ADDITION/ALTERATION TO CERTAIN SMQS AT AIR FORCE STATION MULLANPUR UNDER AGE (I) HIGHGROUND

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frame), area not exceeding 1.5 Sqm each, and removing from site as in Sch of credit, including make good the disturbed surface with PCC 1:2:4 B0 and CM 1:4 to make the surface and edges properly finished to receive the new window/door chowkhats and also removal of debris outside MOD land, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame), exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site as in Sch of credit, with and including make good the disturbed surface with PCC 1:2:4 B0 and CM 1:4 to make the surface and edges properly finished to receive the new window/door chowkhats and also removal of debris outside MOD land, complete all as specified and directed.

Taking down wooden shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and refixing in the same opening after necessary repair, easing and adusting, jointing replacement/refixing of mongries etc, complete all as specified and directed.

Resecuring or easing & adjusting without taking down Shutters of any description exceeding 1 sqm each and not exceeding 2 sqm complete all as specified and directed.

Supply and fixing factory made pressed steel frames for doors with two rebates, of size 125 mm x 60mm, made out of 1.25mm thick sheet, one shop coat primer including fixing necessary lugs, hinges, lock strike plate, etc, complete all as specified and directed.

Supply and fixing factory made pressed steel frames for doors with two rebates, of size 105 mm x 60mm, made out of 1.25mm thick sheet, one shop coat primer including fixing necessary lugs, hinges, lock strike plate, etc, complete all as specified and directed.

Supply and fixing of factory made single extruded WPC (Wood Polymer Composite) Frames/Chowkhats for solid door/ window/ Ceosetory windows & other, of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note : M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.

Supply and fixing flush shutters 35 mm thick, solid core constuction, with block board core and plywood face panels commercial face on both side complete all as specified and directed.

Supply and fixing second class hard wood 35 mm thick plain, glazed and skelton factory made shutters, open rebated and prepared divided into squares(04 Nos) with plain chamfered or rounded mitred and rebated sash bars any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutter as specified in SSR Part I, Section 8, Clause 8.24(a), kiln seasoned and chemically pressure treated , supplied and fitted to chowkats complete all as specified and and directed. Note:- Glass or Wire cloth in panels will be measured and paid separately.

Supply and fixing of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately.

Supply and fixing factory made pressed steel frames for cupboard with single rebates, of size 90 mm x 60mm, made out of 1.25mm thick sheet, one shop coat primer including fixing of necessary lugs, hinges, lock strike plate, etc, complete all as specified and directed.

Supply and fixing 18 mm/ 19 mm thick prelaminated particle board, exterior grade, prelaminated one sides with decorative choice lamination for wooden and other side balacing white lamination fixed with screws to timber frame as in cupboards, kitchen cabinet, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) complete all as specified and directed

Supply and fixing aluminium anodised, Hasp and staple of size 100mm, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing stainless steel magnetic door catcher Magnet of size 50 x 15mm fixed with screw to shelf/sides wall and shutter complete all as specified and directed.

Supply and fixing factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolt to each shutter, steel handle and without glazing bars, including flat iron 12x3mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

Supply and fixing factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolt to each shutter, steel handle and with glazing bars, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

Supply and Fixing MS Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

Supply and Fixing, mild steel 300mm long, ordinary rat tail rod pattern MS door springs including roller and roller plate, complete all specified and directed.

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.

Supply and fixing in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, including replacement of damaged wooden bedding with and including two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fixing plain sheet glass 4 mm thick, ordinary quality, not exceeding 0.50 Sqm in each pane, and glazing with oil putty and securing pins, complete all as specified and directed.

Supply and Fix 3.0 mm thick frosted glass, pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins, complete all as specified and directed.

Supply and Fix 100mm stainless steel medium weight butt hinges, with stainles steel hinge pin, anodised & fixed to WPC/PVC door using stainless steel screws complete all as specified and directed.

