Construction of Electric Crematorium at Chitradurga CMC and Gas Crematorium Gadag CMC under UIDF scheme

Construction of Electric Crematorium at Chitradurga CMC under UIDF scheme

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring,strutting, barricading, caution lights, including...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour with...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Providing and constructing load bearing wall with concrete solid blocks having block ebsity not less than 1800 kg/m3 Having aq minimum average compressive strength of 5.00 N.mm2 confirming to IA 2185 ...

Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ t...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of...

Extra for providing Manually operated Bevel Gear Box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions...

Providing & fixing of 3track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanize...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle...

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be m...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :150x10mm

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws

etc. complete 75mm

Providing and fixing bright finished brass handles with screws etc. complete: Brass handles 100 mm with plate 150x32 mm

Providing and fixing door latch with necessary screws etc complete Bright finished brass latch

Providing and fixing ISI marked oxidised M.S. single acting spring hinges

with necessary screws etc.150mm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or roundbars etc. including priming coat with approved steel primer all complete. Fixed to steel ...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced w...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as requi...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :

Providing and fixing in position below given nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments specification.

Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS...

Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size...

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle ...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc 125x65x2.12mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade, with necessary screws etc...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms

Providing and fixing in position brass stop cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specificati...

Providing and fixing in position brass bib cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specificatio...

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g.

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

Providing and fixing bright finished brass hard drawn hooks and eyes :300mm

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes j...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes j...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes j...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing...

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm dia

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm dia

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :40 mm dia

Providing and fixing gun metal non- return valve of approved quality

(screwed end) :40 mm nominal bore Horizontal 40 mm nominal bore

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :*100 mm inlet ...

Providing and fixing PTMT grating of approved quality and colour.

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge.

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plasteri...

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickn...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments SIZE 50 MM

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments SIZE 50 MM

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990with latest amendments complete with GI fittings (excluding the costof fittings) with cuts and threads wherever necessary, including ...

Providing wrought mild steel (galvanized) GI collar confirming to IS1239-II, 1991 with latest amendments if any For 50 mm dia GI collar

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any For 50 mm dia GI BEND

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Granular Sub Base (By Mix in Place Method)

Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place ...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3fixed and finsihed in line as per direction of Engineer in charge.

(The cost of P...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Stripping of top soil from borrow areas located in agriculture fields, storing at a suitable place, spreading and relayingafter taking the borrow earth to maintain fertility of the agricultural field,...

procurement of quality red earth/soil and heap around pit (1x1x0.15mt)

Supplyofinputssuchassand,FYM,Redearthin1:3:6 ratio.mixingandspreadingthe mixture to 7.50cm thickness wherever required.Red soil 0.0075m3 Farm Yard manure 0.0225m3 sand0.045m3

Procurement of quality lawn grass Bermuda Grass Turf

Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of slope to toe of slope in fills, constru...

Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted w...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. 25 mm

Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm usin...

Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm usin...

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200 x 90 x 65 mm

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase ...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase ...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase ...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase ...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 80 mm

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 110 mm

Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with ...

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with ...

Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with...

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin ...

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE star rated and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 4...

Supplying wall mounting fan suitable to operate at single phase 230v AC. supply. 300 mm Sweep

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of a...

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of...

Extra length of GI pipe of class B 19mm dia for down rod.

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm)

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compl...

Supplying & Fixing of 70-150 W lamp holder 2 Pin

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycar...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycar...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyca...

Supplying and Fixing of........mm dia class A GI pipe bracket upto 2ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / w...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires

Fabricating, supplying and erection of ... ms long hot dip

Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, in...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1500 mm Stand...

Automatic Switch for Street Light

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 Pair

Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 10 Pair

Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO...

Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, a...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 6 mm GI strip

GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 6 mm Copper strip

GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 600 x 600 x 3 mm Copper plate

RCC Pole - 9 Mtr Long, 145 Kg WL

(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as

PSCC Pole - 8 Mtr Long, 140 Kg WL

(Dwg No. BESCOM/GM/QS&S/17 Dtd 24.11.2018) as

per REC Standards

11 kV, Special 3 Pin Cross Arm - GI

HT ST Support 50x8 mm Flat - GI

Spiral Earth Electrode

Anticlimbing Device GI Barbed wire (12 Mtr/Kg)

Guarding for Road crossing, Telephone Line Crossing,

between HT & LT Line Crossing

LT 4 Pin Cross Arm - GI

No. 8 Strain Insulator

RCC Pole Clamp - GI

11 kV GI Pin for 11 kV Ceramic Shell Insulator

DISC Insulator 45 kN Porcelain

(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

7/10 SWG Guy Wire

(7/3.251 mm Dia), Std Wt: 680 Kg/KM

PG Clamp Rabbit to Rabbit

9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type

with GROUND DISCONNECTOR

(Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007)

11 kV, HG Fuse Unit with Solid Core Insulator

(Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018)

For 100/300 kVA 4/5 Star Rated Transformer on

RCC Pole - 9 Mtr Long, 145 Kg WL - GI

Three H Frame with Transformer Seating and Seating

angle support cross arm for 11 Mtr Spun Pole up to and

including 250 kVA (UG Cable)) - GI

11 kV, 200 Amps Single Break GOS

(Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018)

11 kV, DOLO Cutout Conventional to Erstwhile KEB

Transparent Alkathine tube 19 mm dia, 2 mm thick in

coils of 30 Mtr

Caution/Danger Board

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved

Drawing. Hard Soil

Digging of Pit for GUY SET Hard Soil

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

Providing Spiral Earth Electrode type earthing (without

charcoal, salt etc.,)

For Three H Frame without Transformer Seating and

Seating angle support cross arm for 11 Mtr Spun Pole up to and including 250 kVA (UG Cable) (excluding erection of Pole)

Fixing of 4 Pin cross arm with Insulator and Braces fixing

Fixing of HT/LT Single Top Support

Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT

Stringing of conductor Rabbit ACSR, binding of conductor on each insulator and dead ending on strain or disc /strain insulator by means of clamps.

Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring

Fixing of GOS including wiring (11 kV Single Break 200

Numbering and Scheduling of Pole

Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 B. CABLE ENTRY TYP 250 kVA, Aluminium Wdg, Star 1 (4 Star)

LT Distribution Box for 100/250 kVA DTC with MCCB's

3 Phase CT/PT operated alternating current Smart

Meter of Accuracy Class 0.2s DLMS with GPRS

Communication Module

11 kV HT Metering cubicle of different CT Ratio, Both

side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar,

Modem & 2 No of Meters for 3 Phase 4 Wire Meteri...

Erection of 200 - 250 kVA Transformer

Erection of HT metering Cubicle on Platform

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per

IS-3975 95 Sqmm, (54 GI Wires - 2.5 mm Dia)

Heat Shrinkable Indoor Type Cable Termination Kit

for XLPE Cable 3x95 Sqmm

Heat Shrinkable Outdoor Type Cable Termination

Kit for XLPE Cable 3x95 Sqmm

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT Cable 3x95 to 150 Sqmm

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 185 Sqmm,...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 120 Sqmm,...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, ...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, ...

Heavy Duty Copper Terminal Long Barrel

25 Sqmm Copper Terminal, Apprx Wt: 11 Gm

Heavy Duty Copper Terminal Long Barrel

50 Sqmm Copper Terminal, Apprx Wt: 26 Gm

Heavy Duty Copper Terminal Long Barrel

95 Sqmm Copper Terminal, Apprx Wt: 58 Gm

Heavy Duty Copper Terminal Long Barrel

120 Sqmm Copper Terminal, Apprx Wt: 64 Gm

Heavy Duty Copper Terminal Long Barrel

185 Sqmm Copper Terminal, Apprx Wt: 158 Gm

Brass Cable Gland 25

Brass Cable Gland 32

Brass Cable Gland 40

Route & Joint indicating slab with MS Anchor rod

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 120 to 240 Sqmm

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.

Supplying and fixing Electronic Trivector Meter (ETV)suitable for operation LT operation and - CT operated meter in polycarbonate body in class0.5 accuracy as per IS 14697 and completely wired.

Supplying and fixing of Shunt trip suitable for MCCB.CBCT

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Rotary handle for MCCB

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplyingofonloadchangeoverswitches4poles,AC-23ADuty,415V,50Hz,ACSupply.Withallaccessories.(SMEnclosureSheet Metal Execution) 100 A

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing s...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40A 2 pole

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing s...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Main Furnace frame :Supply, Installation, Testing, & Commissioning of Main Furnace:Supply of Fabricated main frame for housing refractory bricks and other equipment, Furnace the main door, Furnace su...

