Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.9 LAccepted-AOC | ₹24.9 L | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹27.0 LRejected-AOC | ₹27.0 L | L2 | Rejected-AOC Not L1 Bidder |
| 3 | L3₹35.4 LRejected-AOC 114 SHASTRI NAGAR MEERUT | MEERUT | UTTAR PRADESH | 245206 | ₹35.4 L | L3 | Rejected-AOC Not L1 Bidder |
| 4 | L4₹44.2 LRejected-AOC RCP GURUDWARA ROAD WARD NO 29 SURATGARH SRI GANGANAGAR 335804 | SURATGARH | SRI GANGANAGAR | RAJASTHAN | 335804 | ₹44.2 L | L4 | Rejected-AOC Not L1 Bidder |
| 5 | L5₹48.5 LRejected-AOC H NO 1 ARYA LANE SECTOR 13 HISAR HARYANA 125001 | HISAR | HISAR | HARYANA | 125001 | ₹48.5 L | L5 | Rejected-AOC Not L1 Bidder |
| Sl No | Description | Qty | Unit | vardhman traders L1 | SRI SAI CONSTRUCTION COMPANY L4 | JAIN TRADERS L3 | Khatri Trunk Factory L2 | MAHIPAL CONSTRUCTION COMPANY L5 |
|---|---|---|---|---|---|---|---|---|
| .10Notes:- (i) 100 percent/variation of items of nonperishable items of the work as per site requirement of Engineer-in-Charge shall be deposited by the L1 bidder within 30 days after placing of work order. (ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE. (iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge. (iv) Material obtained from demolition/dismantled and the serviceable material (other than reused in the work) shall be the property of the Govt and shall be removed and deposited in the MES Store Yard without any extra cost to Govt. (v) In case of non-availability of any make mentioned under list of Makes, the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern authorised dealers and submitted to Accepting Officer. In such case the L1 bidder shall be incorporated Group-X category makes as approved by HQ CE SWC Jaipur in the works after prior approval of Accepting Officer. (vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR’s and Final Bill. (vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work. (viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder. | ||||||||
| 1.00Taking out carefully following old unserviceable parts of ALMIRAH LARGE STEEL WITH SHELVES and M & L for replacing with new parts as per existing or as per drawing :- FD-1031 | ||||||||
| 1.01 | Removing unsv & S & F shelves with appropriate G type clamp/nuts bolts all as specified and directed by Engineer-in-Charge. | 45 | Each | 10 ₹450 | 500 ₹22,500 | 120 ₹5,400 | 175 ₹7,875 | 80 ₹3,600 |
| 1.02 | Removing unsv & S & F locks(Make-HARRISON/GODREJ/LINK) with duplicate key & hole cover. | 80 | Each | 90 ₹7,200 | 200 ₹16,000 | 130 ₹10,400 | 225 ₹18,000 | 150 ₹12,000 |
| 1.03 | Removing unsv & S & F steel anodized handles 4” grip as per sample. | 95 | Each | 50 ₹4,750 | 80 ₹7,600 | 60 ₹5,700 | 25 ₹2,375 | 125 ₹11,875 |
| 1.04 | Removing unsv & S & F 3 way locking system made out of 10mm dia mild steel rod to almirah large steel | 40 | Each | 30 ₹1,200 | 100 ₹4,000 | 90 ₹3,600 | 50 ₹2,000 | 200 ₹8,000 |
| 1.05 | Legs of Almirah large steel made out of 1.00 mm thick PBI sheet including painting with of two coat of synthetic enamel paint . | 60 | Each | 100 ₹6,000 | 200 ₹12,000 | 280 ₹16,800 | 125 ₹7,500 | 2,500 ₹1.5 L |
| 1.06 | M& L for replacement of hinges 75mm long | 120 | Each | 10 ₹1,200 | 60 ₹7,200 | 25 ₹3,000 | 25 ₹3,000 | 50 ₹6,000 |
| 1.07 | M & L for denting & painting Almirah both internally and externally with two coat synthetic enameled paint of BLACK / OG/ Silver Gery colour over a coat of zinc chrome red oxide primer as directed by Engr-in-Charge with spray gun / brush after properly smoothening the surface with the help of an electric grinder,applying putty on dents complete all as specified and directed by Engineer-in-Charge. | 135 | Each | 280 ₹37,800 | 500 ₹67,500 | 360 ₹48,600 | 425 ₹57,375 | 200 ₹27,000 |
| 2.00Taking out carefully following old unserviceable parts of ALMIRAH LARGE STEEL and M & L for replacing with new parts as per existing or as per drawing :- FD/E6/MAP/18 | ||||||||
Updated dates
Tender Value
₹49.0 L
EMD Value
₹97,960
Closing Date
19 Nov 2025, 6:00 pmClosed
GE (A) Suratgarh
Suratgarh Mil Stn
REPAIR, RECANNING AND PAINTING TO STEEL CHAIRS AND CERTAIN STEEL FURNITURE AT GE (A) SURATGARH
2025_MES_724940_2
GE (A) SOG Token No 30/25-26
Open Tender
Miscellaneous Works
120 days
Suratgarh
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (A) Suratgarh
₹97,960
Yes
17 Jan 2026
29 Oct 2025
21 Nov 2025
29 Oct 2025
19 Nov 2025
5 Nov 2025
Amount
Taking out carefully following old unserviceable parts of ALMIRAH LARGE STEEL WITH SHELVES and M & L for replacing with new parts as per existing or as per drawing :- FD-1031
Removing unsv & S & F shelves with appropriate G type clamp/nuts bolts all as specified and directed by Engineer-in-Charge.
