11/SE/EWC/AYO/2020-21

Amount

Carriage of following material (FROM SI. No. 1.01 To 1.15) from store centre under EEESD, Ayodhya to dump store & from dump store to the site of work including loading, unloading and proper satcking at site etc.

PCC 8.5 Mtr

STP 11.0 MTR.

ACSR Weasal Conductor.

11 KV V- Type Channel Cross- arm

Stay Wire 7/10 SWG.

11 KV 3x185 sq mm XLPE Cable

11 KV Pin Insulator (Polymer)

11 KV Disc Insulator T&C Type (45 KN, Polymer)

11 KV Cable Jointing kit outdoor 3x185 sq mm

T-off Channel

Ms Top channel 100 x 50 mm. 2240 mm

M.S. Channel 65x65x6 mm Bracing 2700 mm long

G.I. Wire 8 SWG

G.I. Wire 6 SWG

Guarding Angle 50x50x6 mm

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 11 KV Line on 8.5 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 no 11 KV Cross Arm (Contractor shall provide 3 nos. 11 KV G.I. Pin, necessary clamps, F-brackets, Nut - Bolts, Washers & all Civil Materials etc.)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Double pole of 11 KV Line on 8.5 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 No Top channel Fitting of Bracing angle, as per norms. (Contractor shall provide 3 No G.I. Pin, clamps, disc fitting, Nut - Bolts & all Civil Materials etc.)

Erection of single stud pole support on PCC Pole 8.5 Mtr/11mtr STP long with fixing of necessary clamps and other accessories required for erection. (Contractor shall provide clamps, Nut - Bolts, Washers etc)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 11 KV Line on 11 Mtr ST Pole with fitting of necessary clamp & other acessories like 1 no 11 KV Cross Arm as per norms. (Contractor shall provide 3 nos. 11 KV G.I. Pin, necessary clamps, F-brackets, Nut - Bolts, Washers & all Civil Materials etc)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Double pole of 11 KV Line on 11 Mtr ST Pole with fitting of necessary clamp & other acessories like 1 No 11KV Top channel , Fitting of Bracing angle (Contractor shall provide 3 No G.I. Pin, necessary clamps, disc fitting, Nut - Bolts & all Civil Materials etc.)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Sectional Single Pole for 11 KV Line on 11.0 Mtr ST Pole with fitting of necessary clamp & other acessories like T-off Channal. (Contractor shall provide 4 nos. 11 KV G.I. Pin, Disc Fitting, necessary clamps, F-brackets, Nut - Bolts, Washers & all Civil Materials etc.)

Line Crossing , Guarding along with 11KV line crossing line crossing by fixing M.S. Angle at double pole and 2600mm long at single pole by stringing and sagging of 3 No. G.I.wire, tightining with mounting, (All the material will be supplied by the contractor except supporting M.S. Angle & G.I. wire)

Earthing of Pole STP/PCC by 6 SWG Wire by providing and fixing of earthing as per norms complete in all respect. (Contractor shall provide all the material Like Earthing rod)

Grouting of following structure by digging of pit 1.5 Mtr/1.83 Mtr deep for 8.5 Mtr PCC / 11 Mtr STP respectively, groutung with 1:4:8 Ratio cement,corse sand & 20mm gauge stonegrit 0.268/0.285 cu mtr for 8.5 mtr PCC Pole & 11 mtr STP, plinthing 0.3 Mtr above G/L and proper plastering.

11 Mtr ST Poles

8.5 Mtr PCC pole

Painting of 11 Mtr STP with one coat of ready mixed primer and 2 coats of AL.Paint of good quality including cost of material, Labour and T&P complete in all respect.

Patrolling on feet and lopping/Chopping of tree branches (Tree cutting) coming in route for proper clearence of 11KV line from beginning to tale-end.

Fabrication and errection of cross arm Supporting Angle 50X50mm size sutable for angle cros arm(all the material arrenged by the contrector like angle, clamp, bolt and nuts)

Cradle Guarding of 11KV line at road crossing, 11KV line crossing, canal/telephone line crossing by fixing M.S. angle 65X65X6mm, 3500 mm at double pole and 2600mm long at single pole by stringing and sagging of 3 No. G.I.wire and all fittings ,tightining with mounting.

Laying Stringing , Sagging , binding and jumpering of ACSR weasal Conductor . 3 Phase of 11 KV Line including fixing, mounting of P.G. clamp suitable for weasal Conductor at sectional point. ( Al the requred material arrenged by the contrector except conductor)

Laying of single circuit In Normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks and ston slab top of the cable/ HDD System (All the material will be supplied by the contractor except 11KV XLPE cable)

Installation of Heat Shrinkable Type cable jointing kits O/D end Termination and S/T Joint suitable for 11 KV XLPE cable confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any.

Hoisting of 11 KV Cable on existing/erected support with provision of MS Pipe 150 mm dia 3 mtr long suitable for 3x185 sq mm cable fixing of 2 No. Ms Angle support, 9 no. p.g. Clamp and 3 no. long barral alu. lug and its clamping, and 02 nos. supporting angle 65X65X6, 2500 mm long, jumpering properly as per RESSPO Norms. (All material will be supplied by the contractor like p.g. clamp, lug,supporting Angle 65X65X6,2500 mm. N&B etc).

High Pressure testing to which 11 KV Line able to be stand for duration of 5 minutes after completion of Laying, Stringing, sagging, binding and Jumpering of ACSR weesal conductor and 3X185 sq mm cable. ( Testing equipment will be arranged by the contractor)

Erection of Stay set at sectiional Pole and angle locatiion and its grouting. (All material will be supplied by the contractor except stay wire, Stay Set).

M/S SATYAM TRADING COMPANY

M/s Shukla Enterprises