PERIODICAL SERVICES TO BLDGS AND REPAIRS TO JOINERY ROOFING LEAKAGE SEEPAGE FLOORING ETC AT DHANGU MIL COMPLEX UNDER GE SOUTH PATHANKOT

Amount

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed.

All as per description of item 02 above but except bricks complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas,ceiling and roof projection etc incl taking out pealed off plaster/concrete and making good to cracked RCC surface in true line /shape by providing RCC 1:2:4 type b1 using 20 mm graded crushed stone aggregate including all necessary form work to thickness at required at GF and FF level finish even and smooth without using extra cement complete all as specified and as directed by eng-in charge.NOTE- the rate will be inclusive of scafolding for single or double storey including making hole in brick work and making good in cement mortar.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement including preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. all as specified.

M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement including two coats of cement base paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces and curing after applying each coat complete all as specified and directed.complete all as specified and directed

Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm and not exc 2.00 Sqm each, complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.

S&F prelaminated 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 sqm should be 11 Kg (+-5%) manufactured by ISO 9001-2015 certified company the sheet should be 100% water proof termite proof, fire retardent, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete including all fittings like handle, hinges, hydraulic stopper, beading etc as per direction of Engineer-in-charge.

S & F continous piano hinges (30mm width of flaps when open) mild steel, bright finish complete all as specified and directed

Dismentling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness at any height, including cover fillets, Providing and fixing tiled flase ceiling of size 595x595 mm incl of ceiling tiles in true horizontal level suspended on inter locking matrix 32 mm matel grid of hot dipped galvanised steel sections (galvanised @120gms per sqm both side incl) consisting of 3600mm long main "T" of size 24x25mm and 0.30mm thick and PPGI sheet wall angle of size 24x24mm and 0.40mm thick. Bottom exposed capping of width 24mm of all T sections shell be 0.25mm thick. PPGI wall angle is fixed aling the perimeter of ceilings to walls, partition or columns etc with rawl plug and wooden secrews at 300mm denters. Main T runners are than suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12mm dia and 38mm long dash fatners, 6 mm threaded rod with bolt for hanging arrangement of ceiling at max 1200 mm center to center along main T and not more than 150mm with slipped joints, the last hanger at the end of each main runner should not be greater than 600mm from adjecent wall. than 1200mm long cross T is interlocked between the main T at 600 mm center to center to form at grid 1200x600mm and than secondary cross of length 600mm is interlocked at middle of 1200x600mm grid to form grids of 600mmx600mm. cross T at the ends having length more than 600mm are to be supported independently. Finally PVC laminated with aluminium foil back board tiles of size 600x600x7 to 8mm thick tiles having light refectors of >=75% are placed in the grid incl dismentling of wall and ceiling board (fiber, pulp, insulation, etc) or insulation boards/ slabs/ blanket, any thickness complete all as specified and directed.

Ditto as per srl no 13 here in before but except false ceiling tiles of any size, shape and specifications all as directed by engr in charge.

Ditto as per srl no 13 here in before but except grid of false ceiling of any size, shape,specifications all as directed by engr in charge.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life)

S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

M&L for powder coated aluminium door frame with shutter, side hung type with sash bars, locking rails, locking arrangements and closing arrangement ,door floor spring including necessay joinery cleats, glazing clips, rubber packing, chowkats aluminium snap beading, screws, suitable handle size complete etc with and including sheet glass or ordinary glazing quality of 4mm thick, size of lock rail 44.45x81.50mm, side rail 85x44.45mm top rail 83.5x44.45mm, bottom rail 101.6x44.45mm and size of chowkats frame 101.6x44.45mm and thickness of aluminium member not less than 1.40mm thick complete all as specified and directed.

M&L for powder coated aluminium window frame with shutters, side hung type with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 4mm thick size of side rails , top rails , bottom rail 85x44.5mm and size of chowkats frame 101.6x44.45mm and thickness of aluminium member not less than 1.40mm thick complete all as specified and directed.

S&F for partition consisting of anodized aluminiunm section of size 101.6x44.45 with 5.5mm thick toughened glass/backlight sheet fixed with rubber gasket and aluminium beading 20x3mm size in position complete all as specified and directed.

S&F in repair 5mm thick tinted glass in door/window shuters with aluminium beading/glazing clip of both side complete all as specified and directed.

S&F in repair aluminium body door closer hydraulically regulated designation No 3 universal type of dia cast body, suitable for door shutter for taking weight up to 80kg complete all as specified and directed.

M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as directed.