Removing unsv & S & F locks(Make-HARRISON/GODREJ/LINK) with duplicate key & hole cover.
Removing unsv & S & F steel anodized handles 4” grip as per sample.
Removing unsv & S & F 3 way locking system made out of 10mm dia mild steel rod to almirah large steel
Legs of Almirah large steel made out of 1.00 mm thick PBI sheet including painting with of two coat of synthetic enamel paint .
M& L for replacement of hinges 75mm long
M & L for denting & painting Almirah both internally and externally with two coat synthetic enameled paint of BLACK / OG/ Silver Gery colour over a coat of zinc chrome red oxide primer as directed by Engr-in-Charge with spray gun / brush after properly smoothening the surface with the help of an electric grinder,applying putty on dents complete all as specified and directed by Engineer-in-Charge.
Taking out carefully following old unserviceable parts of ALMIRAH LARGE STEEL and M & L for replacing with new parts as per existing or as per drawing :- FD/E6/MAP/18
Removing unsv & S & F shelves with appropriate G type clamp/nuts bolts all as specified and directed by Engineer-in-Charge.
Removing unsv & S & F locks(Make-HARRISON/GODREJ/LINK) with duplicate key & hole cover.
Removing unsv & S & F steel anodized handles 4” grip as per sample.
Removing unsv & S & F 3 way locking system made out of 10mm dia mild steel rod to almirah large steel
Legs of Almirah large steel made out of 1.00 mm thick PBI sheet including painting with two coat of synthetic enamel paint .
M& L for replacement of Hinges 75mm long
M & L for denting & painting Almirah both internally and externally with two coat synthetic enamelled paint of BLACK / OG/ Silver Gery colour over a coat of zinc chrome red oxide primer as directed by Engr-in-Charge with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents complete all as specified and directed by Engineer-in-Charge.
Taking out carefully following old unserviceable parts of ALMIRAH MEDIUM STEEL WITH SHELVES and M & L for replacing with new parts as per existing or as per drawing :- FD-1032
Removing unsv & S & F shelves with appropriate G type clamp/nuts bolts all as specified and directed by Engineer-in-Charge.
Removing unsv & S & F locks(Make-HARRISON/GODREJ/LINK) with duplicate key & hole cover.
Removing unsv & S & F steel anodized handles 4” grip as per sample.
Removing unsv & S & F 3 way locking system made out of 10mm dia mild steel rod to almirah large steel
Legs of Almirah large steel made out of 1.00 mm thick PBI sheet including painting with of synthetic enamel paint .
M& L for replacement of Hinges 75mm long for fixing the existing shutter of Almirah Med
M & L for denting & painting Almirah both internally and externally with two coat synthetic enamelled paint of BLACK / OG/ Silver Gery colour as directed by Engr-in-Charge with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
Taking out carefully following old unserviceable parts of BOOK CASE STEEL GLAZED and M & L for replacing with new parts as per existing or as per drawing :- FD-1028
Removing unsv & S & F shelves & shutters with appropriate nuts bolts all as specified and directed by Engineer-in-Charge.
Removing unsv & S & F locks(Make-HARRISON/GODREJ/LINK),with duplicate key.