Supply and fixing stainless steel floor door stopper doubled leged with rubber fixed to all type of wooden or wpc/pvc door complete all as specified and as directed.

Supply and fixing, 150 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.

Supply and fixing 200 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing 150 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing Aluminium alloy, anodised, sliding door bolts 250 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.

Supply and fixing Door seal strip with plastic beading, complete all as specified and directed.

Material and labour for providing PCC 1:3:6 type C0 using 12.50 mm graded crushed stone aggregates as in filling of pressed steel chowkhats, cill, step and for inserting hold fasts etc and similar work, complete, all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over and including a coat of pink primer, on new wooden surfaces over 10cm width or girth, including preparation of wooden surface, complete all as specified and directed.

Material and labour, applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed.

Dismantling wrought or mild steel work of any description not otherwise provided for complete as specified and directed.

Supply and fix roof tusses, purlins, rails and fasterings and heavy bracket framing(beam, tee angle, channel of flat sections) of grade Fe-410 W(GdeE-250) including distance pieces, cleats etc complete all as specified and directed.

Fixing only of roof tusses, purlins from mild steel obtained from dismanteled MS work after necessary cutting/welding complete all as specifed and as directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Supply and Fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and Labour for Cutting chases not exc 10 cm girth and depth as required for inserting galvalume aluminium zince coating corrugated steel into brick walls, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good to facing and pointing in CM 1:3 to ends or edges complete all as specified and as directed.

Material and labour for PCC 1:2:4, B0, using 12.5mm crushed aggregate as in roof kerb or mud stop, rounded or chamfered complete all as specifed and as directed.

Material and labour for mild steel as in framed work of doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing similar work conforming to Fe-290 Grade E-165, complete all as specified and directed.

Material and Labour for Cutting holes in brick wall built in cement mortar for inserting holdfasts, depth of embeded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick but not exc one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Material and labour for mild steel, plain, black sheet of 1.25mm thickness in wall cladding, steel gates and similar works, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, staging etc and removal of rubbish outside MOD land, complete all as specified and directed.

Material and labour for brickwork with using subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.

Material and labour, brickwork with using retrieved subclass 'B' old size bricks, obtained from demoliton/dismantling straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), except bricks, complete all as specified and directed. Note : Old serviceable bricks retrieved from demolition vide srl item No 45 here-in-before shall be reused after proper cleaning & washing etc.

Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6), on brick/concrete surfaces of walls, finished even smooth without using extra cement, complete all as specified and directed.

Material and Labour for 15 mm thick rendering in CM 1:4 on brick /concrete surface wall finished even smooth without using extra cement, complete all as specified and directed.

Material and Labour for rendering (in patch work of square or rectangular shape area not exceeding 3 sqm) 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished the surface even and smooth (without using extra cement) to match the existing surface incl taking down (broken/weak) plastered surfaces complete all as specified and directed.

Material and Labour for preparation and applying two coats of cement base paint over a coat of alkali resistance priming paint on newly plastered surfaces of walls complete all as specified and as directed.

Material and Labour for preparation of new decorated plastered surfaces of walls by applying two coat of oil bound distemper (Ist quality) with a coat of primer, complete all as specified and directed

Material and Labour for Preparation of old plastered or unplastered surfaces of wall by brooming down with steel brushing, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spot etc and applying two coats of white wash on wall , complete all as specified and directed.

Material and Labour for Preparation of old plastered or unplastered surfaces of Ceiling by brooming down with steel brushing, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spot etc and applying two coat of white wash on Ceiling, complete all as specified and directed.

Material and labour for preparation of old decorated wall surfaces by brooming down or steel wire brushing and using sand paper scraping down smoke shoot moulds mass and efflorescent salts and trading oil and greasy spots etc i.e leveling/edging the disturbed places/edges using necessary filling of Birla/JK wall care putty to obtain smooth regular/even finish and applying one coat of Ist quality Oil Bound Distemper, complete all as specified and directed.

