SPECIAL REPAIR TO BLDG NO T-133, T-105, T-17 AND PROVN OF TOILET BLOCKS INCLUDING CERTAIN MINOR AND REVENUE WORK UNDER AGE BR-II OF GE (WEST) PATHANKOT

Amount

Taking down chowkatts or frames (without taking off shutters from frame)exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed .

Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed .

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and removing from site complete all as specified and directed.

M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate and tarring to back side of the frame etc complete all as specified and directed.

M &L pressed steel frames for doors with one or more rebates inclusing necessary fixing lugs, hinges, lock strike plate etc complete with profile size 105 x 60 mm, and tarring to back side of the frame complete all as specified and directed.

Supply & fixing 30mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed.

S&F 2nd class hard wood glazed and sketon door shutter 35 mm thick open rebated and prepared to receive glass/gauze (Without sash bars) divided into square with plain, chemfered or rounded, mitred and rebated sash bars the size of menbers of shutters as specified in SSR Part-I section 8 Clause 8.24 (a) complete all as specified and directed

Supply & fixing solid PVC door frame of size50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening as per specification & drawing complete all as specified & directed.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togather with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified and directed.

Supply & fixing butt hinges, 100 mm long of medium weight, cold rolled mild steel and fixed, complete all as specified & directed.

Supply & fixing of 140 mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of 200 mm long and 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Supply & fixing 125 mm Aluminium handles, cast type, anodised fixed complete all as specified and directed.

Supply & fixing Mild steel 300mm ordinary rat tail rod pattern spring including roller plate complete all as specified and directed.

S&F in repair steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills, glazing (3mm thick ordinary glass) , guaging (wire mesh nominal dia of wire 0.56mm and average width of aperture 1.14mm) and two coat synthetic enamel paint over and including a coat of red oxide primer all as per drg No CEPZ/TD/245/01 Sh 1/1, CEPZ-TD/246/01 Sheet 1/2 and Sheet 2/2 complete all as specified and directed.

M&L for repairing of old steel windows by welding drilling out old bolts or set screws as required. including repairing for handle, pegstay, etc to make window in serviceable condition complete all as specified and directed.

Supply & fixing Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed .

M&L Preparation of new wooden surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M&L Preparation of new steel surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including demolition/Taking down of old sheets of any description complete all as specified and directed.

M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in ridge as specified including demolition/taking down of old sheets of any description complete all as specified and directed.

Dismantling timber scantling 40 Sq cm and over in section, in any position framed work complete all as specified and directed.

S & F of mild steel angles/rectangular hollow section/steel tubular roof trusses (framed), purlines and fastening including distance pieces etc. complete all as specified and directed.

S&F of Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc FE 290 (Gde E-165) complete all as specified and directed.

Demolition of brick work built in cement morter including all quoins, arches, pillars etc, complete all as specified and directed.

M&L for Brick work using sub class 'B' bricks straight or curved on Plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description complete all as specified and directed.

Materials & labour for prepration of newely plastered surface and finishing the surfaces of wall with one coat of wall care putty of 1mm thick and applying two coat of Oil Bound distemper complete all as specified & directed.

Materials & labour for complete removal of existing treatmemt and finishing the surfaces of wall with 01mm thick wall care putty and applying two coat of Oil Bound distemper complete all as specified & directed.

M& L for Complete removing existing treatment & applying one Coat of Cement Primer of any colour and two coats of cement base paint complete all as specified & directed.

M&L for Washing, rubbing down and stopping of distempered and painted surfaces of wall and applying three coat of white wash evenly complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete all as specified and directed.

M&L for 25mm thick Cement concrete in sub base for receiving floor tiles and mass concrete using Type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed .

M&L for Non Skid ceramic tiles 8 to 10mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,(600mm x600mmx 8 to 10 mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement joint free non skid tiles.to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match to shade of the slab including rubbing and mirror polishing including 20 mm screed bed in CM 1:6, complete all as specified or as directed.

M & L for machine cut kota stone slab on wall for skirting/dado, 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match to shade of the slab including rubbing and mirror polishing, including 10 mm thick rendering in CM 1:4 complete all as specified or as directed.

M&L for cement concrete type B-1 (1:2:4) using 20mm graded broken stone agg as coping, benching, cills, lintels up to 1.50 mtr clear span, filling around hold fast , fitting in chowkats, apex stone, bed plates, kerbs etc complete all as specified and directed. Note: Rates includes formwork but excluding reinforcement.

