MODERNIZATION OF LINK ROADS CHABEWAL CONSTITUENCY MARKET COMMITTEE HOSHIARPUR GROUP NO. 2 SPECIAL CENTRAL ASSISTANCE (PHASE-II) TO STATES FOR CAPITAL INVESTMENT 2025-26 (One Year Defect Liability period plus 4 Years Maintenance of Road)

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: EXECUTIVE ENGINEER PROVINCIAL DIVISION, PWD B&R Br., HOSHIARPUR

Name of Work: MODERNIZATION OF LINK ROADS CHABEWAL CONSTITUENCY MARKET COMMITTEE HOSHIARPUR GROUP NO. 2 "SPECIAL CENTRAL ASSISTANCE (PHASE-II) TO STATES FOR CAPITAL INVESTMENT 2025-26" (One Year Defect Liability period + 4 Years Maintenance of Road)

Contract No: Civil Works

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Unit Rate Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Compaction of earth work & Preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. as per CSR 24.4 (c ) 66180.28 Sqm 6.32 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

2 Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications 38476 Mtr. 84.86 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

3 Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. 6.19 17027.56 Cum 33.71 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

4 Construction of granular sub-base by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORD technical specifications 5849.9 Cum 1567.35 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

5 Water Bound Macadam Grading I (withoutscreening for low volume Roads/undersigned Roads Providing, laying, spreading and compacting stone aggregates of Grading I to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical specifications 1549.68 Cum 1887.35 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

6 Water Bound Macadam Grading II (without screening for low volume Roads/undersigned Roads Providing, laying, spreading and compacting stone aggregates of Grading III to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming Water Bound Macadam Grading II requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications without screeening 4192.85 Cum 1882.12 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

7 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications 6304.06 Cum 2144.78 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

8 Prime Coat with Bitumen Emulsion-SS Providing and applying Prime Coat with bitumen Emulsion-SS on prepared surface of granular base including cleaning of Road Surface and spraying primer at the rate 0.85 per sqm complete as per technical clause 502 of MORT&H specifications CSR 24.15 38757.5 Cum 34.71 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

9 Credit of materials Bricks bats 626.94 Cum 531 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

10 Credit of materials Bricks 180840 Nos 2.5 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

11 Kassi work undressed involving an average horizontal throw up to 2.0 metres and an average vertical lift up to 0.5 metres including breaking of clods Complete as per CSR Item no 6.2 (a) 18983.98 Cum 81.12 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

12 Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications as per CSR 24.24 58244.83 Sqm 82.93 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

13 Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications as per CSR 24.16 (b) 186134.58 Sqm 23.23 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

14 Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications as per CSR 24.25a 142569.67 Sqm 143.52 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

15 Providing and laying of premix sand seal coat premixed in Continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications) as per CSR 24.28 (C ) Seal Coat Type B 142569.67 Sqm 58.68 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

16 Providing and laying bituminous concrete 30mm to 45mm thick with Continuous type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4%, laying with a Paver inisher Mechanical to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of MORT&H specifications 1328.85 Cum 11174.13 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

17 Making 50 mm x 50 mm furrows 45 degree to the center line of the road and at one meter interval in the existing bituminous wearing coarse including sweeping and disposal of excavated material within 1000 meters lead complete as per technical Specifications. 38204.92 Sqm 5.27 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

18 Dismantling brick edging in strengthening portion include sorting and stacking dismantled material Complete as per CSR 8.5 i 1254.82 cum 144.33 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

19 Dismantling of existing Surface Pavement including crust and stacking of usable material and disposal off unusable material complete in all respects. 570.5 cum 184.36 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

20 Relaying of recovered material obtained from dismantling of road crust as Construction of granular sub-base by providing coarse graded material grading-I, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per technical clause 401 of MORT&H specifications 342.26 cum 146.44 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

21 Construction of Concrete Road 12' Complete in all Respect. 128 Mtr. 5557 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

22 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge. Complete in all respect as per analysis attached in estimate. 14845 Sqm 1599.16 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

23 Reinforced cement concrete M-15 grade village board of standard design fixing in position including painting and printing etc. complete as per PWD specifications CSR 24.40 48 Each 5498.3 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

24 Cautionary sign board 900x900x900mm triangularas per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 495609 and as per IRC 67 2012 complete as per CSR Item No 24.44 a (i) 50 Each 4274.77 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

25 Definition Plate 600x200mm rectangular as per as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 complete as per CSR Item no 24.49 b 29 Each 681.78 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

26 Place Identification sign board 900x600mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 4mm thick aluminium Composite material (ACM) sheeting Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 Complete as per CSR Item no 24.47 b 22 Each 6921.4 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

27 Providing and making rumble strips 15-20mm highat centre, 250mm wide placed at 1m centre tocentre over freshly laid bituminous layer by usingclose graded premix surfacing material type B atapproved locations to control speed and marked with 100mm wide white strips of thermoplastic road marking paint. The close graded premix surfacing material type B shall conform to technical clause 512 and thermoplastic road marking paint shall conform to technical clause 803 of MORT&H specifications 1154.6 Mtr. 107.36 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

28 Hazard Marker sign board 300x900mm rectangular as per IRC 67-2012 with high intensity microprismatic grade retro reflective sheeting type XI as per ASTM D 4956- 09 and as per IRC 67-2012 fixed over 4mm thick aluminium composite material complete as per clause 801 of MORT&H specifications as per CSR 24.51 8 Each 4074.05 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

29 Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens or Glass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. 6975 Each 256.75 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

30 Providing & erecting "W" type metal beam crash barrier single sided comprising of 3mm thick corrugated sheet metal beam rail 70cm above road or ground level fixed on channel vertical post 150x75x5mm spaced 2mtr centre to centre 1.80mtr high, 1.1mtr below road or ground level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS:1367 & IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm, 330mm long fixed firmly into ground with vertical hydraulic self driving machine for vertical post complete as per approved drawings and technical clause IRC: 119-2015. 17700 Mtr. 2758.53 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

31 Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications Complete as per CSR Item No 24.57 11069.21 Sqm 324.92 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

32 Double side 900x600 CM sign board 31 Each 9473.81 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

33 Videography of Road. 27 Each 1000 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

34 Add 1% Cultural Cess 173022888 percentage 0.01 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

35 Add 1% Cancer Cess 173022888 percentage 0.01 Excess(+) Full Conversion INR 1 Collection of Pantoons manufactured with M.S. Plate complete in all respects ( as per standard design) item1 123.223 Nos

36 Routine Maintenance after completion of Construction work as per periodicaly to routine maintenance mentioned in the technical specifications (For 2nd Year) 65.521 Km 45198.51 Full Conversion INR

37 Routine Maintenance after completion of Construction work as per periodicaly to routine maintenance mentioned in the technical specifications (For 3rd Year) 65.521 Km 60982.43 Full Conversion INR

38 Routine Maintenance after completion of Construction work as per periodicaly to routine maintenance mentioned in the technical specifications (For 4th Year) 65.521 Km 87692.86 Full Conversion INR

39 Routine Maintenance after completion of Construction work as per periodicaly to routine maintenance mentioned in the technical specifications (For 5th Year) 65.521 Km 107495.85 Full Conversion INR

40 Add 1% Cultural Cess on maintenance 19746042 percentage 0.01 Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select Total Cost of Routine Maintenance

Quoted Rate in Words