Construction of LWSS Sohari Takoli in Tehsil Bangana Distt. Una (HP)

Excavation in foundation trenches etc. in earth work in all kind of soil such as pick work,jumper work, blasting work in hard & soft rock and chiesaling work including slushy soil & under flooring water up to all excavated soil up to any lead & lifts from the edge of excavation and then depth and stacking the returning the stacked soil in 15 CM ( fifteen centimetres) layer's when required in to plinth sides of foundation etc. Consolidation each diposited layer by ramming & watering & then disposing of all surplus excavated earth as directed with in all lead of 20 meters in Chiselling /wedging out of rock complete in all respect.

Providing form work with steel plates 3.15milimetres thick welded with angle iron in frame 30x30x5mm So as give a fair finish including centring shuttering , strutting and propping etc. with wooden battans & ballies, height of propping & centring below supporting floor to celing not exceeding 4.00 metres & removal of the same for in situ reinforced concrete & plain concrete work in :-

Foundation footing basis of columns etc. and mass concrete.

Providing and laying cement concrete 1:4:8 mix (one cement :Four sand :Eight stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in Retaining wall as per direction of Engineer- in-Charge with in all lead & lifts.

IInd class brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:4 ( 1 cement:4 sand ) in all leads and lifts as per the direction of the Engineer-in-Charge.

Providing and laying cement concrete 1:2:4 ( 1cement : 2 sand : 4 graded stone aggregate 20 mm nominal size ) and curing complete excluding the cost of form work and reingorcement for reinforced concrete work in suspended floors, roofs,landing and shelves and their support balconies,beams,girders,bressumers and cantilevers upto floor to level complete in all respect i/c carriage of materials with in all leads and lifts.

Fixing of fencing panel in boundary wall of size 1.80x1.20m of jali (Expended metal) 25x25mm mesh of 3.15 mm thick and welded to M.S. black tube 32 mm dia of 14 gauge with M.S. flat cover 20x3mm, M.S. hold fast made out of M.S. flat 32x3mm including cutting welding, painting with red oxide paint (the fencing panel shall be measured and paid for separetly)