PROVISION OF CAR PARKING SHED FOR JCOS MD ACCN BLOCK NO. P-38, P-37, P-44 AND OTHER SANCTIONED WORKS AT MIL STN ABOHAR.

Amount

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1 Sqm but not exceeding 4 Sqm each and complete all as specified and directed by Engineer - in - Charge.

M&L for Brick work using fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick wall,ceiling surface etc including racking out joints, hacking for keys scrubbing down with water all as specified .

M & L rendering 15mm thick on fair faces or other than fair faces of brick work in CM 1:6 finished even & smooth without using extra cement all as specified .

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces, in cement mortar (1:4), in two layers of 10+5mm thick with using water proofing compound as per manufacturer's instructions, surfaces finished even and smooth without using extra cementcomplete all as specified.

M & L two coats of cement base paint over new plastered surface including preparation of surface complete all as specified and directed by Engineer - in - Charge.

M & L Preparation of Old plastered surfaces by removing old treatment and applying two coats of interior grade 1mm wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of Acrylic distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge.

M & L Preparation of newly plastered surfaces applying two coats of Acrylic distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge.

Supply and fixing 40mm Flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides, covered with 0.8 mm GI sheet both side and one side lead 2mm thick (inside) ,300X300 mm flash view of toughened glass and both side dead lock operation with "D" handle per shutter for X Ray room, complete all as specified and directed.

S & F pressed steel door frames size of 105X60mm thickness of sheet shall be 1.25 mm with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed by Engineer - in - Charge.

M & L providing two coats of synthetic enamel paint over new steel surfaces and a coat of red oxide primer on including preparation of surface of any description not exceeding 10 cm width or girth complete all as specified and directed by Engineer -in -charge.

Excavation in trenches any type of soil , n exc 1.5m wide and n exc 1.5m in depth , for foundation , etc or for shaft, well, cesspits , manholes , pier hole etc n exc 1.5 m in depth and getting out for laying of cable complete all as specificed and directed.

Returning , filling in including, spreading , levelling , watering and well reamming in layers not exc. 25 cm within the 1 mtr strech complete all as specificed and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specificed and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out on soft or loose soil

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken bricks

M&L for PCC 1:3:6 Type C-2 (40 mm graded aggregate ) 75 mm thick as in sub base all as specified.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand and complete all as specified and directed by Engineer-in-Charge.

Excavation in post holes each n. exc. 0.50Cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface.

M&L for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in foundation of cols, bdy pillars, posts, struts, etc. filling and mass concrete complete all as specified and shown on drawing.

S&F Structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes grade St-240 complete all as specified and as shown on drawing.

S & F exc 12mm dia & n. exc 20mm dia exc 30mm long MS screw bolt machine made with hexagonal or Square head at one end and screwed the other,screwed end fixed with washer complete

S & F Pre- painted galvalume Cladding aluminum zinc coating GI based corrugated steel sheet 0.55mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

M&L for three coat white wash to the wall surfaces after preparation to the new plastered surfaces .

S&F solid PVC Wall lining consisting of 5 mm thik wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

5 mm thik PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing

S&F Anodised aluminium snap grid frame work for false ceiling all as specified size of grid 605x605 mm

Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately)

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3½ core including provision of LT cable path indicator CI round shape mentioning LT cable of Blue color paint fixed with 0.75 Mtr lenth angle iron of size 40x40x4 mm laying intervals 20 Mtr and refer laying of cable shall be compile with SSR Part -I Section 19.75.1 Note: Cable path indicators and end termination joints with aluminium lugs/thimbles deemed to include with quoted rates

Supply & install, commissioning, testing of out door type feeder pillar, LT type (CPRI approved) of size 1.0 mtr x 1.0 mtr x 0.6 mtr fabricated out of 3.15mm thick CRCA sheet angle size 50 x 50 x 5 mm thick frame factory made totally enclosed dust and vermin proof are side hinged opening arrangement on front and back with weather proof canopy of top with locking arrangement, cable entry and exist from bottom both side complete all as specified and directed. i). INCOMING: a) MCCB 160 A,415 Volts 4 pole, 25 KA-(Adj Thermal Mag sett)-01 Nos b) Indicator lamp LED type (set of three Red,Yellow,Blue)-01 Set ii) OUTGOING c) MCCB 100 A,415 Volts 4 pole 25 KA-03 Nos e) MCB 63 A,230 Volts 2 pole 16 KA, DP-02 Nos f) MCB 40A,230 Volts 2 pole 16 KA, DP-02 Nos h) Copper bus bar 40mmx6mmx reqd length-04 noss (j) Digital Volt meter & Ammeter with suitable CT's each set

M&L for Earthing for Panels complete with galvanized steel plate electrode of size 600x600x6.3mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanized iron earth strip of size 25 x 4mm earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed.