Refixing Aluminum frame with suitable rawl plugs with brick/concrete wall all as per direction of Engineer-in -charge including finishing Jams surface with existing wall surface all as specifed.

Refixing Aluminum shutter of any dscription exc 1.00 Sqm n exc 2.50 sqm each after Easing and adjusting by opening all side members and refix with cleats and screw in true alignment including existing fitting/fixtures as in the same opening complete with Aluminum frame all as specifed & directed

S&F for aluminium mortice lock, vertical type 75mm size of 4 lever all as specified and as directed by Engineer-in-charge.

S&F pressed steel frame for door made out of MS sheet 1.25mm thick of size 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F pressed steel frame for doors made out of MS sheet 1.25mm thick of size 125mmx60mm for with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F steel window/ventilator with tubular frame factory made double shutters of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for cement concrete type C-0, 1:3:6 using 12.5 mm graded crushed stone aggregate as in back filling of hollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.

S&F 35mm thick 2nd class hard wood in glazed and Skelton factory made shutters open rebated and prepared to receive glass/wire gauge etc with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/wire mesh etc sizes of members as per clause 8.20(a) of SSR Part-I complete all as specified and directed.

Preparing wood or wood based new or untreated surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F in repair 300mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required complete all as specified and directed.

S&F 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked complete all as specified and directed.

S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled ISI marked aluminium complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F floor door stopper of overall length of cover plate 140mm or 150mm alluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames,glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes including glass pin complete all as specified and directed.

S&F Acrylic transparent sheet 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes including glass pin complete all as specified and directed.

S&F in repair Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass secrews, pointing around urinal in back in cement; fixing automatic cistern with brackts, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20gms-210 gms) including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

All as per srl item No 45 above but capacity of water tank 1000 ltr complete all as specified and directed

S&F glavinized mild steel wire cloths 0.56mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or glavinized wire staples complete all as specified and directed.

Dismantling of wall tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises,M&L for providing glazed ceramic coloured wall tiles of size 450mmx350mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises,M&L Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises ,M&L Ceramic colouerd tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors etc.set and jointed in neat cement slurry with and pointed in coloured cement match the colour of tiles over 15mm thick screed bed in cement mortar 1:4 all as spd.

Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises, M&L vitrified ceramic tiles 10 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water,M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement mixed with and including water proofing coumpound including formwork at any height including two coats of cement base paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces and curing after applying each coat complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water,M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement includingPreparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water,M&L rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas with drip course, ceiling and roof projection at any height making the line in true shape finished even & smooth without using extra cement and applying three coats of white wash complete all as specified and directed.

Taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceable pipe,S&F GI tube 20mm bore medium grade galvanized with all fitting and fixed to short length complete all as specified and directed.

Taking up or down GI pipe 15mm bore and connections, including cleaning for refixing or removal unserviceable pipe,S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls complete all as specified and directed.

S&F in repair 20mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified

S&F in repair bib taps, standard of PTMT any colour high pressure screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair angle stop valve, standard of PTMT any colour high pressure screwed for for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair pillar tap of PTMT any colour screwed for iron pipe 15mm dia complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) white colour including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc complete all as specified and directed.

S&F in repairs vitreous china squatting pan, Orissa pattern size 580mm x 440mm ivory with integral foot rest including connection to drain out pipe and to flush pipe, anti-syphonage pipe etc complete including making good the disturbed flooring of existing specifications complete all as specified and directed.

S&F Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand over 10mm thick rendering in cement mortar 1:4 mixed with liquid water proofing admixture of approved brand complete all as specifed & directed.

Demolition of Concrete of any description (unreinforced) and in any position as directed by Engineer-in-Charge

M&L for 1:5:10 type E2 cement concrete in foundation , filling and mass concrete complete all as spd and directed

S&F in repair plastic water closet seat cover, back closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flate back or angle back type) coloured of bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets complete all as specified and directed.

S&F in repairs 10 litres PVC low level flushing cistern syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed.

S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed.

S&F grating round 140mm size of PTMT (minium weight 50gms) as in repair, complete all as specified and directed.

S&F in repair bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified & directed.

S&F in repairs 15mm bore Angle valve fancy type chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair pillar tap chromium plated fancy type with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F in repairs chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair of CP health faucet with 1.00mtr flexible tube &hook fixed with and incl CP screws complete all as specified and directed.

S&F in repair Stainless steel Plate rack 1mm thick of size 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete all as specified and directed.

