Civil maintenance works at BARC Staff Colony and Warehouse, Tarapur for the year 2024- 2026

Amount

Lead charges for lead exceeding 1 KM but Nost exceeding 2 KM, by mechanical transport including loading, unloading, stacking / levelling etc. (a) for soil

Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge 230mm with outside material.

Labour charges for murum filling under floors of specified thickness in layers of Nost more than 150 mm thickness including supplying required materials and consolidation etc. complete (Using murrum avilable at site)

Lead charges for lead Exceeding 1 KM but Nost exceeding 2 KM, by mechanical transport including loading, unloading, stacking /levelling etc. and as directed by Engineer-in-charge. Debris beyong 1 Km to but upto and including 2 KM

Providing and laying in position cement concrete of 1:3:6 (1cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels and as directed by the engineer.

Providing and laying in position cement concrete of 1:2:4 (1cement, 2 crushed sand, 4 graded stone aggregate of Nosminal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels and as directed by the engineer.

Providing and laying in position Cement Concrete of 1:1.5:3 at all level (1 cement,1.5 crushed sand,3 graded stone aggregate of nominal size 20mm) , including consolidation, finishing, curing etc, complete as per specifications and grawing but excluding the cost of shuttering centering and steel reinforcement.

Providing , centering ,shuttering Form work by using steel plates, timber planks for PCC and minor structures including necessary strutting, proping, without staging, supports etc and deshuttering the same after the specified time all as per drawings,specifications and as directed by the Enginner-in-charge.

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying,preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor Upto and including 32mm dia reinforcement: Using TMT bars of specified grades. TMT bars using virgin materials.

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, moNosrails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge Up to and including 300 mm Joists, 350 mm channels, and below sections manufacturered using virgin materials.

Providing and fixing precoated galvalume Roofing profiole sheets pof approved size , shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 x 55 mm ) with EPDM seal or with polymer coated J or L hooks, bolts and 8mm diameter withbitumen and G.I. limpet washers filled with white lead complete upto any pith in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-in-charge Galvalume sheet roofing 0.50 mm Thickness in single sheet .

Provding and constructing brick work in Cement mortar using standard bricks of approved class/ quality, make or brand in foundation and plinth including curing, raking out joints, simultaneous pointing below plinth level if specified, complete as per drawings, specifications and as directed by the Engineer-incharge. Brick work in C.M 1:6 using crushed sand.

Providing and constructing Half brick masonry using bricks of approved quality / class, brand/ make in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications and as directed by the Engineer-incharge but excluding reinforcement up to plinth level and as directed by engineer. (Reinforcement will be paid under relevant item)

Providing and constructing Random Rubble masonry using approved Rubble stone in foundation and plinth in C.M 1:6 (using crushed sand) including raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. complete as per drawings and specifications and as directed by EIC.

Providing Raised and cut pointing on stone with cement moratr 1:3 using crushed sand as per specifications and as directed at site by the Engineer-in-charge.

Supplying , cutting to shape and fixing specified diameter UPVC pipes as per IS 4985 in RR Masonry/ RCC walls for weep holes complete all as per drawings and as specified at site. 90 mm dia UPVC Pipes

Providing 12 mm thick Internal plastering in cement mortar 1:4 without cement punning (using crushed sand) finished smooth, including sieving of sand to required fineness,preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete

Providing 20 mm thick water proof plastering in cement mortar 1:3 (using crushed sand) finsihed smooth with a floating coat of neat cement including approved water proofing compound added @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, preparation of surface, scaffolding at all heights, curing all as per specifications, drawings and as directed at site.

Providing and laying (IPS Flooring) cement concrete flooring 1:2:4, using crushed sand 50 mm thick finished smooth to the required level, finishing with a floating coat of neat cement including cement slurry, curing, cleaning the surface neatly at the time of handing over the area complete as per specifications and drawings as directed by the Engineer in charge

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness Not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed / Anti skid floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness Nost less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge

Providing and fixing minimum 17 mm thick gang saw cut mirror polished granite (premoulded and prepolished) machine cut ZEBRA BLACK colour granite for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edge to give high gloss finish etc. complete as directed by the Engineer-incharge at all levels

Marble stone flooring with not less than 18 mm thick marble slabs over 20 mm thick base of cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement slurry rubbing and polishing complete all as per specifications, drawings and as directed by the Engineer-in-charge Using Udaipur Green marble 18 mm thick using crushed sand.

Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 Nosn-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws, 1Nos. aldrop, 1 Nos. tower bolt, 1 Nos. handle, 1 Nos. doorstop complete.

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) and as directed by EIC 1.1) extra for colour 1.2) anodized aluminium section (minimum aNosdizing thickness of 15 micron)

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) with tinted colour float glass of 5 mm thickness.

Manufacture, supply and installation of louvers made of 4 mm thick aluminium composite panels of approved make in the external vertical face and flush with the facade system for inlet of fresh air as per the design / details including all necessary aluminium (with minimum 25 micron thick aNosdisation) frames, frosted glass in louvers and fixing portion, sub frames, peripheral flashings to avoid any ingress of water inside the building with stainless steel bird wire mesh on the inside etc. complete as per details in approved shop drawing and specifications and as directed by EIC.

Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws 30 mm thick panelled door type of approved colours including the cost of ISI marked 100 mm heavy quality stainless steel butt hinges with necessary screws.

Fiber letter box including cost of all spare parts lock with three keys (one year guarantee), screws bolts and fixing other all materils disposal of existing materials to EMC (civil) stores, design and drawing approved by Engineer-in-charge.

Poviding and fixing stainless steel (SS 304 Grade) adjustable friction windows stays of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge. 355 X 19 mm

Providing and fixing IS:12817 marked stainles steel butt hinges of size 100 x 60 x 2.5mm (heavy weight) of approved make with stainless steel screws etc. complete as directed by the Engineerin-charge

Providing and fixing anosdised aluminium tower bolts of size 250 X 12 mm ISI marked of approved make, transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing aluminium aldrops of size 250 X 16 mm ISI marked aNosdised transparent or dyed to requried colour or shade with necessary screws, bolting from rear side complete as per specifications and as directed by the Engineer-in-charge

Providing and fixing anodized aluminium baby latch of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters.

Providing and fixing approved make 7 level night latch with triplicate keys including necessary screws etc in wooden doors complete all as directed at site

Providing and fixing Godrej make Ultra twin bolt locking system (model : 1CK) keys including necessary screws etc in wooden doors complete all as directed at site

Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, aNosdised transparent or dyed to req. colour or shade with necessary screws etc. complete.

Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, anosdised transparent or dyed to required. colour or shade with necessary screws etc. complete.

Providing and fixing C.P brass towel rail of approved make 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge.

Providing and fixing 25 mm S.S. curtain rods of 1.25 mm thick with two brass brackets fixied with brass screws and wooden plugs etc. wherever necessary complete.

Providing, Painting on old work (two coat) with oil bound washable distemper of approved brand and manufacturer to give an even shade including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineerin-charge

Providing and painting old walls (TWO coats) over existing cement paint surface on plain / sand face plaster & concrete surfaces with premium acrylic smooth exterior paint of approved make, required shade, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing and Painting two coats of synthetic enamel paint on Steel Surfaces of approved brand and manufacture to give an even shade without primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and fixing square mouth S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design. 150 x 100 mm size gully trap "P" type

Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 Nos 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge

Providing and fixing Chlorinated Polyvinyl chloride(CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer In Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) single socketed pipes 75 mm diameter

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) single socketed pipes 110 mm diameter

Providing , Laying , jointing, fixing and testing Heavy quality (CClass) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with exclusive use of C-Class pipe.

Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete

Providing and fixing 15 mm C.P brass pillar cock of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge.

Removing the damaged brass ball valve, providing and fixing new brass ball valves of approved make as directed by engineer - in-charge.

Providing and fixing 100 mm dia S.S. jali of approved make or as directed by engineer in charge

Removing the damaged G.M. gate valve, providing and fixing new GM gate valves of approved make with handle wheels as per IS 778.

providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge. 15 mm dia bib cock of approved type and make.