Refractory Materials:Supply, Installation, Testing, & Commissioning of refractory items such as ceramic fiber blankets, insulation bricks, Hot Zone bricks (IS8), Cold Zone bricks (IS6), body resting b...

Electrical vertical heating coil:Supply, Installation, Testing, & Commissioning of vertical Heating coilPower of 42 KW. Heating coils are made out of 8 swg Kanthal APM wire / Nichrome 80/20 wire of 8 ...

Body charging Trolley:Supply, Installation, Testing, & Commissioning of Body Charging Trolley Supply of fabricated Hydraulically operated Body Charging Trolley with power pack and connecting pipelines...

Electric remote control panel:Supply, Installation, Testing, & Commissioning of Electric Remote Control panel.The control panel is built with the following components housed in Panel made out of M S s...

Control & power cables:Supply, Laying, Testing, & Commissioning of Control & Power CablesSupply of power cables, bus bar laying, supporting tray, conduit pipes, from the control panel to various equip...

Water pump:Supply, Installation, Testing, & Commissioning of Water pump Supply of water pump for scrubber unit.1 Hp motor, 3 Phase, 415V, for circulating the water in wet venture scrubber unit and nec...

Fresh air blower:Supply, Installation, Testing, & Commissioning of Fresh air blower Made out of MS Sheet, direct driven motor of 1 Hp, 3 Phase, 415V, of suitable capacities, mounted on a M S rigid ang...

Wet venturi scrubber unit:Supply, Installation, Testing, & Commissioning of Scrubber unit Wet scrubber unit with venturi arrangements made out of S S 304G sheets. In unit-1 smoke will completely come ...

Online exhaust blower:Supply, Installation, Testing, & Commissioning of online-Exhaust Blower

Fabricated with an S S 304G sheet, the impeller driving shaft is also made out of S S with bearing support...

Erection charge:Erection charges for Erection, testing, commissioning, handing over the cremation furnace(a) Fixing of Frame, Main Door, Counterweight, Mechanical and Electrical operating door system....

Transportation charges:Packing, forwarding, Loading, and Unloading charges from our factory in Bangalore to the crematorium site.

Self supporting chimney:Supply, Installation, Testing, & Commissioning of Self-supporting chimney.The chimney is made out of M S Plates, angles, flats, grouting bolts & gusset plates, ladder, platform...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade English and Roman

Construction of Gas Crematorium at Gadag CMC under UIDF scheme

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barr...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, st...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement...

Providing and laying in position plain cement concretefor levelling course for all works in foundationThe granite/trap/basalt crushed graded coarse aggregates and fine aggregates as ...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consoli...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machi...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing 20 mm cement plaster of mix:1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and rem...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges u...

Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand

: 4 graded stone ...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges u...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges u...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges u...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges u...

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/weldi...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges ...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required ...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rend...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smo...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved ...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applie...

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end ...

Providing & fixing of 3track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL- 9016) sections and with minimum TiO2(Titanium Di...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(PWD SR...

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete (PWD SR 2023- 24(P.No.105/12.61) (Volume-2)

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(PWD SR 2023-24(P.No.105/12.62) (Volume-2)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, wi...

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than33 gms(PWD SR 2023-24(P.No.105/12.64) (Volume-2)

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5 mm (heavy type) (PWD SR 2023- 24(P.No.107/12.75.1) (Volume-2)

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.F...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at ...

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & d...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding ...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter o...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, m...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or roundbars etc. including priming coat with approved steel primer all com...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved bra...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the ar...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in col...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of a...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rou...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chaj...

Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and ...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using s...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes fo...

Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass ...

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g. S.R Page No-117 I,.No.13.14 (Volume-2)

Providing and fixing Brass full way valve gate with C.I. wheel of approved qualitya. 32mm.dia

Providing and fixing in position below given nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipmen...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead,...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with ...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant car...

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetit...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction o...

