Construction of CC Road and Drain in Advinagenahalli village Kodigenahalli Hobli Madhugiri Taluk (Reserved for CAT-II(A))

Construction of CC Road and Drain in Advinagenahalli village Kodigenahalli Hobli Madhugiri Taluk (Reserved for CAT-II(A))

Scarifying Existing Granular Surface to a Depth of 50 mm by Manual Means as per the directions of the Engineer in charge of the work.

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Wet Mix Macadam (Plant Mix Method) Providing laying, Spreading and Compacting graded stone aggregate to wet mix macadam Specification including Premixing the Material with Water at OMC in Mechananical...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Addendum I Percentage Additionalities for Formwork,Centering & Scaffolding Foundation, Sub structure of Cross drainages 5% as per the directions of the Engineer in charge of the work.

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...