GE/863/EWS-T-26 OF 2025-26 SPL REPAIR TO BLDG NO T-184 FOR STORAGE OF CLOTHING STORE AT SUMDO IN THE AREA OF AGE BR-III SUMDO AND AGE EM (WE) POOH UNDER GE 863 EWS

Amount

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

M &L for 25 mm thick PCC 1:2:4 type BO (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge

M&L screed bed or bedding layer of mortar 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite complete all as specified and directed by Engr-in-charge.

M&L for machine cut kota stone slab flooring of size 550mm X 550mm X 20-25mm thick mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L PCC (1:3:6) type C-1 using 20mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement incl providing joints n.exc. 2.00 m in length & filling with bitumastic filling complete all as specified and directed by Engr-in-charge

M&L for 75 mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base under Chequered tiles complete all as specified and directed by Engr-in-charge.

M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed by Engr-in-charge

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed by Engr-in-charge

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge

S&F Pre- painted galvatume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge

S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed by Engr-in-charge

Dismantling structural steel work in cluding doors, gates but excluding framed truss etc complete all as specified and directed by Engr-in-charge

M&L Roof trusses (framed),trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including Fe 410-W (Gde E- 250) quality A complete all as specified and directed by Engr-in-charge

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 (Gde-E- 250) quality-A) complete all as specified and directed by Engr-in-charge

S&F 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed by Engr-in-charge

M&L for preparation of new painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying Two coat of synthetic enamel paint (first quality) complete all as specified and directed by Engr-in-charge

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (first quality) complete all as specified and directed by Engr-in-charge

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed by Engr-in-charge

S&F 3mm thick glass sheet any size ordinary qlty in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc. complete all as specified and directed by Engr-in-charge

Demolition of precast concrete block walling built in cement morter complete all as specified and directed by Engr-in-charge

M&L for precast cement concrete block masonary walling type C-I 1:3:6 using 20mm graded aggregate with solid blocks, exc. 10 cm in width and setting in CM 1:6 complete all as specified and directed by Engr-in-charge

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for PCC 1:2:4 type B1, using 20mm graded stone aggregated as in plinth band, lintel band, roof band , lintel bands, copings and other similar bands etc complete all as specified and directed by Engr-in-charge

M & L for rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-charge

M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed by Engr-in-charge

Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed.

S&F 35mm second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 300mm long aluminium anodised sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed by Engr-in-charge.

S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge, pin anodized complete all as specified and directed by Engr-in-charge

S&F 150mm long aluminium anodised handle fabricated type complete all as specified and as directed by Engineer-In-Charge.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by Engineer-In-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, , pendents, regulators sockets, light fittings , holder, bell push, ding dong etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making good disturbed suefaces of walls, floor etc.

M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc. all as specified for one light point/ fan Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 3 here-in-before but controlled with one 3 pin socket outlet 5 Amp, independent board with other switches with cable 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

All as per srl item no 2 here-in-before but controlled with one 3 pin socket 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as specified and directed by Engineer-in-Charge.

All as per srl item no 2 here-in-before but controlled with one 3 pin socket 15 Amp on the independent board with other switches with cables 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of socket outlet 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge,

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, Make :ANCHOR or equivalent.

Supply and fixing switch piano type 15 Amp, 230 Volts flush button single pole one way complete all as specified and directed by Engineer-in-Charge.

Supply and fixing socket outlet 3 pin 15 Amp, 2-in one , 230 volts flush type230 Volts flush type complete all as specified and directed by Engineer-in-Charge.

M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. Make :ANCHOR or equivalent.

S/F in replacement LED integrated batten tube light fittings 20W 4 Feet long complete with twin core twisted flexible copper conductor cable complete all as specfied and directed.

Supply and fixing LED Lamp 12 Watt in lamp (bulb) holder complete all as specified and directed.

Supply and fix Bajaj LED Bulk head light fittings, 10 W cool white, color temperature 3500-4100K wall mounting type complete all as specifed and directed of equavalent make : CG/Philips/wipro etc.

Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and direct by Engineer-in-Charge .

Supply and fixing in replacement of miniature circuit breaker (MCB) SPN 32 AMP rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning

Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

M & L in replacement for earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thicj\k buried directly in ground ( earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia as earth continuty conductor by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR-I 2010, connected to main switch board all as specified and including testing on completion , necessary excation, earthwork, PCC works ans CI earth pit cover with watering pipe 20 mm dia GI pipe medium grade , funeels with wire mesh and lugs GI pipe of 15 mm dia of light grade for protection of earth wire upto 7.5 mtrs complete all as specified and directed by Engineer-in-Charge. Note:- On testing after completion if the desired resistance is not obtained the earthing shall be re- done aat no extra cost.

Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm complete

Supply and fixing air termination single pointed aluminium rod 12 mm 300 mm long include fixing on aluminium flat saddle on roof/wall with ms clamp/ nut bolt washer complete all as specified and directed.

M&L for Aluminium strip 25 x 3mm with saddles and fixing screws etc for roof conductor and down conductors above ground for fitting the strips.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised earth strip 32 x 6 mm means of bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 40 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion.

Supply and fixing test point terminal block made of gun metal or phosphorus bronze size drilled and screwed including75x75x25mm 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.

Schedule of Credit

M/S Gopal Singh (BID ID -3317809)

H S ENTERPRISE (BID ID -3325181)

M/S JOHN VASSELLY (BID ID -3317271)

M/S PAWAN KUMAR NEGI GOVT. CONTRACTOR (BID ID -3317774)