Material and labour for Preparation of old plastered or unplastered surfaces of wall by brooming down with steel brushing, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spot etc and applying two coat of Cement Base Paint on wall, complete all as specified and directed.

M&L for for complete removal of existing treatment of wall and preparing surfaces by applying plaster of paris putty of 1mm thickness over plaster surface to make surfaces smooth and applying two or more coats of 100 % premium emulsion paint having VOC less than 50 Gms/ ltr and UV resistance as as per IS 15489-2004, Alkali and Fungal resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 ltr/ 10 Sqm over and including priming coat of exterior primer applied at 0.9 litres / 10 Sqm complete all as specified and directed

Material and labour for preparation of old wooden surfaces over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for preparation of old steel surfaces over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land, including preparation of demolished surface area to receive backing coat/bedding layer for tiles, complete all as specified and directed.

Material and labour for First quality, glazed designer pattern, joint free ceramic coloured tiles, 6-7mm thick, of size 450mm x 350mm or 450mm x 300 mm fixed in pattern as directed (combination of dark/light colour with border), on vertical surface such as in skirting, dados, risers to steps or walls, etc., set and jointed in neat cement slurry @ 3Kg/Sqm, and including pointing in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 10 mm thick rendering in CM (1:3),complete all as specified and directed.

Material and labour for first quality Non Skid joint free ceramic coloured tiles 7 to 8mm thick, (square/rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, as in floors etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 15mm thick screed bed/bedding layer in CM (1:4), complete all as specified and directed.

Material and labour for first quality Non Skid joint free ceramic coloured tiles 7 to 8mm thick, (square/rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 10mm thick screed bed/bedding layer in CM (1:4), complete all as specified and directed.

Material and labour for first quality Non Skid joint free ceramic coloured tiles 7 to 8mm thick, (square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 15mm thick screed bed/bedding layer in CM (1:4), complete all as specified and directed.

Material and Labour for Machine cut Kota stone slab, 18mm to 20 mm thick as in flooring, laid over and including cement screed bed 15mm thick in cement mortar (1:6), and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and polishing (granite finish polish) complete, all as specified & directed.

Material and Labour for machine cut kota stone slab as in skirting 18-20mm thick over and including 10 mm thick rendering in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing polishing etc complete all as specified and directed.

Material and labour for 20mm thick Granite work, machine cut, (table rubbed and polished) as on cooking platforms, counter-slabs, window cills, steps and like, set in neat grey cement slurry @3Kg/Sqm, laid over and including 15mm thick bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including cutting for counter WHB, moulding the corners/edges and making holes for cooking gas, grinding & polishing, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for including removal of debries out of defence land and stacking of scrap iron complete all as specified and directed.

Material and labour for Reinforced Cement Concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs, lintels and in shelves and the like, complete all as specified and directed. Note: Reinforcement steel bars and form work shall be measured and paid separately.

Material and Labour for mild steel TMT bars 8 mm dia and over upto 10 mm dia cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Material and Labour for mild steel TMT bars 5 mm dia and over and including 10 mm dia cut to length, bent to shape required, including cranking, bending sprially for hooping for in stirrups, spacers and binders and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Formwork to sides & soffits of RCC cooking slab, lintels, cantilevers, shelves including supports, overhangs, etc.also splays between floors and beams, etc. complete all as specified and directed.

Demolition and breaking up drain pipes upto 110 mm bore (PVC/Salt glazed ware, AC or Reinforced concrete) set in cement mortar fixed in any postion complete all as specified and directed.

Supply and fixing 110 mm dia bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, fixed to wall, complete all as specified and directed.

Supply and fixed 75mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in trenches or in floors, 75mm bore including necessary excavation, demolition of PCC and return filling etc complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) bends any radius, fixed to pipes with adhesive, complete all as specified and directed.