Sand Filling in Wells complete as per Drawing and Technical Specifications. (UNI SR 2023-24 (Vol-3 P.No.112/11.36)

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring,strutting, barricading, caution ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and constructing load bearing wall with concrete solid blocks having block ebsity not less than 1800 kg/m3 Having aq minimum average compressive strength of 5.00 N...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges u...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry includ...

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, ...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good ...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with ...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm l...

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g (SR page no- 121, Item No-13.24 (Volume-2)

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms (SR page no-120, Item No- 13.21.1 (Volume-2)

Providing and fixing in position brass stop cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads com...

Providing and fixing in position brass stop cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads com...

Providing and fixing in position brass bib cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete a...

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g. Page No-121,Ite...

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

Providing and fixing bright finished brass hard drawn hooks and eyes :300mm Page No-200,Item No-20.29.1 (Volume-2)

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, t...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, t...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, t...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings ...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings ...

Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings ...

Providing and fixing water meter with stop cock, jam nut, socket in G.I pipe line including cutting and threading the pipe and making long screws including cost of all materials, labour, HOM of ...

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :a.25mm.dia. Page No-117,Item No-13.53.3 (Volume-2)

Providing and fixing Brass full way valve gate with C.I.wheel of approved quality (screwed end) :Page No- 117,Item No-13.4.2 & 13.4.3 (Volume-2) b. 40mm.dia

Providing and fixing in position below given nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments specificati...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors...

Providing and fixing PTMT grating of approved quality and colour.a. 125mm dia. Page No-120,Item No-13.22.1.2 (Volume-2)

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge. Page No-201,Item No-...

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed ...

Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size ...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregate...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregate...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding ...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and remo...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening ...

Providing 20mm square M.S.Footrest and fixing in manhole with 1:3:6 cement concrete block of 20x20x10 cms using 20mm an ddown size metal of size including cost of materials...

Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensil...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electricalsounding b...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one e...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall b...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical r...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per i...

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt ...

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments (PWD CM SR2023-24/VOL- 5/Pg No-154/1...

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (PWD CM SR2023-24/VOL- 5/Pg No-154/13.25) S...

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 ...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting cl...

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC i...

Clearing the area by sweeping / removing unwanted materials such as dry leaves,garbage etc.Horticulture Department Common Sanctioned

Garden Soil Laying for ground leveling and forming.

Developing First grade Mexican lawn by cleaning the site and initial earth work excavation of soil to minimum of depth for 0.3m in all type of soil, removing debris unwanted growth etc and fillin...

Developing hedges by digging trenches of size 0.45M x 0.45M filling 50% with the mixture of sand (0.01112 cum) FYM (0.0224 cum) red earth (0.0336 cum) (i.e.in the proportion ...

1) Durantha Plant, 2) Irantimum Plant, 3) Akelifa timma plant,4) Akelifa Godreg, Etc., Approved Rate 2015-16

Digging of pits o size 0.75m x 0.75 x 0.75m and filling up to 50% of the pits with top excavated soil and remaining 50% with sand (0.035cum) F.Y.M. 0.070cum) red earth (0.105 cum) in t...

Areca Palm, 2) Royal Palm, 3) Faicus Beneginam, 4) Faicus Starlight Etc., Approved Rate 2015-16

Digging pits of size 0.45 x 0.45 M x 0.45 M, filling up to 50%of the pits with top excavated soil and remaining 50% with the mixture of sand (0.014 Cum) Red Earth (0.021 Cum) (i.e. in the prop...

1) Ixora plants ,2) Hybiscuous plants 3) Iporbiya plants, 4) Jathropa plants, 5)Sang of India plants, 6)Dust miller plants, Etc Approved Rate 2015-16

Providing and laying surface mount rainforcement bench confirming to RDSO spect without Arm rest and Back support with material specification of RCC M-30 grade concrete mix in accordance with 15 : 102...

Garden Maintenance Common Sanctioned SR 2022-23 INo.12.11(a) page no 51 (From Upto 8000.0 sqm

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, st...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consoli...

Providing and laying in position plain cement concretefor levelling course for all works in foundationThe granite/trap/basalt crushed graded coarse aggregates and fine aggregates as ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking,...

Mains Pipe Supplying heavy gauge PVC conduit pipe dia mm thickconfirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in case of RCC c...

Mains Pipe.Supplying heavy gauge PVC conduit pipe dia mm thickconfirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in case of RCC ce...