Dismantling ceiling board of insulation boards etc any thickness including cover filter complete all as specified and directed.

S & F for suspended false ceiling system using chicago metallic (E grid)exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) complete all as specified and directed.

All as per srl item no 41.00 here-in-before but except ceiling board. Note: Old Serviceable ceiling board of any thickness/type retrieved from dismantling shall be fixed on new grid .

S&F in repair 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the existing suspended false ceiling grid system,grid size 600mm X 600mm complete all as specified and directed.

Demolition of existing roof treatment of any description such as worn-out tar felt, debris, mortar of any description & any thickness, surface cleaning of all foreign material such as fungus, moss, dust etc. by wire brushing and dusting including disposal of debris out of MoD land then surface levelled with a layer of 20 mm thick screed bed in CM 1:4 including mixed with water proofing admixture as per manufacturer's instructions and ensure water does not stand anywhere after Sprinkle water on the roof surface including Applying roof treatment on top of roof with APP modified membrane with non–woven polyster reinforcement/mat (centre core) with thermal insulation with white mineral gravel finish on upper side of weight not less than 3.5 Kg/Sqm & thickness not less than 3mm, laid by torch application method with overlap 100mm on length side and 100mm on the width side as per manufacturer’s instructions over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 0.30 Litre/Sqm complete all as specified. (Note:- WPC shall be measured and paid separately) Note:- (a)Water proofing treatment shall be provided with APP modified membrane on plastered surface as per manufacturer’s instructions and under strict supervision of manufacturer technical representative.

M&L for 80mm thick PCC coloured tile (interlocking type) over and including 50 mm thick sand cushioning, interlocking tiles jointd filled with sand and campacted with mechanical plate vibrator including 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

S&F in repair 15mm Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply & fixing in repair 15mm Fancy type bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fixing in repair vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets complete all as specified & directed.

Supply & fixing in repair angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

S&F in repair stop valves (ISI marked), 15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply & fixing of rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) triple layered ISI marked hoisted and fixed in position with all fittings all as specified including dismantling existing water tanks complete all as specified & directed.

Supply & fixing in repair PVC low level flushing cistern of10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Cutting chase, pining in making good to facings where required and pointing in cement mortar (1:3) to ends, cutting chases for concealed water tubing for concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed.

Supply, laying and testing of 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking down old pipe complete all as specified & directed.

Supply, laying and testing of 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking down old pipe complete all as specified & directed.

Supply & fixing of PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply & fixing PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

Supply & fixing in repairs vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with, integral foot rest including ‘P’ or ‘S’ trap, lime concrete bedding and making good floor as per existing complete all as specified and directed.

Supply & fixing in repairs vitreous china wash down water closet Pedestal pattern white including plastic seat cover white and M.S, CP or aluminium hinging device complete all as specified & directed.

Supply & fixing in repair pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fixing in repairs chromium plated shower roses with swivel joints of 75mm size complete all as specified & directed.

S&F in repairs CP brass jet spray with hand hold arrangement incl. 1.5m long flexible pipe with hook of superior quality complete all as specified & directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F in repair corner glass shelf with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F of Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified & directed.

Demoliton & breaking up 100 mm drain pipes (Salt glazd work, AC or re-inforced concerete) complete all as specified & directed.

S&F in repair Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified & directed.

Supply & fixing in repair grating doom 100 mm dia of PTMT complete all as specified & directed.

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation, manholes, laying of cable, pole foundation, stay, laying of pipe etc n.exc. 10 Sqm area on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

ATT to the top surface of filled earth at the rate of 7.50 litres of emulsion per square metre of surface complete all as specified and directed.

ATT to the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed.

ATT to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Material & labour for approved soil filling under the floor, spreading and levelling in layers n.exc. 25cm thick, well ramming including watering as required complete all as specified and directed.

Material & labour for hardcore of Broken stone or boulders n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat rough surface of concrete complete all as specified and directed.

Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete complete all as specified and directed.

M&L for Form work to sides and soffits of beams lintels etc finished rough flat surface complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete complete all as specified and directed.

M&L for form work to the edge of concrete flat n. exc 200 mm thick flat fair finished surface of concrete complete all as specified and directed.

Supply & fixing of mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per srl item no. 85 here -in-before but 6 to 8mm dia as in stirrups.