Providing and fixing C.P Brass open stop cock of Heavy Quality of specified / approved make asper specifications and as directed by the Engineer-in-charge. 15 mm n.b CP Brass open stop cock of approved make and type.

Providing and fixing C.P brass concealed stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge 15 mm n.b CP brass concealed stop cock of approved make.

Providing & fixing C.P brass 2 way Angle cock (2 Angle cock combination in single fitting) of heavy quality of approved make as per specifications and as directed by the Engineer-In-Charge.

Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brasss unions and nuts 15mm dia 600 mm long

Supply and fixing heavy quality hot and cold mixture valve of approved make includng cost of material and labour charge approved by Engineer-in-Charge.

Removing the following sizes of damaged G.I fittings from G.I pipe lines, replacing the damaged fittings with new fittings, testing for leakage etc. complete as per specifications and as directed by the Engineer-in-charge.

25 mm G.I elbow, bend, nipple, socket, tee and other G.I spare parte etc.

32 mm G.I elbow, bend, nipple, socket, tee and other G.I spare parte etc.

40 mm G.I elbow, bend, nipple, socket, tee and other G.I spare parte etc.

Providing and fixing white vitreous china flat back half stall urinal size 580x380x350 mm / 610 mm of approved make Aquaseal model with Push cock of approved make,with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed by the Engineer-incharge.

Providing and fixing Indian water closet (Orissa pan) of approved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm .

Providing and fixing white vitreous china European type Water Closet with'P'or'S'Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing ,commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge. W.C. pan in White colour with ISI marked white solid plastic seat and lid.

Providing and fixing PVC low level / high level flushing cistern 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, M.S. brackets etc. complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing vitreous China wash basin of approved make and colour with C.I. brackets,15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge. White vitreous China wash basin size 630 x450 mm and equivalent sizes wi thsingle15mmC.P.brass pillar tap.

Providing and fixing Satin finish stainless steel AISI 304 (18/8) kitchen sink of size 610 x 510 mm without drain board and bowl size 545 x 445 x 200 mm depth as per IS13983 of approved make, with C.I. brackets, fittings and stainless steel plug 40 mm including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing Heavy quality flexible PVC waste pipe of following dia. (semi rigid or flexible) of approved make for sink or wash basin including PVC waste fittings etc. complete all as per specifications and as directed by the Engineer-in-charge .32 mm dia flexible PVC (semi-rigid) waste pipe.

Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick plywood sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge.

Providing and fixing 150 X150 mm heavy quality S.S soap dish case of approved make complete all as per specifications and as directed by the Engineer-in-chargeand as directed by the Engineer-in-charge

C.P Brass Waste coupling of approved make Half threaded or Full threaded as per requirement

32 mm dia

38 mm dia

Providing, supplying and fixing health faucet with 1.00 metre long flexible tube with out concealed etc complete all as specification and approved make and as directed by the Engineer-in-charge

Providing, hoisting and installing at required elevation moulded HDPE cylindrical vertical water storage tanks of approved make of the following capacities with suitable S. M. C cover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow, providing and fixing necessary G.I Nipples ranging from 15 mm to 50 nn n.b of average150 mm length with double check nuts, washers etc. complete as directed by the Engineer-in-charge.

HDPE CYLINDRICAL vertical storage water tank 1000 lit capacity

HDPE CYLINDRICAL vertical storage water tank 2000 lit capacity

Providing and constructioning Inspection chambers of Internal size clear dimension of 900 x 600 mm in 230 thick brick masonry with cement mortar 1:4 over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed surfaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervals complete . Depth of chamber not exceeding 900 mm. Note: Excavation, soling, cast iron cover , C.I steps and any other required item will be included in this item.

Providing and constructing storm water chambers of Internal size clear dimension of 450mm x 450 mm in 230 thick brick masonry with Cement mortar 1:4 over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, outside and all exposed surfaces finished with a floating coat of neat cement, embedding the C.I frame and cover / RCC precast slab by making suitable rebate in concrete, and fixing cast iron steps if necessary at 300mm intervals complete as directed by the Engineer-in-charge. Depth of chamber not exceeding 900 mm. Note : Excavation, soling, cast iron cover, C.I steps , precast slab and any other required item will be included in this item.

