Providing, installation and commissioning of submersible pumping machinery along with allied Electro-Mechanical works for Augmentation in connection to Accommodate FHTC at P.H. No.-I (New) under Chandpur W/S scheme, Zone-I under Block_ Hasnabad Dis

Amount

PART-A Supply delivery at site of Submersible pumping machinery directly coupled with water proof suitable size motor having following specification and as per NIT specification : DISCHARGE : 45 cubic mtr./Hr. HEAD : 36 Mtr. *N.B. (A) H/Q characteristic curve chart of pump set should be submitted before delivery. (B) Test Certificate of pump & motor should be submitted during delivery. T.W.Size-300mm x 200mm

Supply delivery at site of 2.5 Sq. mm. 3 core, water proof flat copper cable as per specification of NIT N.B:- Cable should be supplied as per site requirement.

Supply delivery at site of 1.1 Kv Grade 25sq. mm. 4 core XLPE insulated Al .Ar. Armoured cable as per specification of NIT . N.B:- Cable should be supplied as per site requirement.

Supply delivery at site of 1.1 Kv Grade 12 core, 2.5 Sq. mm. Armoured copper control cable as per specification of NIT. N.B:- Cable should be supplied as per site requirement.

Supply delivery at site of 100 Amp Kit-kat rewirable porcelain fuse unit (both base and bridge)as per specification of NIT

Supply delivery at site of 100 Amp. TPN, 415V, main switch with rewireable type fuse link in sheet steel enclosure.as per specification of NIT

Supply delivery at site of 100 Amps.4 way wall mounted Bus-Bar chamber having 4 Nos. Copper Bus-Bar.as per specification of NIT

Supply delivery fitting fixing of 100 Amp. 4 pole on load change over switch.

Supply & delivery at site 2 mm thick CRCAsheet steel enclosed type Indoor wall Mounted 415 V MCC cum PDB Panel having required Feeders wih PLC as per specification of NIT (7.5 HP to 12.5 HP)

Supply and delivery at site of 80 mm dia 3 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and as per specification of NIT

Supply and delivery at site of 80 mm dia 1.5 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and as per specification of NIT

Supply and delivery at site of 80mm dia CI top & bottom adopter and as per specification of NIT

Supply and delivery at site of Heavy type suitable dia MS suspension clamp along with nuts bolts and washer and as per specification of NIT

Supply and delivery at site of Three Phase actuator operated wafer type butterfly valve PN-1.0 rating of norminal dia 80 mm. and as per specification of NIT

Supply and delivery at site of 80mm dia CIDF sluice valve-1 no., Non Return Valve-1 no., CIDF 90⁰ bend-2 nos. CIDF tee- 1 no., CIDF short piece -2nos ,flange etc. and as per specification of NIT

Supply and delivery at site of Heavy type 250mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry and as per specification of NIT

Supply and delivery at site of Pressure gauge [Make- H. Guru/Febig] 102 mm. dia [0-7 kg/Sq.cm] brass cock and fitting complete [ This cost includes 15 mm. dia G.I. pipes and specials]

Supply and delivery at site of Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials.

Supply delivery at site of Depth gauge 100mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump [This cost includes 15 mm. dia G.I. pipes and specials

Earthing and lighting protection for pump house and electrical installation as per ISS and IE rules and as per technical specification of NIT

Supply delivery at site and storage of illumination arrangement like suitable size wire, switch ,switch board ,tube light fitting LED outdoor fixture complete as per specification of NIT.

Supply & delivery at sites chair,table,Celing Fan,wooden board, Kiox Box as per specification of NIT

Supply & delivery at site of suitable capacity Power correction arrangement as per Specification of NIT.(20 KVA, 225 Vp-500Vp)

Supply delivery at site and storage of Disinfection arrangement with Flow rate 100 LPH as per specification of NIT.

PART-B Installation of all items as mentioned in Sl.No.1 to 24(Part-A) including construction of Pump foundations, pipe supports, valve supports, laying of cables with necessary jointing materials, earthing arrangement of motors, starters, including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding etc. as required for complete installation as per Hydraulic standard & IE rules in compliance with specification of NIT and upto entire satisfaction of EIC.

Painting of the installation (viz. pumps,valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per NIT specifiaction & direction of EIC.

Testing & Commissioning of the entire installation i.e. Pumps, Motors,valves etc. as in PART A of (Sl no. 1 to 24) as per direction and to the entire satisfaction of E.I.C.

Operation & guarding of the pumping machinery with full satisfaction of EIC.

Supervision charges for electrical installation by licensed electricians per IE rules 1956 read with latest amendments overhead expenditures etc

Double tank chlorination arrangement of installed metering pump (Chlorine Dosing Pump)

Supply & installation at site including design and manufacturing of Alluminium composite panel [ ACP 3 mm ALUDECOR Exterior AL-33 ] LED board with 12 mm imported acrylic pasted vinyl letter with one side glassing alluminium tube of site 2.5" x 1.5" x 1.3 mm with different colour LED as per direction of EIC. The board should have in built power circuit board connected with LED lamp suitable for operating in 230 volt, 50 Hz AC supply. [ Size 5' x 3'6" ] (For, PH-I, PH-II, PH-III & PH-IV)

Supply and delivery at site of 5 meter conical flanged type GRP Street light pole with base plate at bottom, top ID-85+/- 2, bottom ID-150+/-2 including GI(EN8) Anchor bolts (4 nos.) all complete as per direction of EIC.

Fabricating module arm made up from MS for installation of the solar module and LED luminaries on supplied GRP Street Light Pole as in item no. 1.00 including single coating red lead primer and double coated aluminium painting as per direction of EIC.

Erection of 5 Mtr Single Steel tubular pole of length as given below with sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x750 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.50 mt. above ground level including 2 mm thick neat cemented finish and GI earth bolt and earthing arrangement by 8SWG GI Wire,after making drilled holes etc. on pole including filling up the excavated earth pit with shifted soil and ramming properly.

Supply and fixing of integrated Solar 15 Watt LED street Light in Aluminium Extruded enclouser IP65 with built in Mono or Poly Crystalline panel, Lithium Ferro Phospate (LiFePo4) battery, MPPT Charge Controller and PIR Sensor with Colour temperature between (5500-6500) degree K having following minium specification on top of tubular pole Solar Panel 40W peak or higher, lumen otput:120 lumen/watt, vbiewing angle:120 degree or higher, RED LED for battery low, GREEN LED for solar charging, battery capacity 12 V, 18 AH or higher, autonomy 2 days, Expected battery life 2000 cycles, in built BMS for battery safety, maintenance free operating temperature of (LiFePo4 -10 deg. to +55 deg. c, High efficiency>90%, battery charging time not more than a day, Reverse polarity protection for battery & solar panel, over charge & deep discharge protection for battery, over voltage & over current protection from solar PV module, dusk to Dawn operation, cooling air natural.BIS/MNRE/IEC approved

Add: GST @ 18%

Add: LW Cess @ 1%

H.K.DAS & CO. (BID ID -6427676)

DAS ENTERPRISE (BID ID -6425294)