M&L for RCC, M-25, type A-1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L for RCC, M-25, type A-1 using 20 mm graded stone aggregate as in Columns, pillars etc complete all as specified and directed.

M & L for RCC, M-25, type A-1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specified and directed.

M&L for RCC M 25 type A-1 using 20 mm graded stone aggregate for roof slabs supported on walls, beams and the like complete all as specified and directed.

Material & labour for brick work with fly ash bricks in CM 1;6 straight or curved on plain exeeding 6m mean radius complete all as specified and directed.

M&L for 40mm thick DPC in cement concrete 1:2:4 type B-0 mixing with liquid water proofing admixture as per manufacturer instructiions including necessary form work (WPC shall be measured & paid seperateley) complete all as specified and directed.

Supply only integral water proofing compound all as in specified & directed.

Material & labour for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces,in CM(1:4) surface finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for 5 mm thick plaster in CM 1:3 on ceiling surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for Non Skid ceramic tiles 10 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement joint free non skid tiles.to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over and including a coat of primer complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

Material & labour for cleaning of plastered /concrete surfaces and Applying roof treatment on top of roof with APP modified membrane with non–woven polyster reinforcement/mat (centre core) with thermal insulation with white mineral gravel finish on upper side of weight not less than 3.5 Kg/Sqm & thickness not less than 3mm, laid by torch application method with overlap 100mm on length side and 100mm on the width side as per manufacturer’s instructions over and including a coat of approved cold applied bituminous oil based primer (IS-3384) @ 0.30 Litre/Sqm and including 20 mm thick screed bed in CM 1:4 to prepare slop including mixed with water proofing admixture as per manufacturer's instructions and ensure water does not stand anywhere after Sprinkle water on the roof surface complete all as specified.(Note:- WPC shall be measured and paid separately) Note: Water proofing treatment shall be provided with APP modified membrane on plastered surface as per manufacturer’s instructions and under strict supervision of manufacturer technical representative.

S&F of Flat iron hold fast made out of FI 25mm x 6mm welded to angle iron door frame duly tarred complete all as specified and directed.

S&F of Mild steel angle iron door frame 40mmx40mmx6mm conforming to Fe 410-0 incl 12mm dia deformed bars for strengthing at bottom of chowkhats incl cutting floor at bottom to accommodate strengthing bars & making good the floor in PCC 1:2:4 type B-0 to match the existing floor complete all as specified and directed.

Supply & fixing of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togather with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified and directed.

Supply & fixing of 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F aluminium tower bolts 150mm long, of extruded section complete all as specified and directed.

Supply & fixing of Aluminium Sliding door bolts, plate type, complete, 250mm long complete all as specified and directed.

S&F Steel window/ventilator factory made out of box type and shutter (double shuter) with sash bar made out of section using flash butt welding, complete including hinges ,tower bolt,handle , grill made out of 10 mm sq bar including two coat of synthetic enamel paint over and including one coat of red oxide primer, tarred hold fasts, PCC blocks, including plain/figured glass 3mm thick and wire mesh 0.36 mm nominal dia of wire and average width of aperture 1.18 mm all as shown on drg No CEPZ /TD-245/01 sheet 1/1 and CEPZ /TD -246/01 sheet No 1/2 & 2/2 complete all as specified and directed.

S&F 20mm thick Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed

Supply & fixing of bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fixing of angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

Supply & fixing of rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) triple layered ISI marked hoisted and fixed in position with all fittings complete all as specified and directed

Supply & fixing of PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply & fixing of 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply & fixing of 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply & fixing of 3mm thick sheet glass, pin headed, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed.

Supply & fixing of butt hinges, 100 mm long of stainless steel, complete all as specified & directed.

Supply & fixing of PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply & fixing of PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

Supply & fixing of vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with, integral foot rest including ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed.

S&F of Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed

S&F of 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete 1:2:4, type B -1, complete all as specified & directed.

Supply and fixing of PVC bends 110mm bore, any radius complete all as specified & directed.

S&F of PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F of PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore complete all as specified and directed

Supply and fixing Vitreous China wash down water closet pan (ISI Marked, Ist Quality) including P or S trap (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) complete all as specified and as directed.

Supply & fixing of white plastic seat cover for W.C.(E.T.) white including CP or aluminium hinging device complete all as specified and directed.

