Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.1 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹66.2 L+₹18.6 L (39.2%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹68.6 L+₹21.1 L (44.3%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹69.0 L+₹21.4 L (45.1%)Rejected-Finance NEAR OLD CCS JUNGLIGHAT SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L4 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | M/s Harjas Construction & Waterproofing Co L2 | GAYATRI ENTERPRISES L1 | RS ENGINEERING WORK L3 | SKV Engineering L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each and removing to store complete all as specified and as directed by Engineer in charge | 30 | Each | 200 ₹6,000 | 200 ₹6,000 | 195 ₹5,850 Lowest | 225 ₹6,750 |
| 2.00 | Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and removing to store complete all as specified and as directed by Engineer in charge | 30 | Each | 300 ₹9,000 | 200 ₹6,000 Lowest | 310 ₹9,300 | 312 ₹9,360 |
| 3.00 | Taking down Shutters of any description n. exceeding 1.00 Sq.m each complete all as specified and as directed by Engineer in charge | 30 | Leaf | 150 ₹4,500 | 50 ₹1,500 Lowest | 155 ₹4,650 | 156 ₹4,680 |
| 4.00 | Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed by Engineer in charge | 30 | Leaf | 200 ₹6,000 | 50 ₹1,500 Lowest | 207 ₹6,210 | 208 ₹6,240 |
| 5.00 | Refixing Shutters of any description in same opening exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed by Engineer in charge | 30 | Leaf | 500 ₹15,000 | 50 ₹1,500 Lowest | 500 ₹15,000 | 520 ₹15,600 |
| 6.00 | Resecuring (or) Easing and Adjusting without taking down shutters of any description and any size complete all as specified and as directed by Engineer in charge | 50 | Leaf | 150 ₹7,500 | 100 ₹5,000 Lowest | 145 ₹7,250 | 170 ₹8,500 |
| 7.00 | S&F Plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engineer in charge | 2 | Cum | 95,000 ₹1,90,000 Lowest | 1,34,400 ₹2,68,800 | 98,305 ₹1,96,610 | 98,817 ₹1,97,634 |
| 8.00 | S & F 35 mm thick, second class hard wood, plain framed panelled shutters [any numbers of panels] with panels of timber flat on both side [feather edged] or of veneered particle board, medium density, wood particle board with commercial face veneers fixed to chowkats complete all as specified and as directed by Engineer in charge | 30 | Sqm | 4,500 ₹1,35,000 Lowest | 4,950 ₹1,48,500 | 4,657 ₹1,39,710 | 4,681 ₹1,40,430 |
| 9.00 | S & F 35 mm thick, second class hard wood Glazed/Guaged and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc size of members of shutters complete all as specified and as directed by Engineer in charge | 50 | Sqm | 4,000 ₹2,00,000 Lowest | 4,950 ₹2,47,500 | 4,139 ₹2,06,950 | 4,161 ₹2,08,050 |
| 10.00 | S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides face covered with decorative veneer with lipping /frame to match with complete all as specified and as directed by Engineer in charge | 50 | Sqm | 4,500 ₹2,25,000 Lowest | 4,600 ₹2,30,000 | 4,657 ₹2,32,850 | 4,681 ₹2,34,050 |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
4 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Minniebay, Port Blair
GE, Minniebay, Junglighat (PO), Port Blair -744103
8456- REPAIR TO JOINERY, SANITARY FITTING AND OTHER JOINERY WORK AT SRINAGAR COLONY UNDER AGE B/R II AND REPAIR / MAINT OF ROOFING ,CHAJJAS AND CEILING AT CERTAIN OTM AND MARRIED ACCN UNDER AGE B/R I OF GE MINNIEBAY PORTBLAIR
2024_MES_672508_1
8456/E8
Open Tender
Civil Works
Item Rate
270 days
GE Minniebay, Port Blair
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE Minniebay
₹89,000
23 Aug 2025
6 Sept 2024
7 Oct 2024
7 Sept 2024
4 Oct 2024
20 Sept 2024
Amount
Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each and removing to store complete all as specified and as directed by Engineer in charge
Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and removing to store complete all as specified and as directed by Engineer in charge
Taking down Shutters of any description n. exceeding 1.00 Sq.m each complete all as specified and as directed by Engineer in charge
Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed by Engineer in charge
Refixing Shutters of any description in same opening exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed by Engineer in charge
Resecuring (or) Easing and Adjusting without taking down shutters of any description and any size complete all as specified and as directed by Engineer in charge
S&F Plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engineer in charge
S & F 35 mm thick, second class hard wood, plain framed panelled shutters [any numbers of panels] with panels of timber flat on both side [feather edged] or of veneered particle board, medium density, wood particle board with commercial face veneers fixed to chowkats complete all as specified and as directed by Engineer in charge
S & F 35 mm thick, second class hard wood Glazed/Guaged and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc size of members of shutters complete all as specified and as directed by Engineer in charge
S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides face covered with decorative veneer with lipping /frame to match with complete all as specified and as directed by Engineer in charge
S & F 25 mm thick Flush shutters, solid core construction, with particle board core , commercial type on both sides face covered with decorative veneer with lipping/frame to match complete all as specified and as directed by Engineer in charge
S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet edges will be painted to match with printed sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and as directed by Engineer in charge
S&F Factory made solid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90ͦ C ) used instead of exposed portion of PVC sheet beading. having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail, & bottom rail; Panneling of colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement at site as per specification and drawing complete all as specified and as directed by Engineer in charge
S & F 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed by Engineer in charge
S & F in repair 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed by Engineer in charge
S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extended sections or cast aluminium alloy complete all as specified and as directed by Engineer in charge