Providing and laying non pressure NP2 class RCC Hume pipes of approved make, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes and as per the drawings and specifications and as directed by the Engineer-in-charge including testing of joints etc. complete.

150 mm Dia RCC Hume pipe class Np2

250 mm Dia RCC Hume pipe class Np2

300 mm Dia RCC Hume pipe class Np2

Dismantling plain cement concrete/ RCC manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge.

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge.

Demolishing Stone rubble masonry (In cement mortar) manually / by mechanical means carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below and as directed by engineer.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 25 mm and up to 40 mm

Dismantling roofing including ridges, valleys and gutter etc and stacking the material within 50 m lead and as directed by engineer G.S Sheet / FRP Sheet / AC Sheet

Dismantling G.I pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as per direction of Engineer-in-charge

Dismantling flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 100 m lead and as directed by engineer-in-charge

Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including scaffolding disposal of rubbish to the dumping ground within 100 m lead

Supplying of following material to department for day to day maintenance work by departmental persons use including all charges and as directed by the Engineer - in - charge.

Hydraulic Excavator (3D) with driver and fuel when required for department

Hire charges of Diesel Truck - 9 tonne (with POL)

Supply of cement

Supply of crushed sand

Supply of 20 mm Aggregate

Supply of 10mm Aggregate

Supply of white cement

Supply of stone dust

Supply of bricks

Supply of waterpoofing compound

Supply of white lead/ glass putty

Plaster Of Paris

Wall putty

6mm thick plywood

9mm thick plywood

12mm thick plywood

18mm thick plywood

S.S. Screws 20 mm

letter box locks with keys

Acrylic washable distemper

Synthetic enamel paint

Cement primer/ Enamel paint thinner

Fevicol Glue

Wire brush with wood handle

Soft brush (us per size )

supply of HCL Acide

Supply Costic soda in liquid

Supply of cotton hand gloves

Aluminium baby latch

M-seal

Supply of C.I./ M.S. various size brackets (size )

Supply of Shahbad stone rough 40mm thick

Supply of PVC hand gloves

M.S. Roller wheels for parking barrigate

S.S. Mesh - (mosquito net) - 0.55mm thick 144 apeture in sq. inch

80 mm dia G.I. 'C' class pipe

Supply of METRO POLE flush valve 32 mm

Supply of METRO POLE flush valve 40 mm

pad lock ( 5 liver )

Bib tap spindle

6mm thick nylon rope colour and quality approved by EIC

Chouke Remover 4"

Chouke Remover 6"

Taflon Tape

star lock

Pillar cock and bib tap washers

15 mm Float valve for over head tanks

20 mm Float valve for over head tanks

25 mm Float valve for over head tanks

Roller wheels for aluminium sliding windows/shutters

White glazed vitreous china Orissa Pattern W.C. of size 580 x 440 mm

40 mm dia PVC pipe 6kg/cm2

40 mm dia PVC pipe 6kg/cm2 parts bends, tee, coupling and other parts

Paint stainers of various colours (50ml each)

Coat hooks (hanging hook)

2 in 1 Bib cock & Angle cock

Chemical water proofing compound of No- 1 primmer MC- 76

Chemical water proofing compound of No- 1 fiil flexcoat

Supply of 40 mm aggregate

Providing service and repairing of gas and arch welding machines, G.I. threading machine, G.I. and M.S pipe cutting machine, wood cutting machine etc. complete witnh repair and replacement new spare parts, oiling, greasing and other allied work including cost of labour and materials as per direction of Engineer-in-Charges

Providing and laying a reinforcment cement concrete (RCC) bio septic tank having 10000 L capacity of 1800mm dia including two inlet and outlet two manhole with GFRP cover and vent pipe. Its made from reinforce concrete, which is fireproof and produces fewer odors. RCC bio septic tanks are readymade, easy to carry, and last longer than traditonal concrete septic tanks. They also take up less space and prevent septic tank damage.complete as per direction of Engineer-in-Charges

M/s. KHUSHBU ENTERPRISE (BID ID -3073854)