C/O Additional Accommodation for two rooms in Veternary Hospital (Dispensary Jassai ) at Atyalu Tehsil Nadaun

Amount

Excavation in foundation, trenches etcetera in all classification of soil such as pick work jumper work, pick jumper work blasting work and soft rock work in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in 15cm (fifteen centimeters)layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth within all leads and lifts as directed by the Engineer-in-charge and including entire carriage of material in all leads and lifts disposed materials to be neatly leveled. The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government .

Filling of plinth with boulder filling under floor including watering, ramming, consolidating and dressing complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government .

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, and as directed by the Engineer-in-Charge including carriage of materials. Within all leads, lifts and other incidentals. The rate including Royality, Malkana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etc. up to any thickness, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level and as directed by the Engineer-in-Charge including carriage materials of within all leads, lifts and other incidentals.The rate including Royality, Malkana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate including Royality, Malhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (one cement : six sand : twelve graded /crushed /broken stone aggregate) 40mm (forty millimeter) nominal size and curing complete excluding cost of form work in foundation and pilnth . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government .

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 330 kg (three hundred thirty) Killogram per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation footings, bases of columns etcetera and the like mass concrete complete as per HPPWD specification and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 320 Kg (three hundred twenty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landings and shelves and their supports, balconies, beams, girders, bressumers cantilevers and the like shelves and work tops etcetera in all upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 320 Kg (three hundred twenty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in stair case (except spiral stair case) in all upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain/reinforced cement concrete Grade-M-25 (M-Twenty five) nominal mix 1:1.5:3 (One cement isto one and half sand isto three graded crushed stone aggregate 20mm (Twenty millimeter) nominal size in lintel beams, girders, bressumers cantilevers and the like coping slab etcetera in all upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge excluding the cost of form work and curing complete but excluding cost of reinforcement for reinforced concrete work as per satisfaction and direction of Engineer-in-Charge, including carriage of materials up to all leads, lifts. The rates including Royality, Malkhana, Octroi, toll tax, sale tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain/reinforced cement concrete Grade-M-25 (M-Twenty five) nominal mix 1:1.5:3 (One cement isto one and half sand isto three graded crushed stone aggregate 20mm (Twenty millimeter) nominal size in columns , pillars, posts and struts etcetera in all upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge excluding the cost of form work and curing complete but excluding cost of reinforcement for reinforced concrete work as per satisfaction and direction of Engineer-in-Charge, including carriage of materials up to all leads, lifts. The rates including Royality, Malkhana, Octroi, toll tax, sale tax or any other taxes imposed by the Government.

Providing and laying TISCON ,SAIL ,TATA JINDAL, steel reinforcement for reinforced cement concrete work including bending, binding straightening and placing in position complete in all heights in any floor including cost of bending binding wire etc. including entire carriage of material in all leads and lifts The rates are inclusive octroi , royality , Malkana, toll tax, GST, sale tax or other taxes imposed by the Government . .

Brick work using Second class common burnt clay buildings bricks in super structure level upto all floor level in cement mortar 1:6 (one cement : six sand) and curing complete including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate including Royality, Malkana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings in foundation and plinth level upto all depth level in cement mortar 1:4 (one cement : four sand) and curing complete including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate including Royality, Malkana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Second class half brick work using common burnt clay building bricks in super structure above plinth level upto all heights/floor level in cement mortar 1:4 (one cement : four sand) and curing complete including carriage of materials within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate including Royality, Malkana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Second class half brick work using common burnt clay building bricks in super structure above plinth level upto all heights/floor level in cement mortar 1:4 (one cement : four sand) and curing complete including centring and shuttering complete including carriage of materials within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate including Royality, Malkana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing aluminum oxidized sliding door bolts, make of PILOT/Sheel anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkana, Royality, Octroi, toll tax or any taxes imposed by the Government. 300x16mm (three hundred into sixteen millimeters).

Providing and fixing 150x10mm (one hundred fifty into ten millimeter) aluminum oxidized tower bolts (Barrel type) make of pilot/sheel anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate inclusive of Malkana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 100x10mm (one hundred into ten millimeter) aluminum oxidized tower bolts (Barrel type) make of pilot/sheel anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate inclusive of Malkana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeters) aluminium handles make of pilot/sheel transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkana, Octroi, toll tax or any other taxes imposed by the Government.