S&F of CP brass jet spray with hand hold arrangement incl. 1.5m long flexible pipe with hook of superior quality complete all as specified and directed

S&F of CP brass Hand faucnet with hand hold arrangement incl. 1.5m long flexible pipe with hook of superior quality complete all as specified and directed

Supply & fixing of vitreous china wash hand basin, white, flat back of size 550x400mm counter Wash basin (excluding taps, waste chain and plug and porcelain stopper) but including brackets complete all as specified & directed.

M&L 20mm thick Granite slab machine cut in skirting/dado laid over cement screed and jointed witht grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of any type including 15mm thick rendering in CM 1:6 complete all as specified and directed

S & F of 15mm bore Central Hole Basin Mixer Without Popup Waste System with 450mm Long Braided Hoses(15mm Cartridge Size) complete all as specified and as directed.

S & F Viterous China urinal, half stall type of size 345x320x560mm white (excluding flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around back in cement and CP urinal spreader complete all as specified and directed

S&F of Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed

M&L for Precast cement concrete solid block in PCC 1:2:4 type B-1 using (20 mm graded stone aggregates) set in CM 1:4 (size of precast concrete block as directed by GE) complete all as specified and directed.

M&L for 60mm thick PCC tile M-35 grade (interlocking paver) conforming to IS 15658-2006 over sand cushioning, interlocking tiles jointd filled with sand and campacted with mechanical plate vibrator complete all as specified and directed. Note: Sand cushoning shall be measured and aid separetaly.

M&L for Sand cushioning for interlocking tiles including spreading, levelling and compacting in layers n exc 25 mm thick complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L for PCC 1:2:4, 50 mm thick type B-1 using 20 mm graded stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and directed

M&L for PCC 1:2:4 type B-0 (12.5 graded grade aggregate) as in copings complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc complete all as specified and directed

M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) type D2 (using 40 mm graded stone aggregate) complete all as specified and directed

M&L for Slat-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed in cement mortar complete all as specified and directed

M&L for Providing, precast cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed

Taking down old unserviceable/damaged point wiring carefully of any size and description on teakwood batten / through pipe (light, fan, socket etc) incl removal of battens, pipes, sockets, switches, shades, ceiling fittings, bulk head fittings ceiling rose etc complete and making good disturbed portion of wall to match with the existing surface complete all as specified and directed

M & L for point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including rigid PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including anodised pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained. (Ph-Red, N-Black, Half -Yellow, Earth- Green).

All as per Srl item No 152.00 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.

All as per Srl item No 152.00 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M & L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodised pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green).

S & F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin 5 amps flush type 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

S & F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

Supply and fixing ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.

S & F of CFLs with LED Lamp, B22 type ,14 watt,complete all as specified and directed.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the same for distrubed surfaces complete all as spd and supply and fixing in replacement PVC type AC Ventillation fans, Single phase, copper winding 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed.

S & F energy saving decorative LED box type (4 Feet), 230 volts, light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge.Make of LED Fitting:- CROMPTON DMLN1LT8-16 or Technocommercially equivalent in any of the make mentioned in list of products.

S & F energy saving LED Rod 20 watt (4 Feet), 230 volts, 6500 K energy efficient tube light complete all as spd and directed. Make of LED Rod:- CROMPTON LTT8-20 or Technocommercially equivalent in any of the make mentioned in list of products.

S & F Sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed

S & F Sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed

S & F Sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 6 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed

M & L MCB SP 240 volts any rating from 20 to 40 amps, with rupturing capacity 10 KA, 'C' curve including providing thimble for out going cables complete all as specified and directed.

M & L MCB SPN 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, 'C' curve including providing thimble for out going cables complete all as specified and directed.

S&F of sub Main Wiring in replacement with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x4 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 4 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match existing surface complete all as specified and directed .

S & F bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length not less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed. Make: Crompton cat Part No.- LSTS-25-CDL or Technocommercially equivalent in any of the make mentioned in list of products.

S&F of LED mirror light fitting 2 feet long 1x10 W surface and wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation with polycarbonate diffuser and integral electeronic driver including taking down old fitting complete all as required at site or directed.

M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate 15cm thick alround and PCC pit in PCC 1:2:4 and RCC cover precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed. (Note: Excavation and earth work is deemed to be included in the rates quoted).

