NIT 313 Replacement of Pipe Poles with steel tubular poles at various locations in all section UESD Kakkar. T.S. No. 139/2025-26 (ON PARTIAL TURN KEY BASIS)

AAAC 7/3.15mm conductor for 3Φ and additional 1% (Sag, Jumpering and wastage} .

RCC Muff 2000 mm long with concrete filling material

Channel iron Iron (75X40x5 mm), ( Length-1.50Mtr+0.2Mtr)mm x1 Nos. Per Pole

Shackle Insulator (16 kN)

D-Iron (U- Clamps)made of MS Flat 50x6mm with Nut & Bolts

LT Stay Set Complete i/c stay clamp)

Stay wire 7/3.15 mm (6.00 kg. per stay set)

Stay Clamp / Full Clamp made of M.S. Flat of size (50 x 6mm).

Half Clamp made of MS Flat 50x6mm

LT Earthing Set complete in all respect

Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengths and Additional 1% (Sag and wastage)} {0.102 kg/m}

Nuts and Bolts of various sizes (Galvanised / Coated) [Preferably 16mm² or more (with flat and spring washers)]

Aluminium Paint

LT egg insulator

ERECTION OF LT LINE : Erection of LT Pole structure with Steel Tubular Pole 9 mtr. Long as per latest standard practices /specification of REC / HPSEBL : (including Digging of pit for pole, muffing of pole, erection of poles, refilling of pit & ramming , drilling of holes in pole and X-arm, fixing of X-arm, Shackle Insulators and painting of structure with Redoxide Primer & Aluminium Paint etc.Complete in all respect as per the standard practices / specifications of the REC /HPSEBL.

Erection of Stay Set (LT) as per latest standard practices /specification of REC / HPSEBLincluding digging of pit (size0.9*1.20*1.33),fixing of Stay Rod, filling and ramming of pit, nozzelling and tightening etc. complete in all respect.

Erection of LT Earthing as per latest standard practices /specification of REC / HPSEBL including digging of pit fixing of LT Earth Set, refilling the same and prov. earthing connection completein all respect.

Re sagging of Conductor, Stringing, Sagging of AAAC 7/3.15, 50mm² and binding with Insulators and fixing of jumper.

Laying of Earth wire with GI Wire 8SWG , Stringing, Sagging of and binding with Insulators.

Dismataling of LT line pipe poles (complete) along with all dismantled material retured back to the Divisional store at Jhaniara

Erection sagging of Conductor, Stringing, Sagging of charges of AAAC 7/3.15 mm 50mm² and binding with Insulators and fixing of jumper.

Add loading/unloading charges of material from Store to site & sie to store including manual carriage as directed by site incharge for complete job.

Please Enable Macros to View BoQ information