Roughening the surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc with and including taking out existing roof treatments, brushing neat cement slurry with 3.0 Kg of cement per sqm and providing 10mm thick rendering in Cement mortar 1:4 on fair faces of concrete, finished even and fair mixed with and including water proofing compound to receive treatment on roof Providing and laying of water proofing treatment of roof APP (Atactic Polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, with non woven polyester mat reinforcement of 160 gsm, weight of membrane @ 3.6 Kg/Sqm over a solvent based bitumen primer, @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 , The membrane shall be laid using bitmun torch.The end lap should be 100 mm and the side lap must be minimum 75 mm the membrane shall be first laid up to the parapet wall junction and then shallbe overlapped with another membrane (flashing) with an overlap covering up to a distance of 300mm. In case parapet height is less than/ up to 500 mm, membrane shall be terminated at the top of parapet.All rain water pipe opening shall be suitably sealed with the APP membrane all as specified and directed by Engr-in-Charge. Note : includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster)

M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in padding over roof slab for providing proper slabs, and finishing the surfaces even & smooth without using extra cement, complete all as specified and directed.

Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and directed

Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid dry complete all as specified and directed.

M&L machine cut kota stone, stone slab flooring 20-25mm thick over screed bed 20mm thick in cement mortar 1:4 set, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and granite polishing complete all as specified.

S&F machine pressed precast concrete interlocking paver blocks with grey cement and no pigment, any shape and size conforming to IS 15658:2006 of 60 mm thickness M35 grade complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillers, window-cills, cooking platforms and like fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Cement concrete in foundations, filling and mass concrete type B-2, 1:4:8 using 40 mm graded stone aggregate as in sub base of tiles/blocks complete.

Chequered cement concrete coloured, table vibrated chemical coated, tiles 300mm x 300 mm x 25 mm thick table set and jointed, pointed in neat cement slurry with grey cement and no pigment as in floor,Screed bed or bedding layer of 20 mm thick CM (1:6) as in floor, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed

Repair the leakage/seepage/hole/crack of roof sheet of any description and in any position and upto 7.5 m height using Super flash Strip 100/150 mm wide .

Taking down of old PVC wall lining, preparation of surface, S&F solid PVC Wall lining consisting of 5mm thick printed colour PVC sheet inclusive of solvent cement and fixing at site on pvc frame as per specifications and drawings, complete all as specified and directed.

Taking down of old PVC sheet fillets, S&F 5 mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing, complete all as specified and directed.

Dismantling/taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe 75mm or 100mm dia with all fittings, complete all as specified and directed.

S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with sufficent number of Iron stack clamp complete all as specified and directed.

Dismantling timber scantling inc old wooden trusses , purlins, rafter etc complete all as specified and directed.

M&L steel work in tublar trussed incl special shaped washers etc complete using ERW or induction butt welded tubes conferming to IS 1161-1979 gde St -240 incl purlines complete all as specified and directed.

steel work in plates (plain or chequered) channels,square cut or notched (ordinary and counter sunk) Forming holes with riveted,bolted,or welded attachments complete all as spd and directed by eng.in.charge.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings,M&L Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws and overlap with sufficient laps complete all as specified and directed by Engineer-in-Charge.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings,M&L pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws complete all as specified and directed.

Preparing the new steel surfaces of any description over 10cm width or girth priming with red oxide zinc crome and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed.

S&F of 110 mm PVC (SWR) drain pipes 110 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed.

S&F for 110mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes as in repair complete all as specified and directed.

S&F in replacement 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed.

S&F for 75mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes as in repair complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, facia of upward chajjas portion with mechanical means at height G+1 and similar suspended work. etc complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 as in Slab supported on wall, beams and column in floors,roofs, landings, balconies, canopies, deck slabs and in the shelves, cover slab complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 columns,pillars,piers,posts and struts complete all as specified and directed.

M&L for form work to sides and soffits of slab, beams, columns, shelves etc for rough finished surfaces of concrete complete all as specifed and directed.

Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specifed and directed.

S&F in repair 32mm bore corrugated PVC waste pipe complete

S&F CP brass Soap Dish fixed with and incl CP screws of as approved.

M&L cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth all as specified.

S&F in repair pvc curtain rod 25mm dia pre-painted synthetic enamel paint of cherry colour finishes fixed with screws

S&F in repair PVC bracket prepainted cherry colour with screw, hole suitable for 25mm dia PVC rod fixed with screws and gutties in wall .

All as per srl item No.114 above , but end caps with wall ornament (Cherry/Golden) and fixed to curtain rod with screws of design/shape all as specified and directed.

