtain rails/ drapery rod including end brackets and end knobs, stops, rollers complete all as specified and directed.

S&F butt hinges extruded aluminium alloy with galvanised mild steel pin type B-21 of size 100mm including welding etc complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.

S&F 100mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.

S&F 125mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.

S&F 100 mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.

S&F in repair butt hinges, 100 mm size medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repair butt hinges, 75 mm size medium weight, cold rolled mild steel complete all as specified and directed.

S&F mild steel pressed handle oval type stove enameled black 150 mm size complete all as specified and directed.

S&F mild steel pressed handle oval type stove enameled black 125 mm size complete all as specified and directed.

S&F 150mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 100mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S& f in repair 300mm long aluminium alloy anodised sliding door bolts, with hasp staple ( bolt type) and fixing clips of sheet cast or extruded or cast aluminium allloy complete all as specified.

S&F in repair 75 mm hasp and staple safety type mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm fixed with screw are galvanised wire staple complete all as specified and directed.

S&F in repair double action floor spring hydraulicallly regulated made up of aluminium alloy sheet foundation box with stain less steel cover fixed to aluminium doors complete all as specified.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with wooden beads complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 3mm thick figured (one side) glass ordinary quality and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Securing glass of any description in existing wooden frames glazed with putty/beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves,reputtying and painting/oiling puttied surface to match existing work complete all as specified and directed

M&L for 5.5mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of newly wood or wooden based materials surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed. Make : Hindware/cera

S&F in repair vitreous china premium/ist quality wash down water closet wall hung EWC white/ ivory/off whuite closed pattern incl all necessary accessories like rag bolt, gel gasket etc.( excluding flushing cistern & flush pipe) complete in all respect all as specified and directed

S&F in repair plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding and connection to trap,out going flushing pipe,anti syphonage pipe etc.complete all as specified and as directed.Make : Hindware/cera

S&F in repaires PVC valve less syphonic action flushing cistern 10 ltrs capacity with all accessories low level white with inlet ball valve,float & handle and connection pipe,flush pipe including bracket complete all as specified and as directed.(Make- Hindware-Sleek/ Commander-Champion/Parryware- Slimline)

S&F in repair vitreous china wash basin, white, flat back type of size 550x400mm including brackets and cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling(cat No-ALD 705 of Jaguar or Equivallent) and 32 mm dia PVC waste pipe 450 mm long complete all as specified and directed. Make : Hindware/cera

S&Fin repair vitreous China urinals size 465x355x265mm, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; , flush pipe, grating and Union for discharge pipe 32mm dia complete all as specified and directed. Make : Hindware/cera

S& F repair vitreous china urinal half stalll type ( flat back) of size 635x395x420mm, white with graiting and union for discharge disharge pipe ( excluding flushing cistren including 32mm dia PTMT coupling and waste pipe, providing and fixing pllugs, bedding urinal against wall in CM 1:2 complete all as specified and directed. Make : Hindware/cera

S&F of health faucet (ABS) mild steel chromium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified and directed.

Supply & fixing PVC connection 15mm bore 60cm long with brass union at each end complete all as specified and directed.

Supply & fixing PVC connection 15mm bore 450cm long with brass union at each end complete all as specified and directed.

S&F stop valve cast copper alloy with butterfly or crutch handle, screwed down, high pressure with screwed both ends for iron pipes or for unions, 15 mm dia of pipe complete all as specified and directed.

S&F stop valve cast copper alloy with butterfly or crutch handle, screwed down, high pressure with screwed both ends for iron pipes or for unions, 20mm dia of pipe complete all as specified and directed.

S&F of soap dish disc(oval) type of stainless steel steel Chromium plated including Chromium plated brass screws and wooden/plastic cleats , complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) floor trap,plain with grating including jointing with solvent cement, complete all as specified and as directed.

S&F 15mm bore pillar taps cast copper alloy CP , long nack with Aerator , screwed down high pressure fancy type with or without lettered Hot or Cold with long screwed shanks and fly nuts complete all as specified and directed.

S&F toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repair sheet glass shelf assembly 60cm long, 12cm wide, made out of 5.5 mm thick glass with CP bracket guard and railing, fancy type, fixed to plug with CP screws and cup washer complete all as specified and directed.

S&F in repair low density polythene pipe(LDPE) of pressure rating 6 kg/sq cm,32mm bore for waste pipe of wash hand basin complete all as specified and directed.

S&F in repair low density polythene pipe(LDPE) of pressure rating 6 kg/sq cm,40mm bore for waste pipe of wash hand basin complete all as specified and directed.