Removing unsv & S & F steel anodized handles as per sample.
Removing unsv & S & F 3mm thick glass of the shutters and smoothening the movement thereof.
M & L for denting & painting Almirah both internally and externally with two coat synthetic enamelled paint of GREY/OG colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
Taking out carefully following old unserviceable parts of LOCKER BEDSIDE STEEL and M & L for replacing with new parts as per existing or as per drawing :- :FD-257, FD-1029
M & L for Denting & painting of locker with two coat synthetic enamelled paint of BLACK/OG/Silver GRey as directed by Engr-in-Charge colour after preperation of surface by cleaning & smoothening with electric grinder & applying putty/primer where necessary complete all as specified/shown on drg & directed by Engr-in-Charge.
Removing unsv & S & F hasp & staples 75mm long as per drg.
Removing unsv & S & F MS steel CP handles 100mm long as per drg.
S & F CP steel conduit 19/20mm dia hanging rod with brackets16 guage as per drg.
Removing unsv & S & F shelves all as per drg.
Removing of unsv & S&F of Legs made out of 1.00 mm thick PBI sheet including painting with of synthetic enamel paint
M& L for replacement of Hinges 75mm long for fixing the existing shutter of Locker Steel
Taking out carefully following old unserviceable parts of CHAIR VERANDAH and M & L for replacing with new parts as per existing or as per drawing :- FD-333,256,
Removing unsv & M & L for recanning the chair with plastic cane 3.5mm to 4mm wide, 0.4 mm thick half round, white colour, (MAT Pattern),(GAREWARE/MPI/SHAH/PREMIER) complete all as specified & directed.Canning shall be done only after painting.
M & L for painting the frame of the chairs by one coat of synthetic enamel white of approved quality after scrapping off the existing worn out paint with an electric grinder and required welding work (if any) complete all as specified & directed.
Removing unsv & Supply and Fixing PVC shoes .
Taking out carefully following old unserviceable parts of CHAIR VERANDAH PVC SEAT & BACK and M & L for replacing with new parts as per existing or as per drawing :-: FD/MAP-II/06
Removing unsv & S&F of Seat of Chair Verandha as per sample apporved
Removing unsv & S&F of Back of Chair verandha as per sample apporved
M & L for painting the frame of the chairs by one coat of synthetic enamel white of approved quality after scrapping off the existing worn out paint with an electric grinder and required welding work (if any) complete all as specified & directed.
Removing unsv & Supply and Fixing PVC shoes .
Taking out carefully following old unserviceable parts of TABLE OFFICE OFFRS STEEL and M & L for replacing with new parts as per existing or as per drawing :- FD-1003 & 84
Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade & texture as approved by Engr-in-Charge both side lamination with teakwood edging matching the color of the top.
Removing unsv & S & F new drawers alongwith lock complete all as per drawing.
Removing unsv & S & F new cabinet alongwith lock complete all as per drawing.
M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
Removing unsv & S & F hard rubber shoes to legs
Taking out carefully following old unserviceable parts of TABLE OFFICE CLERK STEEL and M & L for replacing with new parts as per existing or as per drawing :- FD-1004 & 84
Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade & texture as approved by Engr-in-Charge both side lamination with teakwood edging matching the color of the top.
Removing unsv & S & F new drawers alongwith lock complete all as per drawing.
Removing unsv & S & F new cabinet alongwith lock complete all as per drawing.
M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
Removing unsv & S & F hard rubber shoes to legs
Taking out carefully following old unserviceable parts of TABLE 3'X2' WITH DRAWER STEEL and M & L for replacing with new parts as per existing or as per drawing :- : FD-1008
Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade & Texture as approved by Engr-in-Charge both side lamination with teakwood edging matching the color of the top.
Removing unsv & S & F new drawers & cabinet all as per drawing.
M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
Removing unsv & S & F hard rubber shoes to legs
Removing unsv & S & F 25mm square MS pipe 1.6mm thick for steel including welding work including two coat synthetic enamel paint over a coat of red oxide primer complete all as per drawing.
Taking out carefully following old unserviceable parts of TABLE 3'X2' WITHOUT DRAWER STEEL and M & L for replacing with new parts as per existing or as per drawing :- : FD-1007
Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade & Texture as approved by Engr-in-Charge both side lamination with teakwood edging matching the color of the top.
M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
S & F hard rubber shoes to legs.