S&F in repair 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed by Engineer in charge
S & F 150mm long Aluminium anodised Handle, of extruded section fabricated type complete all as specified and as directed by Engineer in charge
S & F in repair 150mm long Aluminium anodised Handle, of extruded section Fabricated type complete all as specified and as directed by Engineer in charge
S&F Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed by Engineer in charge
S&F in repair Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed by Engineer in charge
S & F Floor Door Stopper of size 140mm overall length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed by Engineer in charge
S&F repair 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and as directed by Engineer in charge
S&F Anodised Aluminium frames or shutters for doors, partitions, Windows and Ventilators and similar works with one or more rebates incl necessary fittings and fixture such as jointing cleats, glazing clips, rubber packings, screws, handles stainless steel adjustable friction stay hinges etc. as required fixed to aluminium frame complete all as specified and as directed by Engineer in charge NOTE: (i) Unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of glass, wire cloth & Decogrill etc. (ii) Glass, wire cloth & grill to be measured and paid separately.
Supply only 4mm thick, Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and as directed by Engineer in charge
Supply only Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction.
Supply only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer in charge
S&F in repair 5.5mm thick sheet glass ordinary quality in aluminum joinery in squares of area n.exc 0.50 sqm in each pane including necessary adjustements, dismantling and re-securing complete all as specified and as directed by Engineer in charge
S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer in charge
S&F in repair Aluminium anodised doors, windows and ventilators members any description for replacement of unserviceable members, Minor repair to any sections and making serviceable the same by means of adjustment, greasing, changing friction hinges if necessary etc complete all as specified and as directed by Engineer in charge Note -Glass , wire mesh etc measured seperately on respective item of schedule
S & F anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and as directed by Engineer in charge
S&F in repair for 18 mm thick MDF high quality boardings both side pre laminated with decorative colour as in kitchen cabinet/shelves/wardrobe/wall panelling fixing with necessary arrangements as per manufacturers instructions complete all as specified and as directed by Engineer in charge
M & L 100mm Extruded brass handles, fabricated type polished complete all as specified and as directed by Engineer in charge
S & F 75mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed complete all as specified and as directed by Engineer in charge
S & F Ball catches/Magnet catcher with 8mm dia steelball, and brass body and striking plate including letting in and fixed with screws complete all as specified and as directed by Engineer in charge
S&F mild steel works as in small articles such as hold fast,clamps, hooks, plain angle cleats etc bent to shape making holes etc complete all as specified and as directed by Engineer in charge
S & F Continuous (piano) hinges width of flap 40 mm (when open) ,stainless steel, bright finish or electro galvanised complete all as specified and as directed by Engineer in charge
M&L for cutting holes in PCC block walls, full thick in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 or PCC (1:2:4) type B-1as required complete all as specified and as directed by Engineer in charge
S&F in repair 25mm dia aluminum anodised best quality curtain rails with fixing brackets in both ends complete all as specified and as directed by Engineer in charge
S&F in repair decorative globes for curtain rails to be fixed at both end complete all as specified and as directed by Engineer in charge
S&F door eye (magnet eye) with 180° crystel clear lens for safe secure home fitted in pannel door /solid core with appropriate hole complete all as specified and as directed by Engineer in charge
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by Engineer in charge
S&F MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engineer in charge
S & F in repair 18-20 mm thickness Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed by Engineer in charge
M& L second class hard wood Plain fillets exc 13 sqcm and nexc 25 sqcm . square,rectangular or triangular in section, clean sawn, secured with nails or bradsbut bullnosed,splayed, chamfered or rounded on one edge or face complete all as specified and as directed by Engineer in charge
Dismantling of wall and ceiling boards (fiber, pulp , insulation etc)or insulation boards /slabs /blankets any thickness including cover fillets, grid work any description and any position complete all as specified and as directed by Engineer in charge
Supply and Fix aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid complete all as specified and directed by Engr-in-Charge.
Taking down Cement Plaster of any description on PCC block walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. Note.Rate including scaffolding at any height
M&L rendering 15mm thick in fair faces of PCC block wall or concrete surfaces in CM(1:4) finished even & fair without using extra cement all as specified and directed complete all as specified and directed by Engr-in-Charge. Note.Rate including scaffolding at any height
M&L for rendering 10 mm thick plaster in fair faces of PCC block wall or concrete surfaces in CM (1:6) finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for rendering 5mm thick ceiling plaster in CM (1:3) on concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for providing cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in coping, benching, and similar works slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed by Engr-in-Charge.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge. Make: Asian Paint Apex Suprema Ultima Note: Rate inclusive of scaffolding at any height
M&L for applying two coats of oil bound distemper over a coat of primer on newly plastered surface of wall including preparation of surface, complete all as specified and directed by Engr-in-Charge.