Supply, fixing, testing and connecting the BEE rated 5 star ceiling fan 230 volts, single phase of 1200 mm sweep double bearing type, copper winding, Air delivery 230 m3/min including down rod, canopy cover etc and connecting with flexible copper conductor of 1.50 sq mm and including writing of MES No with black enamelled paint 2.0 cm high complete all as spd and directed.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the same for distrubed surfaces complete all as spd and supply and fixing MS Ventillation fans, Single phase, copper winding 230 volts 450 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed.

S&F of LED Flood Light fitting 150 W LED, CCT not less 6000K pressure die cast aluminium housing ,heat resistance toughened glass with frame IP 66 protection LED lumen efficacy not less then 120 lumen/watt, reflector lenses for uniform light distribution on each LED complete fixed on New bracket and making connections with provision of PVC insulated copper conductor (multistranded) cable of 1.5 Sq mm size in PVC conduit with clamps complete all as specified and directed. (Note :- New bracket and PVC wire will be measured and paid separately.

S&F of LED Street Light fiting 90 W LED, CCT not less 6000K pressure die cast aluminium housing ,heat resistance toughened glass with frame IP 66 protection LED lumen efficacy not less then 120 lumen/watt, reflector lenses for uniform light distribution on each LED complete fixed on New bracket and making connections with provision of PVC insulated copper conductor (multistranded) cable of 1.5 Sq mm size in PVC conduit with clamps complete all as specified and directed. (Note :- New bracket and PVC wire will be measured and paid separately.

M&L for brackets, fixing of street/flood light fittings bend to shape, made out of 32 mm dia GI pipe medium grade upto 1.5 mtr length fixed with and including two sets of MS clamp made out of Flat iron of size 50x6 mm, fabricated to shape and fixed with nuts, bolts & washers & two coats of aluminum paint over and including a coat of red oxide primer complete all as specified and directed.

M&L for factory made sheet metal enclosure of suitable size out door type fabricated out of 2.4 mm thick CRCA sheet powder coated dust and vermin proof having entry from lower side with cable gland for cable of size 10 Sq mm 2 core with aluminium bus bar single phase and nautral current carrying capacity of aluminium bus bar should be upto 63 Amps mounted on poreclain insulator complete with operating voltage 220 volts, 50 Hz including one number MCB of capacity 6 amp SP, 'C' curve for street light mounted in sheet metal enclosure prewired with minimum 1.5 Sq mm copper conductor cable with lugs including locking arrangement complete and enclosure fitting on pole with clamps nuts, bolts and washers including making connection from junction box to steet light with 1.5 sqmm PVC insulated FR cable for phase, neutral and earth complete all as specified and directed.

S&F three core copper conductor PVC insulated cable of size 1.5 sqmm FR multistranded 1100 volts grade complete all as specified and directed.

M&L for Prestressed concrete pole, 9.0 metres long 102mm x 152mm at top and 102 mm x 289 mm at bottom, class 10, numbering new pole and applying two coats of synethic enamel paint upto 1.5 mtr from top of coping in black and white strip alternately each 30 cm wide complete all as specified and directed. (Note: Earth work including excavation, Returning filing, PCC work, removing excated material will be measured and paid separetly under respective items of schedule) complete all as specified and directed.

Supply and erecting of steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-64 (12.0 metres long) including numbering new pole and applying two coat of synthetic enamel paint upto 1.5 mtr from top of coping in black and white stip alternately each 30cm wide incl dismantling old Pole complete all as specifed and directed. (NOTE :- Earth work, Cement concrete in foundation, coping etc will be measured and paid separately under relevant item.

Excavation in trenches not exceeding 1.5 m wide and n. exc 10 sqm area on plan and exceeding 1.5 mtr but not exceeding 3 mtr in depth and getting out in soft/loose soil for laying of cable, pole foundation, stay, laying of pipe etc complete all as specified and directed.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable punned down to 18cm complete all as specified and directed. Note:- Punned thickness 18cm shall be considered for payment.

M&L for Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid complete all as specified and directed.

M&L for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade, of cross-sectional area 10 Sqmm, 2 core complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in foundation of poles filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using20mm graded stone aggregate) as in foundation of poles/coping, stay etc complete all as specified and directed.

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 28,110.00). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 5% (Five percent) of the accepted contract sum shall be delivered by the successful bidder immediately after the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249.

JP AND CO.

M/S PREMI CONSTRUCTION CO

GANDOTRA CONSTRUCTION CO

kay gee construction co

VIKRAM SINGH MANHAS

THAKUR BUILDERS