Supply and fixing in repair PVC (SWR) floor trap plain 75mm with grating including jointing with solvent cement complete all as specified and directed.

Supply and Fixing PVC 110 mm bore (SWR), junction single, (Single T) equal or unequal with access door complete all as specified and directed.

Supply and Fixing PVC 110/75 mm bore (SWR) reducers complete all as specified and directed.

Supply and Fix 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and Fix 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

Supply and Fix 75 mm PVC (SWR) vent cowl complete all as specified & directed.

Supply and Fix PVC 75 mm bore (SWR), junction single, (Single T) equal or unequal with access door complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 n exc 500ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including taking down float valve and refixing etc complete as specified and as directed.

Supply and fixing/hoisting in repair, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500 litres capacity ‘Triple layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, including dismantling existing water tank of size exceeding 250 litre but not exceeding 500 litre capacity for credit complete all as specified and directed.

Supply and fixing in repair 20 mm bore Gun metal, globe or gate valve,with iron wheel head, screwed both ends for iron pipes complete as specified and directed.

Supply and Fix in repair 20 mm ball valves (min wt 210 gms) high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed fittings, complete all as specified and directed.

Taking up or down existing steel water tubing and connections, 15mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.

Taking up or down existing steel water tubing and connections, 20 mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.

Fixing only, old steel water tubing, 15mm bore pipe, with all fitings in new or old position (walls, ceiling, floors etc), complete all as specified and directed. Note : Old steel tubing shall be fixed after proper checking, cleaning washing, bleaching etc.

Fixing only, old steel water tubing, 20 mm bore pipe, with all fitings in new or old position (walls, ceiling, floors etc), complete all as specified and directed. Note : Old steel tubing shall be fixed after proper checking, cleaning washing, bleaching etc.

Supply and fixing galvanized steel water tubes, 15mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.

Supply and fixing galvanized steel water tubes, 20mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.

Supply and fixing in repairs Vitreous china wash hand basin, flat back, size 550mm x 400mm, including brackets and cutting for and pinning in ends of brackets or erecting stand, complete including waste coupling of PTMT (half or full threaded) (Minimum weight 32-45 gms), PVC waste pipe, brackets , complete all as specified and directed.

Supply and fixing in repair Vitreous China wash down water closet pan (pedestal pattern), (excluding fixing flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, Pedestal pan and trap also including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc, seat and cover for pedestal pan taking down old and removal of debris outside MOD land, complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet squatt pan, Indian type (Orissa pattern), of size 580mmx440mm, white with integral foot rests (excluding flushing cistern and flushing pipe but including CI ‘P’/’S’ trap), set in & jointed with appropriate adhesive/mortar including embedding in concrete and taking down old and removal of debris outside MOD land, complete all as specified and directed.

Supply and fixing 10 litre capacity virgin polypropylene (PVC) low level flushing cistern, ISI marked, white or coloured, valve less symphonic action type, with inlet, ball valve, float and handle, complete including PVC bend/ flush pipe, brackets and making all connections, fixed as in repairs and removal of old from site to store for reuse or credit, complete all as specified and directed.

Supply and fixing in repairs bib taps longbody, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, including removal of old to store for reuse or for credit, complete all as specified and directed. Make: MARC/ESS ESS/JAINKO/PRAYAG

Supply and fixing in repairs pillar tap, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts, screwed for iron pipe 15mm bore dia, complete all as specified and directed.

Supply and fixing in repairs angle valve, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, including removal of old to store for reuse or for credit, complete all as specified and directed.

Supply and fixing in repair wall mixer with L Bend (provision for over head shower), cast copper alloy, chromium plated for mixing hot and cold water, screwed down to 15mm dia bore iron pipe complete all as specified and as directed. Make- Prayag Cat Part No 7375N or equivalent approved make.