Mains Pipe.Supplying heavy gauge PVC conduit pipe dia mm thickconfirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in case of RCC ce...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Metal modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Modular switch Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.3.6.1)6Amps one way. PWD Ele SR 2023-24 Page No.8 Item code 3....

Modular socket Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.3.6.2)6A Two Way Switch PWD Ele SR 2023-24 Page No.8 Item code...

Modular 16Amp switch Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.7) 16A One Way Switch PWD Ele SR 2023-24 Page No.8 ...

Modular 16Amp Socket Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.10) 6/16A Universal Socket PWD Ele SR 2023-24 Page ...

Stepped Fan Regulator. Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.3.6.4)Stepped Fan Regulator.PWD Ele SR 2023-24 Page No...

TV/Telephone Socket Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.3.6.11) TV/Telephone Socket PWD Ele SR 2023-24 Page No.8...

32A DP Switch Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.3.6.9) 32A DP Switch PWD Ele SR 2023-24 Page No.8 Item code 3.6...

industrial plugs Supplying and fixing of metal clad industrial plugs and sockets. 3pole+earth 440V PLUG 3.13.4 ) 32A PWD Ele SR 2023-24 Page No.8 Item code 3.13.4

industrial Socket Supplying and fixing of metal clad industrial plugs and sockets. 3pole+earth 440V SOCKET 3.13.8 ) 32A PWD Ele SR 2023-24 Page No.8 Item code 3.13.8

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying of feet PVC Batten with integrated LED tube with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0...

Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power facto...

Batten Holder Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 3.14.6) 6A Batten Holder PWD Ele SR 2023-24 Page No.9 Item code 3.14.6

Celling Rose Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.3.14.5) 6A Bakelite Ceiling Rose PWD Ele SR 2023-24 Page No.9 Item code 3.14.5

Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bea...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.6.2.2) 15" Sweep (450 mm) PWD Ele SR 2023-24 Page No.55 Item code 6.2.2

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling /rafters/girders using 23/0.0076" twin twisted PVC insulated wires,requi...

Fan Fixing Charges Fixing a ceiling /wall mounting fan of all capacities and all types,with necessary clamps and 'S' hook made out of 15mm dia MS rod,with 5 A. ceiling rose of approved quality with ne...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.PWD Ele SR 2023-24 Page No.55 Item c...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps bolts, nuts etc., with provision for fixing suitable type capacity MCBs single phase / ...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps bolts, nuts etc., with provision for fixing suitable type capacity MCBs single phase / ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.. 5.20.10 ) 63 A 4 pole PWD Ele SR 2023-24 Page No.17 Item code 5.20....

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required 12.58.2) 25 x 3 mm GI strip PWD Ele SR 2023-24 Page No.53 Item code 12.58.2

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...

Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on henolic/FRP/DMC insulator which are mo...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5.41.4...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete.Protection of Ov...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection of O...

Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 5.12.3 ) 125 A PWD Ele SR 2023-24 Page No.14 Item cod...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. PWD Ele SR 2023-24 Page No.18 Item code 5.38

Supplying, fixing and wiring rotary selector switch suitable for Ammeter PWD Ele SR 2023-24 Page No.17 Item code 5.27

Supplying, fixing and wiring rotary selector switch suitable for Voltmeter PWD Ele SR 2023-24 Page No.18 Item code 5.28

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS 13947.5.14.10)...

Supplying and fixing digital frequency meter with latest micro controller technology, ultra bright 4 digit LED display, from 30- 500V AC and optional or relay output for high/low frequency and wiring ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete.Protection of Ov...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete.Protection of Ov...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete.Protection of Ov...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying A rated 3phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on henolic/FRP/DMC insulator which are mou...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.5....

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 5.4.1 ) upto 5 Kvar PWD Ele SR 2023...

Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 5.4.2 ) 6 to 10 kVAR PWD Ele SR 202...

Supplying and fixing HRC fuse units base on existing switch / panel board. 5.9.2 ) 32 to 63 A PWD Ele SR 2023-24 Page No.14 Item code 5.9.2

Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 13.17.1 ) upto 5 kVAR PWD Ele SR 20...

Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 13.17.2.) 6 to 10 kVAR PWD Ele SR 2...

