MP Fund 2026 27 Supply and Installation of Energy Efficient LED High Mast Light 1No at Ward No 5 Kulam near In Thiruporur Town Panchayat

Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. Complying with Standard Specifications as per SS 20 B TNDSS No. 23 & 24 V,VI,S2

Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with Standard Specifications

Supply and fabrication and placing in position of TMT steel rods to required size and length as directed by the departmental officers including cost of binding wire, cutting, bending and tying with proper position etc., including cost and conveyance of all materials to site and all labour charges etc., complete Complying with Standard Specification

Supplying and errecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using M.S Sheets of size 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete Complying with Standard Specification

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggrigate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc..,Complete Complying with Standard Specifications

Supply, Installation,Design, Fabrication, Testing and commissioning of 12.00 Mtr Mini High Mast Light System with all acessories mast shaft fully hot dip galvanized and should with stand velocity of 160k per Hour without gear box and power tool with lantern carriage ring etc., complete set as per standard specification, with necessary automatic 'ON' and OFF switch preset Timer arrangements out going MCBs for controls and earthing arrangements as per relevant IS Specification arrangements for cables, lantern carriage with necessary holdings arrangements to hold 6 nos of 150Watts Led fittings with necessary central cable box arrangements suitable size electrical cabling arrangements from feeder pillar box to all 150Watts LED fittings as per relevant I.E and I.S specification. cabling arrangements Necessary earthing should be done where ever necessary as per IS rules cable arrangements and suitable type of R.C.C foundation considering the S.B.C of soil 10 Tones Earth work excavation R.C.C work centering foundation bold and nut manufacturing in special steel with necessary anchor plate and templates including all materials and labour charges all taxes and conveyance, lantern carriage and other fittings as per relevant IS specification etc., complete (PWD SOR 2025-2026 Page No.259 vol-1

Supply and fixing of Service Connection accessories LT 1100V PVC Aluminium armoured under ground cable with ISI MARK 31/2 Core 35 sq.mm. PVC Armoured UG Cable including all materials and labour charges all taxes and conveyance, lantern carriage and other fittings as per relevant IS specification etc., complete (PWD SOR 2025-2026 vol-1 Page No.227

Supplying and Refilling in foundation and Refilling with other than sand basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.