Refixing of door shutters in same opening of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

S&F in repair Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars; barred iron doors;l adders; framed balusters; walk ways; railings; framework of water tanks, cattle trap and similar work conforming to Fe.290. Gde-E-165,ornamental and intricate design complete all as spd and directed.

S&F in repair PVC tank lid/cover for water storage tank of 500/1000 ltrs capacity with fixing arrangement complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying one coat of white wash all as specified & dirrected.

Preparation of old plastered or unplastered surfaces of ceiling including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying one coat of white wash on ceiling complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying one coat of oil bound distemper on walls all as specified and directed

Preparation of old plastered or unplastered surfaces of ceiling including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying one coat of oil bound distemper on ceiling complete all as specified and directed

Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying two coat of oil bound distemper on walls all as specified and directed

Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying one coat of Plastic emulsion Paint on wall complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying one coat of cement base paint of approved colour scheme on wall complete all as specified and directed

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying two coat of cement base paint of approved colour scheme on wall complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on old wooden surface complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and and applying one coat of synthetic enamel paint on old steel surfaces complete all as specified and directed.

M&L for preparation of old surfaces of wall,roof projection/ window chajjas and similar surfaces and applying two coat of weather proof exterior emulsion paint complete all as per manufactured and directed by Engr-in-Charge. Note : - Tint/Shade shall be approved by Engr-in-Charge.

M&L for preparation of old surfaces of wall, roof projection/ window chajjas and similar surfaces and applying one coat weather proof exterior emulsion paint complete all as per manufactured and directed by Engr-in-Charge. Note : - Tint/Shade shall be approved by Engr-in-Charge.

M&L for Preparation of existing surface finished by 1 mm thick of wall care putty on surfaces of wall and applying one coat of asian primer over two coat of oil bound distempr on old wall surfaces complete all as specified and directed.

M&L for preparation of existing surface finished by wall care putty on surfaces of ceiling and applying one coat of asian primer over two coat of oil bound distemper on old ceiling surfaces complete all as specified and directed

M&L for preparation of new/old plastered surface and applying priming coat and providing heritage finish ( Texture finish with metalic colours in any design) in any shade to colour as approved by Engineer-in-Charge and as per manufacture instructions, complete all as specified and directed.

M&L for preparation of old surface of kerb stone, road lining, arrows etc and applying one coat of road marking paint in any shape and colour as approved by Engr-in-charge.

M&L for preparation of old painted steel surfaces of any description not otherwise described and making design of MES Logo with synthetic enamel paint of any size on steel/wooden surface as approved by Engr in Charge complete all as specified and directed.

M&L for remove all loose gravel cement mortar, dirt, oil, grease and foreign material by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminous material manually and with heal torch gun to get smooth plain finished surface with no loose material on surface. Repair all joints & cracks with highly elastic bituminous cold applied putty tarplasic having penetration after setting upto 8mm Levelling of surface to give proper slope will be done as per site requirements with Shalipatch cold applied, Bituminous Motor & Cold emulsion cum waterproofing liquid Shalikote T-10, Created SSD condition on surface with water. Prime the surface with Tarfelt LM or equivalent make of approved by GE mixed with portable water in the ration of 1:1 and apply @ 400gm per Sqm (As per surface conditions). Apply first coat of Tarfelt LM or equivalent make of approved by GE having elongation 200% conforming to ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.50mm conforming to ASTM-C-412 with no dilation of water on primed surface while the surface is still tacky with consumption of 700gm per Sqm. * Lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. * Allow the first coat to dry for 10 to 12 Hrs. * Apply 2nd coat on cured first coat with consumption @ 700gm per Sqm in opposite direction of first coat by Brush or Roller.* Allow it to dry for 10-12hrs after apply 3rd coat with consumption @ 700gm per Sqm. Ensure final curing time of 36 hrs before allowing/carrying out any further work,. Conduct ponding test after min 7 day applying two coats of U V Resistant Elastomeric Exterior Acrylic Weather resistant water proof coating of Shalicryl-215 or equivalent make of approved by GE having elongation of 300% after curing of 14 days conforming to ASTMD-6083—for U V Protection of Bituminous Elastomeric Acrylic Emulsified Liquid Membrane of Tarfelt LM or equivalent make of approved by GE to give long life and prevent its deterioration from sunlight.

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

Amarjit Brothers

Rajinder Kumar Manhas

Jay Ann Construction Company

M/s GIrdhari Lal Rakesh Kumar