UG Cable 1.1 kV,XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 ...

UG Cable 1.1 kV,XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 ...

UG Cable1.1 kV,XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3...

UG Cable 1.1 kV,XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 ...

UG Cable Labour Charges Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 21.05) 2.5 to 25 Sqmm ESCOMs SR 2023-24 ...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 21.06) 35 to 95 Sqmm ESCOMs SR 2023-24 Item code 21.06 (Labour ...

Aluminium End Terminal (Lug) 60) Aluminium End Terminal (Lug) 60.01) 10 Sqmm ESCOMs SR 2023-24 Item code 60.01 (Material Cost)

Aluminium End Terminal (Lug) 60) Aluminium End Terminal (Lug) 60.02) 16 Sqmm ESCOMs SR 2023-24 Item code 60.02 (Material Cost)

Aluminium End Terminal (Lug) 60) Aluminium End Terminal (Lug) 60.06) 70 Sqmm ESCOMs SR 2023-24 Item code 60.06 (Material Cost)

Aluminium End Terminal (Lug) 60) Aluminium End Terminal (Lug) 60.06) 95 Sqmm ESCOMs SR 2023-24 Item code 60.06 (Material Cost)

Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO...

Supply, Erection, testing and commissioning of AMF panel suitable for kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom glan...

Aluminium End Terminal (Lug) 60) Aluminium End Terminal (Lug) 60.07) 95 Sqmm ESCOMs SR 2023-24 Item code 60.07 (Material Cost)

GI strip GI/Copper strips for grounding connections, using necessary fixing materials as required 12.58.6) 600 x 600 x 3 mm GI Plate PWD Ele SR 2023-24 Page No.53 Item code 12.58.6

GI strip GI/Copper strips for grounding connections, using necessaryfixing materials as required 12.58.7) 25 x 3 mm Copper strip PWD Ele SR 2023-24 Page No.53 Item code 12.58.7

GI strip GI/Copper strips for grounding connections, using necessary fixing materials as required 12.58.11) 600 x 600 x 3 mm Copper plate PWD Ele SR 2023-24 Page No.53 Item code 12.58.11

Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on henolic/FRP/DMC insulator which are mo...

Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on henolic/FRP/DMC insulator which are m...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5.41.1...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection of O...

Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer PWD Ele SR 2023-24 Page No.19 Item code 5.36

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. 4.6.2) Single Arm Bracket with 1500 m...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Hylum plastic sheet Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. PWD Ele ...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.7.2) 32AmpsPWD Ele SR 2023-24 Page No.13 Item code 5.7.2

Supply and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947.5.13.2) ...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120ec setting. PWD Ele SR 2023-24 Page No.20 Item code 5.4...

Supplying heavy gauge PVC conduit pipe ...... mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. Th...

Pot Head Sl No 35)Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable item no. 35.01) Up to 4C x 50 Sqmm

Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...

Providing and laying in position Reinforced cement concrete for all foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine ...

6) Double Pole Transformer Structure complete with cross arms, braces, clamps, bolts & nuts and washers including 2 No of Poles Item No.6(a)For 25/63/100 kVA 4/5 Star Rated Transformer on PSCC Pole - ...

6) Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding Item No.4(a)9M RCC Pole Hescom SR 2023-24 (Material Charges)

6) Double Pole Transformer Structure complete with cross arms, braces, clamps, bolts & nuts and washers including 2 No of Poles Item No.6(a)For 25/63/100 kVA 4/5 Star Rated Transformer on PSCC Pole - ...

6) Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding Item No.4(a)9M RCC Pole Hescom SR 2023-24 (Labour Charges)

9) 11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS a) For RCC Pole For RCC Pole item no.9 a) ,Hescom SR 2023-24 (Material Charges)

9) 11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS a) For RCC Pole For RCC Pole item no.9 a) ,Hescom SR 2023-24 (Labour Charges)

6 ) Insulator as per IS-1445 for Ceremic, IS- 7935 for GI Pin, IEC-61109 for Polymeric 6.06 )11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) item no.6.06. Hescom SR 202-24 (Material...

6 ) Insulator as per IS-1445 for Ceremic, IS- 7935 for GI Pin, IEC-61109 for Polymeric 6.09 )1DISC Insulator 45 kN Porcelain item no.6.09. Hescom SR 202-24 (Material Charges)

12) Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 A) OPEN BUSHING TYPE 12.06)100 kVA, Aluminium Wdg, Star 2 (5 Star) item no.12.06) Hescom ...