All as per item no. 31 but Chemical earthing with copper earth plate 90x60cmx5mm & copper earth strip 32x6 mm complete all as specified and directed

Supply and fixing RCCB of 4 pole 63 Amps rating with sensitivity of 30 mA suitable for 415 volts

Supply and fixing Plug and socket type triple pole and earth enclosure DB (Functional Unit) 63 Amps capacity with provision of TPN 63 amps MCB, plug top and earth plug, grouted flush to walls complete all as specified. Make-Havells/ Schneider/C&S

M&L for submain wiring comprising single core ,4 Runs of 25 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits and conduit fittings/existing concealed PVC conduit and conduit fittings not less than 40 mm dia complete, including provision of 2x16 sqmm nominal cross sectional area multimultistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

M & L Cutting chases, pinning in, making god to facings where reuired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc ; and cutting chases for concealed water tubing or concealed wiring etc, and making good, cutting not exc 10 cm girth in brick walls complete all as directed by Engr-in-charge .

M & L for sand cushioning with dry coarse sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment.

Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified anddirected.

Supply and Fixing Air Ventilator of size 24 inches, turbine dia 800 mm, throat dia 600 mm, No of fins 42 and constructed with rain proof rugged spider design, strong light weight construction, stainless steel top plate & Bottom ring, rigid roll formed curved aluminium vanes , FRP base plate including fixing in GI Sheet roof complete all as specified and directed.

M&L forLight/Fan Point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through concealed in wall/ceiling surface and its accessories including PVC rigid concealed conduit heavy duty suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switchs, sockets, fan regulator etc covered with 3 mm thick plastic laminated Hylem top cover sheet of required color fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer including fixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for the following all as specified

All as per item no. 40 here-in-before but with 2.5 sqmm cable for 1No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor all as specified

S&F Piano type switch single pole 1 way 5/6 amps 230 volt AC supply complete all as specified

S&F Piano type switch single pole 1 way 15/16 amps 230 volt AC supply complete all as specified

Supply and fix High efficiency IP66 LED Floodlight with pressure die cast aluminiun housing in rectangle shape and toughened glass in the front of capacity 100 watt complete with hanging assembly all as specified and directed..

S&F Heavy duty wall fan (High Air thrust Fan) with 600mm Sweep PRM 1375 Consumption in watt 200 watt, Air displacement 15000 M3/Hr made with hight torque gear box with safety clutch for longer gear life 90 degree oscilation copmlete all as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps capacity complete all as specified.

S & Laid G I Pipe 15 mm 'Medium Grade with all fittings complete all as specified & directed.

Supply and fixing Stop valve cast copper alloy fancy type, chromium plated with long shank and cup (Concealed type) with crutch or butterfly handle screwed down high pressure screwed lfor Iron pipe or brass feuurle for 15mm bore pipes complete all as specified .

Supply and fixing Bib tap cast copper alloy with crutch or butterfly handle screwed down high pressure screwed for iron pipe or brass ferrule for 15mm bore pipes complete all as specified.

M&L for making exahust fan hole on walls for fixing of exhaust fan of size 380mm in wall including plastering and painting work to make surface good as existng complete all as specified and directed.

All as per item no. 40 but One 5 pin socket out let 5 amps on the same board with other switches

All as per item no. 40 but One 5 pin, 5A switch socket outlet point on independent board with other switches.

S&F Modular switch 1 way 6A, 1 module 230 volt AC supply complete all as specified

S&F Modular Socket, 6A - 2/3 pin combined 2 module, 230 volt AC supply complete all as specified

S&F Modular switch 1 way 16A, 1 module 230 volt AC supply complete all as specified

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module, 230 volt AC supply complete all as specified

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified

S & F in sheet metal enclosures for DBs double door type when MCBs to be used single pole & nuteral 8 ways s all as specified and directed by Engg-in-Charge.

S&F LED Recess Mounted back-lit LED 2X2 tile in CRCA housing with full opal diffuser suitable for Armstrong/Grid ceiling of capacity 36 Watt complete all as specified and directed.

M&L for submain wiring comprising single core ,2 Runs of 4 sqmm nominal cross sectional area multi stranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in surface/recessed PVC conduit and its fittings complete including provision of 1X4 sqmm nominal cross sectional area multi stranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete all as specified and directed by Engr-In-charge. Note :- (i) Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly. (ii) Run of three cable shall be measured as 1RM.

Supply and install hi wall split capacity 02 Ton units indoor/ outdoor complete with cordless remote control unit and with cooling and heating function of capacity for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity with latest manufacturing year complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete.

S& F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 25 Amps complete all as specified.

G S CONSTRUCTIONS

SHRI SHYAM CONSTRUCTION CO.

RANDHIR AND COMPANY

Ramdev Enterprises

P.K ENTERPRISES