Supply and Fixing in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory, with plug, wast pipe, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each washers, including cantilever cast iron brackets, connecting union etc, overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing MS chrouminum plated round curtain rod 25 mm dia with and incl decorative rounded funnals on either end and provide a visualy balanced appreance incls bracket fixed to wall with stainless steel screw and pvc rawal plug anchors complete all as specifed and as directed.

Dismantling brick tiles or terracing tiles, single layer on roof including segregating and stacking serviceable brick tiles and removal of unserviceable brick tiles / brick bats and rubbish outside defence land, complete all as specified and directed.

Demolition of un reinforced cement concrete of any description or as roof padding and covering concrete with app membrane roof treatment and in any position not otherwise specifically provided for and remove all the debris out of MoD land complete all as specified and as directed

Material and Labour for cutting out cracks to 'V'-section in existing RCC roofs or terracing, cleaning out , wetting, and applying Pidlite Dr Fixit PU sealant or equivalent, complete all as specified and directed.

Material and labour, roughing surface of old concrete slabs by wire brush sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3.00 Kg/Sqm on roof surface, removal of rubbish off the premises upto a distance not exceeding 50metres, complete all as specified and directed.

Material and Labour plain cement concrete (1:2:4), type B-1 (using 20 mm graded crushed stone aggregates) as in roof kerb, roof pading and like, including water proofing compound as per manufacturers instruction @3% of cement weight, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

APPLICATION OF LIQUID WATERPROOFING MEMBRANE: (a) Material & Labour for Providing & applying Bostik Boscocrete Primer @ 200 ml per sqmt and then applying hand applied non-sag and high consistency waterproofing membrane of Bostik Block P530 Boscoseal PUD in two coats of single component water based highly elastomeric & tough polyurethane waterproofing membrane. The consumption for 1.2mm thick membrane DFT shall be 2 kg/Sqm/2 coats, all complete as per the manufacturers specification. PU waterproofing membrane must meet the following parameters: Adhesion to Concrete: >1 N/sq.mm, Elongation: > 300%, DFT min 1.2mm, Tensile Strength: ≥ 2.0 MPa, Water permeability(BS EN-12390 at 5 bar, 72H): Nil, Accelerated weathering (ASTM G 53): Pass 2000 hours, Solid content: > 70%, Root Resistance, Reaction to fire: Non-flammable. (b) The groove shall be made of approx 20x20mm on the vertical areas on the parapet walls or on pedestals before the termination of waterproofing membrane at the height of 300mm above the FFL. The Waterproofing membrane shall be terminated inside the groove and then fill the groove with BOSTIK SEAL 'N' FLEX ONE PLUS P590, single component PU sealant. c) The geotextile membrane of 200gsm shall be placed on the cure waterproofing membrane with an overlap of 50mm to provide cushioning & protection of waterproofing membrane before the protection screed bed and brick tile layer. Complete all as specified by the manufacturer instruction, work executed in supervison or by the authorized applicator all as directed by Engr-in-charge. Note: (i)Contractor may use material of make (as mentioned below) other than Bostik but it shall meet all the above specification. (ii) Bosktik, Asian Paints, Pidilite Dr fixit, Berger, Dulux, Nerolac. Make/Sample shall be duly approved by Accepting officer.

Material and Labour, 40mm thick brick tiles laid on and including 15mm thick cement screed bed in CM (1:6) using grey cement and grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement laid on concrete roof, complete all specified and directed.

All as per serial item No 111 here-in-before (but except brick tiles), complete all as specified and directed. Note : (i) Old serviceable ties as obtained from Serial item No 105 here-in-before shall be reused. (ii) The cost of cleaning and washing of brick tiles for re-use, shall be deemed to be included in the unit rate quoted by the tenderer.

Supply only liquid waterproofing compound.

Supply and fixing in repair corner glass shelf of radius 300 mm including 2 Nos metallic holding brackits, railing etc i.e complete assembly, fixed with PVC rawl Plugs and wooden screws duly approved by accepting officer complete all as specified and as directed.