8) Erection of Transformer & Structures 8.02)Erection of 100 kVA Transformer item no8.02) page no.3 Hescom SR 2023-24 (Labour Charges)

24) GOS as per IS-9921, IS-1977 24.01) 11 kV, 200 Amps Single Break GOS (Dwg No.BESCOM/GM/QS&S/23 Dtd 24.11.2018) item no. 24.01) Hescom SR 2023-24 (Material Charges)

13) Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc., 13.02) Fixing of GOS including wiring (11 kV Single Break 200 Amps). item no. 13.02) Hescom SR 2023-24 (Labour Charges)

24) GOS as per IS-9921, IS-1977 Item No 24.07) H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) -GI Item No.24.07 Hescom S...

4) Erection of Single Pole Mounted Transformer Structure For 100 kVA on the existing 9 Mtr RCC Pole (Squre Section) (excluding erection of Pole) item No.4.05 Hescom SR 2023-24 (Labour Charges)

68) Miscellaneous Materials 68.17) Caution/Danger Board item no. 68.17 ) Hescom SR 2023-24 (Material Charges)

5) Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc., 5.15) Fixing Danger Board item no. 5.015 ) Hescom SR 2023-24 (Labour Charges)

7) ACSR Conductor as per IS-398 (Part - 2/1996) 7.02 )Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM Item no 7.02 Hescom SR 2023-24 (Material Carges)

6) Stringing of Conductor 6.02) Stringing of conductor Rabbit ACSR binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.Item no 6.02 Hescom SR ...

4 ) Anti Climbing Device 4.02) GI Barbed wire (12 Mtr/Kg) item no.4.02) page no. 3 Hescom SR 2023-24 (Material Charges)

5) Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc., 5.15) GI Barbed Wire (12 Mtr) item no. 5.15 ) Hescom SR 2023-24 (Labour Charges)

8) Guy Wire & GI Wire as per IS-2141 item no.8.02) 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM Hescom SR 2023-24 (Material Charges)

Fixing of cross arms single top support EG Stirrups, Anticlimbing Device Guy Set Guarding etc 5 10) Fixing of Guy set with break insulator making use of 7/3.15mm (7/10 SWG) galvanised steel wire with ...

19 )Lightning Arrester as per IEC-60099-4 Item No 19.01) 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR (Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007) Hescom SR 2023-24 ...

13) Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc.,13.06) Fixing of 3 Nos Lightning Arrestor including wiring Hescom SR 2023-24 (Labour Charges)

17) LT Protection Item No 17.01) LT Protection Kit (Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018) Hescom SR 2023-24 (Material Charges)

15) Street Light and Other Works Item No 15.03) Fixing of LT Protection Kit Hescom SR 2023-24 (Labour Charges)

49) 1.1 KV Class HR (Heat Resistant) PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010 Item No) 49.04 PVC Wire - 50 Sqmm Al Wt: 13.8 Kg, Total Wt: 2...

60) Aluminium End Terminal (Lug)Item No) 60.05) 50 Sqmm Hescom SR 2021-22 (Material Charges)

9) PG Clamp 9.02) Rabbit to Rabbit Page No 3 Hescom SR2023-24 (Material Charges)

31 ) LT Line Spacer 31.01) For 4 Wire Hescom SR 2023-24 (Material Charges)

15) Street Light and Other Works 15.04 ) Wiring of 1 Circuit of LT Wiring for for 25/63/100 kVA DTC to the existing LT protection Kit/Distribution Box via metering box. (includes fixing of necessary s...

64 )For Distribution Transformer Centre (DTC) MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps, with associated LT CT 0.5 Accuracy Class, ring type, with wiring

Clamps, B&N and all other accesso...

15) Street Light and Other Works 15.02) Fixing of LT Metering Box with clamping arrangement for mounting on the Transformer structure with necessary terminal strip and CT mounting arrangement for hou...

20 ) HG Fuse Unit as per IS-5350 Part-2 item no.20.01 ) 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/ GM/QS&S/21 Dtd 24.11.2018 Hescom SR 2023-24 (Material Charges)

13) Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc., 13.02) Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring item no. 13.01) Hescom SR 2023-24 (La...

pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 36.01) 95 Sqmm, (54 GI Wires - 2.5 mm Dia) Hescom SR 2021-22 (Material C...

21) Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff, 21.01) 3x95 to 150 Sqmm Hescom SR 2023-24 (Labour Charges)

36) 11 kV, Jointing & Cable Termination Kit as per IS-13573 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 45.07) 3x95 Sqmm Page No 10 Hescom SR 2021-22 (Material Charges)

22) Cable Joint and wiring (for HT & LT UG Cable) HT UG Cable Making and Fixing pot head for HT Cable only Heat shrinkable Type Terminations 22.04 ) 3x95 to 3x150 Sqmm Hescom SR 2023-24 (Labour Ch...

68) Miscellaneous Materials 68.02 )RCC Hume Pipe 2000 mm long 200 mm Dia Hescom SR 2023-24 (Material Charges)

68) Miscellaneous Materials 68.02 )Collars for RCC Hume Pipe 150 mm Dia Hescom SR 2023-24 (Material Charges)

28) Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete 28.06 ) RCC Pipe Hescom SR 2023-24 (Labour Charges)

49) GI Pipe, 150 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB COST DATA SHEET - 23 Hescom SR 2021-22 (Material Charges)

52 ) Alkathine tube 52.01 ) Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr Hescom SR 2023-24 (Material Charges)

26) Concreting with Material & Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR...

26) Concreting with Material & Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR...

FIRE EXTINGUSHER, firequip Portable Fire Extinguishersas per IS 15683 (2018) High Pressure Extinguisher (Service Pressure 19 bar) Carbon Dioxide Based (as per IS 15222) Class -B, 4.5kg

LPG / PNG GAS CYLINDERS, LPG / PNG gas cylinder 14.2kg as per specification

Supply of fabricated Main Furnace:

Supply of Fabricated main frame for housing refractory bricks and other equipment, Furnace the main door, Furnace supporting frame, Main door lifting mechanism by hy...

Supply of Refractory Materials

Supply, Installation, Testing, & Commissioning of refractory items such as ceramic fiber blankets, insulation bricks, Hot Zone bricks (IS8), Cold Zone bricks (IS6), body...

Supply of Gas Fired System

Gas burners (REILO make 160KW or any other standard make) of fully automatic in operation and Suitable for cremation in all respect. Having 4 nos in the chamber with all oth...

Supply, Installation, Testing, & Commissioning of Body Charging Trolley

Supply of fabricated Hydraulically operated Body Charging Trolley with power pack and connecting pipelines and control desk to o...

Electrical Remote control panel

Main incoming switch (MCCB), Motor operating contractors with MCB / relay, indicating lamps, pushbuttons, voltmeter, Ammeter, temperature controller, control wiring, t...

Control & Power Cables

The control and power cables laying & termination to connected equipment of furnace, Including isolators near the equipment as per Electrical inspectorate guidelines. Earthing a...

Supply, Instal\ation, Testing, & Commissioning of Water

pump Supply of water pump for scrubber unit.1 Hp motor, 3 Phase, 415V, for circulating the water in wet venture scrubber unit and necessary pip...

Supply, Installation, Testing, & Commissioning of Fresh air blower made out of M S Sheet, direct driven motor of 1 Hp, 3 Phase, 415V, of suitable capacities, mounted on a M S rigid angle frame, conne...

Supply, Installation, Testing, & Commissioning of Scrubber unit

Wet scrubber unit with venturi arrangements made out of S S 304G sheets. In unit-1 smoke will completely come in contact with water and ...

Supply, Installation, Testing, & Commissioning of online- exhaust Blower Fabricated with an S S 304G sheet, the impeller driving shaft is also made out of S S with bearing support mounted on a suitabl...

Erection charges for Erection, testing, commissioning, handing over the cremation furnace (a) Fixing of Frame, Main Door, Counterweight, Mechanical and Electrical operating door system.(b) Refractory ...

Packing, forwarding, Loading, and Unloading charges from our factory in Bangalore to the crematorium site.

Supply, Installation, Testing, & Commissioning of Self-supporting chimney.

The chimney is made out of M S Plates, angles, flats, giouting bolts & gusset plates, ladder, platform with a protection cage...