Providing and laying kajaria Nitco make white glazed tiles 6 mm (six millimeter) thick in skirting risers of steps and dado 12 mm(twelve millimeter ) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and laying 40mm (Forty millimeters) thick Cement concrete flooring 1:2:4 (One cement : Two sand : Four graded crushed stone) aggregate 20mm (Twenty millimeters) nominal size laid in one layer finished with a floating coat of neat cement, curing complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing M.S. grills of required pattern on wooden/ PVC frames of windows etc with M.S. flats square or round bars with round headed bolts and nuts or by screws/welding plain grill including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing on wall face PVC finolex/ Diplast/ supreme 110mm (one hundred ten milimetre) dia rain water pipes of working pressure not less 4 kg/Cm square (four kilogram / centi metre square ) including filling the joints with approved adhesive complete . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing on wall face PVC finolex/ Diplast supreme 150mm dia PVC plain bend (one hundred fifty millimetre) accessories for rain water pipes having working pressure not less than 4 kg per centimeter square (Four Kilogram per centimeter square ) including filling the joints with approved adhesive complete . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing M.S holder bat clamps of approved design to C.I or S.C.I pipes embedded in and including cement concrete blocks 10x10x10cm ( ten into ten into ten centimeter ) of 1:2:4( one cement : Two sand : four graded crushed stone aggregate 20mm(twenty millimeter ) nominal size and cost of cutting holes and making good the wall etc including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government . 100mm dia for C.I pipe. ( one hundred millimeter )

Providing and laying 6mm( six millimeter) thick cement plaster to ceiling in cement mortar 1:4( one cement : Four sand )finished with floating coat of neat cement and thick upto any floor level heights including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing anodized aluminum work for door windows ventilators and partitions with extruded built up standard tubular and other sections od approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC15% fixed with rawl plugs and screws or with fixing clips or with expansion hold fastness including necessary filling up of gapes at junctions, at top bottom and sides with required PVC/ neoprene felt etc. Aluminum sections shall be smooth rust free, straight, mitred and jointed mechanically where ever required including cleats angle. aluminium snap beading for glazing/ paneling C.P brass/ stainless steel screws . all complete as per architectural drawing and the directions of Engineer-in- Charge including entire carriage of material in all leads and lifts. upto all floor levels .The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government . (i) For Doors windows and ventilators and glazed partitions frames.

Providing and fixing anodized aluminum work for door windows ventilators and partitions with extruded built up standard tubular and other sections od approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC15% fixed with rawl plugs and screws or with fixing clips or with expansion hold fastness including necessary filling up of gapes at junctions, at top bottom and sides with required PVC/ neoprene felt etc. Aluminum sections shall be smooth rust free, straight, mitred and jointed mechanically where ever required including cleats angle. aluminium snap beading for glazing/ paneling C.P brass/ stainless steel screws . all complete as per architectural drawing and the directions of Engineer-in- Charge including entire carriage of material in all leads and lifts. upto all floor levels .The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government . (ii) For shutter of doors windows and ventilators including providing and fixing hinges / pivots and making provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fitting and glazing/ penelling shall be paid separately

Providing and fixing glazing in aluminium door , windows ventilator shutters and partition etc with PVC/ neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer –in- Charge(cost of aluminium snap beading shall be paid in basic item glazing with glass panes of 4mm (four millimetre) thickness(weight not less than 10.00 kg/sqm (ten kilogramme / Sqm) including carriage of materials in all leads and lifts The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government .

15mm (fifteen millimeters) thick cement plaster in single coat on the rough side of brick concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:6 (One cement : Six sand) and curing complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals

15mm (fifteen millimeters) thick cement plaster in single coat on the fair side of brick concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:6 (One cement : Six sand) and curing complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals

White washing with lime two coat on undecorated wall surface in all floors to give an even shade including thoroughly brooming the surface to remove all dirt dust mortar dust and other foreign matter . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Distempering two coats with oil bound made of Nerolac , Berger, Asian paint washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free form mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth complete as per entire satisfaction of the Engineer-in-charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing plinth protection 50mm (Fifty millimeters) thick in cement concrete 1:3:6 (One cement : Three sand : Six graded/crushed stone aggregate) 20mm (Twenty millimeters) nominal size including finishing the top surface complete as per entire satisfaction of the Engineer-in-charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing under layer for plinth protection of 75mm (Seventy five millimeters) thick (unconsolidated) bed dry brick/stone aggregate 40mm (forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete as per entire satisfaction of the Engineer-in-charge . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and laying wall ceiling and floor galvanized mild steel tube ( medium graded tube fitting and clamps including making good the wall ceiling and floor 15mm( Fifteen milimetre) nominal bore . including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and laying in trenches galvanized mild steel medium grade tubes fittings (earth work trenches to be measured and paid for separately 15mm (Fifteen millimeter ) nominal bore including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing PVC storage tank made of sintex triple layer ( ISI marked/ Treepal layer) 500 litre ( five hundred ) litre with 40mm(forty millimeter) nominal size bore galvanized mild steel scour tube with fitting 25mm ( twenty five millimeter) nominal bore galvanized mild steel over flow pipe with fitting and mosquito proof coupling of approved design 15mm( Fifteen millimeter ) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads to size are required and outlet to be including hoisting upto any height including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing Vitreous China wash down water closet squatting pan (Indian type WC pan) size 580mm (Five hundred eighty millimeters) (earth work, bed concrete foot rest and trap to be measured and paid for separately) orrisa pattern pan No 2004 in white shade (580x440 cm ( Five hundred eighty into Four Hundred forty centimeter ) I.S.I marked I.S No 2556 of hindware/ Parryware or its equivalent complete . including carriage of material within all leads and lifts Ordinary closet or equivalent make The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing 75mm(Seventy five millimetre ) nominal size PVC D-Plast / finolex spigot and socket soil, waste and ventilating pipes ISI marked including fixing with approved adehisive etc. complete including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing C.I cover without frame for manhole for frame of internal dia metre 455x610mm(Four hundred fifty five into six hundred ten millimeter ) internal dimensions total weight of cover and frame to be not less than 23kg(twenty three kilogramme) including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 100mm one hundred millimetre) in trenches 4kg/T/cm2 (four kilogram / T/ centimeter) working pressuring upplasterzed PVC pipe (conforming for IS complete with fitting (earth work in trenches to be measured and paid for separately without side dia metre including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 110mm (one hundred ten millimetre) dia PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm(three millimetre thick bolts and nuts ISI marked complete including fixing with approved adhesive etc complete including entire carriage of material in all leads and lifts The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 110mm ( one hundred ten millimetre ) made of Paryware , Hindware , Cera dia PVC floor trap of self cleaning design complete including cost of cutting and making good the wall and floor including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Constructing man holes with RCc top slab in 1:2:4 (One cement : two sand : four graded crushed stone aggregate) 20mm (Twenty millimeters) nominal size mix foundation concrete 1:4:8 (One cement : four sand : Eight graded crushed stone aggregate) 40mm (Forty millimeters) nominal size inside plastering 15mm (Fifteen millimeters) thick with cement mortar 1:3 (One cement : three sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 mix (One cement : two sand : four graded crushed stone aggregate) 20mm (Twenty millimeters) nominal size finished smooth complete. Inside size 800x800x500mm (Eight hundred into eight hundred into five hundred millimeters) deep including cast iron cover with frame(light duty single seal pattern-I ) 455x610mm (Four hundred fifty five into six hundred ten millimeters) Internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23 kg(twenty three kilogram) and weight of frame 15kg(fifteen kilogram) with 200mm (two hundred millimetre) thick wall of brick masonry using common burnt clay building bricks in CM 1:3 ( One cement : Three Sand ) complete including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 110mm(one hundred ten millimetre) size PVC made of finolex/ Diplast / supreme ‘P’ or ‘S’ trap for water closet (squatting pan) having working pressure not less then 4kg.centi square metre ( four kilogram centi square metre) including jointing the trap with the pan and soil pipe having working pressure not less then 4kg.centi square metre ( four kilogram centi square metre) with approved adhesive complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 10.00 liter (Ten liter ) capacity PVC low level made of Parryware ,Hind ware ,Cera dual flushing cistern with a pair of brackets with fittings such as lead valve less sypon 15mm (Fifteen millimeters) nominal size PVC ball valve with polythene float PVC handle unions and coupling for connections with inlet, outlet and overflow pipes 40mm (Forty millimeters) dia PVC flush bend with cistern and closet (overflow pipe to be measured and paid for separately )complete . including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing flat back 550x400mm Parryware ,Hind ware ,Cera (five hundred fifty into four hundred millimeters) vitreous China wash basin with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same excluding fitting including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 32mm (Thirty two millimeters) dia C.P. brass waste (heavy duty ISI marked IS 8931 &8934 )for wash basin or sink complete . including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing made of Paryware , Hindware , Cera dia PVC collar ISI marked including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government 75mm ( Seventy five millimetre ) nominal size

Providing and fixing 600x450 (Six hundred into four hundred fifty) bevelled edge mirror made of Modi guard, Atul golden fist of superior glass mounted on 6mm (Six millimeters) thick AC sheet or plywood sheet and fixed to wooden plug with C.P. brass screws and washers . including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing made of Jaguar, Jal, essess C.P brass pillar tap with capstan head ( heavy duty ISI marked IS 8931 & 8934) 15mm(fifteen millimeter) dia including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing made of Jaguar, Jal ,essess C.P brass bib tap ( superior heavy ) 15mm(fifteen millimeter ) dia capstan head including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing in cement in cemnt mortar 1:3( one cement : three san) a pair of vitreous China 250mmx130mmx30mm( Two hundred fifty millimetre into one hundred thirty millimetre into thirty millimetre) foot rest for long pattern squatting pan water closet including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 32mm (Thirty two millimeters) dia PVC waste pipe for wash basin or sink including PVC check nut . including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Naresh Kumar