M&L priparing old plastered surfaces of walls and applying one coat of oil emulsion distemper over a coat of primer all as specified.
M&L for applying putty of 1 mm thickness over plastered surface of wall/ceiling to prepare the surface even and smooth complete all as specified and directed by Engr-in-Charge.
M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
Removing loose and broken concrete/ masonary surface by chiseling/ mechanically etc from the roof slab, coloumn, beam and similar structural members cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust, dirt and other foreign particle etc and removig to debries 50 Mtr from site complete all as specified and as directed by Engineer-in-Charge.
M&L for providing and applying rust remover to exposed corroded reinforcement as per manufacturers instruction over prepared reinforcement ,including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar,using wire brushes ,chiseling etc and applying one coat of anti corrosive primer over prepared reinforcement complete all as specified and as directed by Engineer-in-Charge.
M&L for reinforced deformed bars 10mm dia and over cut to length cranking bending spirally or hopping ends MS wire annealed not less than 0.9mm dia complete all as specified and as directed by Engineer-in-Charge.
M&L for drilling and fixing teflon/PVC nozzles in RCC members ,including drilling holes (drilling 12 mm dia ,40mm deep holes in structural members at the interval of 600 mm c/c in staggered manner or as directed by Engineer in charge in RCC structure elements and cleaning the holes by air blower and fixing of nozzles of 12 mm dia PVC/teflon nozzles in cleaned holes of external end of nozzles to be machined to receive outlet of grouting gun and fixing it inside the holes by applying thixotropic epoxy putty to ensure complete sealing and curing the system for minimum 12 hrs and cutting of nozzlesby chisel after completion of grouting without damaging structural elements etc complete all as specified and as directed by Engineer-in-Charge.
S&F for hard down steel wire fabric not exceeding 4 kg/sqm cut to lengths, bent to shape mild steel wire, (annealed) not less than 0.9 mm dia as in reinforcement complete all as specified and as directed by Engineer-in-Charge.
M&L for applying one coat of epoxy bonding coat of approved make as per manufacture's instruction to bind old concrete / masonary surfaces of soffit of slab, coloumn, beam and similar structural members for new gunited / cement surface complete all as specified and as directed by Engineer-in-Charge.
M&L for pressure guniting 40 mm average thickness in cement mortar 1:3 to all affected RCC structures including necessary scaffolding modyfying with mortar with polymer based resin & hardener of approved make as per manufacturer's instructions including making good complete all as specified and as directed by Engineer-in-Charge. Note: Due to rebound during the pressure application,appropriate unit weight of gunniting mix (including wastage ) shall be fixed as per manufacturer instruction and shall be considered for calculation purpose and relevant documents shall be produced regarding this before execution of work
M & L for non shrink, cementitious Micro concrete mixed with 12.5mm graded crushed stone aggregate in the ratio by weight 18kg aggregate: 25kg micro concrete respectively or as per manufacturer's instructions, as in sides and soffits of beams, jacketing of columns, roof slab and similar structural members including necessary form work for fair finished surfaces. The formwork shall be water tight to facilitate pouring of micro concrete complete all as per manufacturer's instructions complete all as specified and as directed by Engr-in-Charge.
M&L for applying curing compound on gunited surface for complete curing as per manufacturer's instructions complete all as specified and as directed by Engineer-in-Charge.
M&L for applying polymer modified cement mortar rendering 15mm average thick in CM 1:3 on guniting/ roof/ masonary wall surface duly mixing polymer modifier of approved make as per manufacturers instruction complete finished even and smooth without using extra cement all as specified and as per manufacturer's instructions complete all as specified and as directed by Engineer-in-Charge.
Supplying and applying High build hydrophobic polyurethane waterproofing coating on slab / masonary wall cold applied of spray / brush applied coating with an elongation of 550% and tensile strength of 4.5 N/mm2 as per ASTM D 412, no leakage upto 5 bars of water pressure as per DIN 1048, shore A Hardness of min. 75 as per ASTM D 2240. The system includes base preparation with one coat of epoxy primer resin and epoxy primer hardner. Apply SmartCare PU Magnum or approved equivalent in two coats to achieve an average thickness of 1.0 mm complete as per Manufacturere specifications. Note for item Nos.62 to 72 :- (i) work shall be got executed through authorised agent of manufacturer only as mentioned in list of makes and certificate in this regard shall be submitted before execution of work (ii) An amount of 2.5 % over quoted amount of item No.1 to 12 shall be retained as security deposit against structural repair for 5 years and any defects /leakage occured during guarantee period shall be rectified by contractor without any cost and also undertaking shall be submitted in non judicial Rs.100 stamp paper duly notarized for guarantee against this effect (iii) Rate inclusive of scaffolding at any height.
M/s Harjas Construction & Waterproofing Co (BID ID -3116779)
RS ENGINEERING WORK (BID ID -3114682)
SKV Engineering (BID ID -3114552)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .