Repairing of link road chilsra shamshabad road to husainpur trai

Earth work in cutting or in embankment in ordinery soil excavation to be done form of regular pits not exceeding ½ m. in depth and work embankment to be in 20 cm. layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m. lift and 30 m. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30 m. direction as directed by the Engineer-in-charge(S.I. N0- 253a)

Providing, laying , spreading and compacting 22.4-53 mm stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness, hand packing rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber applying brooming stone screening/binding materials to fill up the interstices of coarse aggregate watering and compacting to the required density grading 2 as per Technical specification clause 405.

Providing and applying tack coat with Bitumen VG-10 at the rate of @ 0.30 Kg on prepared bituminous. surface cleaned with Hydraulic broom as per Technical specification clause.503

Providing and laying and rolling of open graded premix carpet 20 mm thickness composed of 13.2 mm 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant laying and rolling with a three wheel 80-100 KN static roller capacity finished to required level and grades to be followed by seal coat of either type A or type B or type C as per Technical specification clause 508.

Providing and applying seal coat sealing the voids in a bituminous surface laid to the specified level grade and cross fall using Type C as per Technical Specification clause 510

Providing and fixing of reflective sign board with 1.6 mm thick m.s.sheet coverd with 50x50x6 mm angle iron around the plate on M.S pole 100 mm dia with wall thickness of 7.10 mm weight 20 kg per meter and painting & writting latter of bord as per drawing.

Providing and laying in position cement concrete 1:1.5:3 (1 cement : 2 corse sand :4 graded stone aggregate 20 mm (nominal size) including all material labour T&P etc completion of work. Ch-05 sn-20

Supply and laying of 125 micron plastic sheet as per SI No. 28(53) chapter 1

Providing and fixing in 6 mm thick A.C. sheet 14 cm deep in joint at the time of laying floor including supply of labour , material complete etc.

Maintenance of bituminous surface road and gravel or WBm road including filling pot holes and patch repair etc.restoration of rain cuts and dressing of side slop standing tree at adjacent to road wherever cutting of branches of tree, shurb and trimming of grass and weeds etc mentioned in GO No. 55 12022/187/23-9-2022-02 Nabard / 2021 Dt 28.04.20022 & Enc lettere no 14 BDD-1 (NH)/40 MT-11/ 2024dated 03.01.2024 subjected to approval from Govt. Maintence of Ist year after completion of work @ Zero % of total work amount of Maintainance of first Year (@ 0.00% of Total Work Amount of PC Area)