Supply and Fix Soap Dish brass chromium plated fancy type, approximate size 160x160x90 mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and Fix health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 125 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

Supply and Fix PVC (SWR) gully trap 125/110 mm with grating, setting and jointing with solvent cement complete all as specified and directed.

Supply and Fix in repair 100mm chromium plated overhead shower ABS with brass arm 225mm and flange complete all as specified and directed

Supply and fix kitchen plate rack ofstainless steel 1 mm thick with plug washer, of size 900x900x250 m, including fixing of all accessories complete all as specified and directed.

Material and Labour for 75 mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate), finished even and smooth without using extra cement.as in plinth protection including joints filling complete all as specified and directed.

Material and Labour for anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.

Material and Labour for anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart incl drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed

Taking down carefully with battens/ PVC surface/ concealed conduit unserviceable copper/ aluminium point wiring (light, fan, socket) complete including fittings such as switches, ceiling roses, pendants, socket etc. and removing unserviceable material from site and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

Material and labour for point wiring with two single core multi stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed FRLS colour code cable of 1100 volts grade drawn through and including non metalic rigid PVC conduit medium duty of suitable size not less than 20 mm dia with all standard fittings such as Tee junction, bends etc, concealed in wall/fixed on ceiling including M.S. sunken boxes of suitable size made of 1.6mm thick MS sheet duly painted with anticorrosive paint, for housing switches, fan regulators etc. with PVC cover sheet 3mm thick (Make : Hylam, Plaza, Havells, Kalinga) including 1.5 Sqmm (nominal area) multi stranded copper conductor PVC insulated unsheathed FRLS colour code cable of 1100volts grade for earth continuity, as for one light/exhaust fan or fan point (through regulator), controlled by one switch, complete all as specified and directed. Note(s) : (i) Rate quoted shall be deemed to include cutting chases for concealing conduit and making good in cement mortar (1:4) or PCC (1:2:4) as required and finishing as per existing finishes. (ii) Switches and fan regulator etc., shall be measured and paid separately.

All as per item No. 125 here-in-before but point wiring for one 5Amps socket outlet point on independent board controlled by one single pole, one way switch complete all as specified and directed.

All as per item No. 125 here-in-before but point wiring for one 5Amps socket outlet point on the same board controlled by one single pole, one way switch complete all as specified and directed.

All as per item No. 125 here-in-before but point wiring for one 2 way light point controlled by one two pole, 2 way switch complete all as specified and directed.

All as per item No. 125 here-in-before but point wiring using 2.5 sqmm as main wire & 2.5Sqmm as continous earth wire, for one 15Amps socket outlet point on independent board controlled by one single pole, one way switch complete all as specified and directed.

Supply and fix in replacement Switch piano, flush type, single pole, one way, 5 Amp, 230volts complete all as specified and directed.

Supply and fix in replacement Switch piano, flush type, single pole, one way, 15 Amp 230volts complete all as specified and directed.

Supply and fix in replacement Socket outlet multipurpose 3 pin, 5 Amp and 2 pin 5 Amp, flush type, complete all as specified and directed.

Supply and fix in replacement Socket outlet multipurpose 3 pin 5 Amp & 15 Amp, flush type, complete all as specified and directed.

Supply and fix in replacement Switch piano, flush type, two pole, two way, 5 Amp, 230volts complete all as specified and directed.

Supply and fix in replacement Ceiling rose, two to three terminals, PVC/ isolated body, complete all as specified and directed.

Supply and fix in replacement Fan regulator electronic, socket type, suitable for 1200mm /1400mm sweep ceiling fan, with and including provision of PVC flexible cable of size 1sqmm copper conductor as required, complete all as specified and directed.

Supply and fixing in replacement LED Decorative box type batten fitting 1x20 W, prewired suitable for retrofit LED tubes, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1. Sq. mm from ceiling rose to connector block, complete all as specified and directed.