S& F in repair hand shower chromium plated shower in bore of 15 mm dia pipe complete all as specified and directed

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore fancy type and fixed (Minimum weight 15mm 105 gms) complete all as specified and directed

S&F in repair bib tap , Long body of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 120gms) complete all as specified and directed

S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, fancy type, superior quality, fixed with screws complete all as specified and directed.

S&F in repair stop valves chromium plated screwed down, high pressure, with crutc or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe in the bore of 15mm dia pipe complete all as specified and directed.

S& f in repair brass CP center hole mixter for mixing hot & cold water screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe 15mm bore for WHB complete all as specified.

S& F in repairs walll mixture with provn for over head showers fancy with 115 mm long bend pipe on upper side connecting legs and wall flanges.

S& f in repair brass chromium plated shower rose 125 mm size, shower arm with swivel joints complete alll as specified and directed.

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

M&L for Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete all as specified.

Dismantling water tanks capacity exc 250 ltr & n ecx 500 ltr and removing to store

Dismantling water tanks capacity exc 500 ltr & n ecx 1000 ltr and removing to store

S&F rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F rotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

M & L for Cleaning and removing all scale and dirt, etc, from tanks capacity exc 250 & n. exc 500 litres and from mouths of circulating pipes, etc complete all as specified and directed.

M & L for Cleaning and removing all scale and dirt, etc, from tanks capacity exc 500 & n. exc 1000 litres and from mouths of circulating pipes, etc complete all as specified and directed.

S&F in repairs Ball Valves 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) as fixed in repair

Demolition and breaking up (salt glazed ware, AC, PVC) drain pipes of any dia set in cement mortar complete.

S & F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore complete.

S & F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 75mm bore complete.

S & F PVC (SWR) bends any radius, 110 mm bore complete.

S & F PVC (SWR) bends any radius, 75 mm bore complete.

S & F PVC (SWR) branch piece, single (single Y) equal or unequal, 110 mm bore complete.

S & F PVC (SWR) branch piece, single (single Y) equal or unequal, 75 mm bore complete.

Demolition of plain cement in any position including tar felt and cement mortar bedding etc from Roof or sunken portion complete all as specified and directed.

Complete removal of mud phuska from roofs of any thickness and removing the waste material from site to a distance exc.250m but not exc.500m and deposited where directed including cleaning of surface complete all as spd and directed.

Dismantling of brick tiles of terracing tiles, single layer on roofs complete all as spd and directed

M&L for plain cement concrete 1:2:4 type B-0(12.5mm graded stone aggregate) as in roof padding, roof kerbs, benching on roof slab and other similar works laid as per slope requied finished even and fair complete all as spd and directed

M&L for 15 mm thick plaster in CM 1:4 mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and direected.

M&L for cleaning the dust, durt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 tr/Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed.

M&L for laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3kg/Sqm) shall be done using butane torch maintaining 100mm ie overlap and 150mm end overlap, sealing all overlaps and bonded to the surface by fusing and bonding torchon complete all as specified and directed.(Note: All water proofing work shall be done as per manufacturer technical representative.)

Supply only liquid water proofing compound (ISI marked) complete all as spd and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level re-inforced complete all as specified and directed. .

M&L for providing RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in foundations incl rafts footings, foundation beams, plinth beams, bases of columns, basement slabs etc, including necessary form work complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia and over cut to length , bent to shape required including cranking bending etc and binding with mild steel wire (annealed ) not less than 0.90 mm dia as in reinforcement complete all as specified and directed.

Taking down rolling steel shutters of any size and thickness.

S&F steel rolling shutters (1.25mm thickness) without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; push or pull or manual type.

Taking down old unserviceable rolling shutters (upto 3mtr height) and complete oiling/ greasing to the shutters with channels and gear box etc with changing of minor parts like springs/rods etc if any required to make for smooth functioning by push and pull method or otherwise and refixing the same.

Taking down old unserviceable rolling shutters (height 3mtr to 6mtr) and complete oiling/ greasing to the shutters with channels and gear box etc with changing of minor parts like springs/rods etc if any required to make for smooth functioning by push and pull method or otherwise and refixing the same.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground.

Dismantling of chain link fencing

Excating in post holes (or similar holes) each n. exc 0.5cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in post holes, filling and mass concrete complete all as specified and directed.

S&F mild steel work with angle iron, flat iron, channel etc. as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flt iron fillets (sor securing wire mesh etc) including all necessary drilling, bolting or rivetting etc, and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires any mess, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wires, all as specified.

Supply only chain link MS galvanised fencing, any size or type

Vijay Builders

Vibha Enterprises

creative construction co.