Supply and fixing in replacement LED Decorative box type batten fitting 1x9 W, prewired suitable for retrofit LED tubes, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1. Sq. mm from ceiling rose to connector block, complete all as specified and directed.

Supply and fixing in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size omplete all as specified and directed.

Supply and fix in repair lamp holder complete as specified and directed.

Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers complete all as specified and directed. Note: Old exhaust fans will be deposited to the MES.

Supply and fix in repair bell push flush type one way complete all as specified and directed.

Supply and fix in repair bell ding dong complete all as specified and directed.

Taking down carefully ceiling fan of any size and make for reuse at site or carrying to the store complete all as specified and directed.

Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Supply and fix Sheet metal distribution board SPN, with double door,8 way, 220 volt with 200 Amps rated bus bar & IP 54 protection, including taking out old unserviceable complete all as specified and directed.

Supply and fix in repair RCBO 20A Amp, 220 Volt,double pole 100 mA for protection against earth fault,overload and short circuit complete all as specified and directed.

Supply and fix in repair MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA, 'B' curve, complete all as specified and directed.

Material and labour for Sub Main Wiring (in replacement) with two single core 6 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including PVC conduit of suitable size with and including one run of continuous multi stranded copper conductor 6 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note(s): (i) Two runs of 6 Sqmm main cable + one run of 6 Sqmm cable for earth continuity and PVC conduit shall be measured as one unit/one Running Metre.

Material and labour for Sub Main Wiring (in replacement) with two single core 4 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including PVC conduit of suitable size with and including one run of continuous multi stranded copper conductor 4 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note(s): (i) Two runs of 4 Sqmm main cable + one run of 4 Sqmm cable for earth continuity and PVC conduit shall be measured as one unit/one Running Metre.

Material and Labour Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

Supply and fix MS sheet 2mm thick meter box for housing of 1nos of electric meter of size 450mm x450mm x 160mm dully powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer inside and front openable type with aprons for cable entry with double door shutter and locking arragements complete all as spd and directed.complete all as specified and directed

Supply and fixing in replacement Load line TPN vertical distribution board 4 Way double door dust protected powder coated inclusive of busbar, neutral link, blanking plates and having provision of MCCB 4 Pole uto 100 Amps as incomer and MCBs SP/TP as outgoing as per IS having IP-43 protection, complete all as specified and directed.

Supply and fix in replacement MCCB 40 amp 4 pole 16 KA 415 volt adjustable complete all as specified and directed.

Supply and fix in repair sheet metal enclosure single pole and neutral with a two pin socket and earth plug complete with one MCB single pole and 240V, 20 Amp ‘B’ curve, 10 kA, old unserviceable complete all as specified and directed .

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 5 of SSR-2009 (Part-I) complete all as specified and directed.

Taking out / down old existing LT 1100 volt grade cables, size 3.5x35Sqmm, aluminium conductor 2core, XLPE/ PLCA/ PVC, armoured, laid in trenches, including bricks for protection, sand cushioning and stacking, removal to store for re-use or for credit, complete all as specified and directed Note : Excavation ,returning refilling,sand ,bricks shall be measured and paid for separately

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated and armoured, heavy duty, electric power cable, cross sectional area 35Sqmm 3.5 core aluminum conductor 1100volts grade under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: Returning filling & removal of earth, sand cushioning and bricks for protection of cable shall be measured and paid separately.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying/taking out of cables and foundation of poles etc. and getting out, complete all as specified and directed.

Returning, filling in trenches (soil), including spreading, leveling and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.

Material and labour, sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Material and labour, locally available, sub class `B’ bricks (old size), laid flat and dry perpendicular to the direction of cable adjacent to each other, in trenches over the cable for protection, complete all as specified and directed.

Note: The total amount shall subject to adjustment of credit of Rs 53945.00 for old Materials as per Schedule of Credit

Satyadev Builders (BID ID -3447082)