Supplying & fixing the following parts of CHAIR WRITING in replacement of the old existing unserviceable parts of the chair as approved, shown on drawing & as directed by Engr-in-Charge :- MAP :- FD/E6/MAP/12
Removing of old unsv seat & S&F of Seat of 12 mm thick hot pressed plywood upholstered with fabric as approved by Engr-in-Charge & moulded polyurethane foam with PVC libing all around.The cushions shall be of 40 density, 75mm thick for seat.
Removing of old unsv back and S&F of back of 12 mm thick hot pressed plywood upholstered with fabric as approved by Engr-in-Charge & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density 50 mm thick for back alongwith the fabric of approved quality & color complete all as directed by Engr-in-Charge.
M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
Removing and Change of Tapestry cloth of Seat & Back of chair writing MAP as approved & directed by Engr-in-Charge
Handrest to match with existing all in shape, size, material & quality.
S&F Rubber stoppers complete all as per drawing
Taking out carefully following old unserviceable parts of TABLE 900X900mm and M & L for replacing with new parts as per existing or as per drawing :-: FD-1009
Top of PRELAMINATED MDF board 18/19mm thick with matching PVC edging in shade as approved covering both the faces.
Material & labour for painting all over the steel structure with two coat synthetic enamelled paint of BLACK/BROWN colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge.
Hard rubber shoes for legs
Taking out carefully following old unserviceable parts of TEAPOY VARANDHA/TEAPOY VARANDHA MAP STEEL and M & L for replacing with new parts as per existing or as per drawing :- FD-20//255/383/ FD/E6/MAP/17
S & F of unsv Top of PRELAMINATED MDF board 18/19mm thick with matching Teak wood edging in shade & texture as approved by Engr-in-Charge
Material & labour for painting all over the steel structure with two coat synthetic enamelled paint of BLACK/WHITE colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge.
Hard rubber shoes for legs
Taking out carefully following old unserviceable parts of CHAIR SCHOOL WITH HAND BOARD and M & L for replacing with new parts as per existing or as per drawing :-:- FD/E6/MAP/05
S & F blowplastic one piece seat & back
S & F writing rest made out of 18mm thick prelaminated MDF board same as existing.
Rubber/PVC shoes
Painting to the steel structure of two coat of synthetic enamel paint of black colour after removing the old wornout paint all as specified by Engr-in-Charge,
TRESTLE STORE ROOM STEEL FD-1043
Material & labour for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder after completeing welding work (if any) with workmanship and rest complete all as specified & directed by Engineer-in-Charge. Note: Painting work shall carried out in unit location
Taking out carefully following old unserviceable parts of TABLE BED SIDE MAP and M & L for replacing with new parts as per existing or as per drawing :- FD/MAP/15(R )
Removing of old unsv top (450x450mm) of table bed side and replace with 18mm prelaminated MDF board as approved by Engr-in-Charge with teek wood beeding complete all as per drawing
Removing of old unsv back (550x400mm) of table bed side and replace with 06 mm commersial ply BWR grade as approved by Engr-in-Charge with teek wood beeding complete all as per drawing
Removing of old unsv sides and S&F new sides made from 18mm thick exterior grade prelaminated MDF board (450 x 450mm) as approved shade and colour as well as should match existing parts of bed complete all as per drawing
Removing of old unsv drawers and S&F new drawers with telescopic channel complete all as per drawing and directed.
S & F of handles as approved by Engr-in-Charge
Material & labour for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder after completeing welding work (if any) with workmanship and rest complete all as specified & directed by Engineer-in-Charge.
S & Fixing of PVC/Rubber shoe for legs
Removing unsv & S & F 25mm square MS pipe 1.6mm thick for steel including welding work including two coat synthetic enamel paint over a coat of red oxide primer complete all as per drawing.
Taking out carefully following old unserviceable parts of TABLE DINING OR STEEL and M & L for replacing with new parts as per existing or as per drawing :- FD-165(M)
Repair to table dining OR's including replacement of UNSV existing top with 18/19mm thick block board with 22 gauge aluminium sheet (1975x750) on top of Board to be properly fix.
Required welding work on the steel frame structure as per Engr-in-charge direction and the Steel frame of the table shall be painted with two coat of synthetic enameled paint BLACK colour after properly smoothening the surface with sand paper complete all as directed by the Engineer-in-Charge.
S & Fixing of PVC/Rubber shoe for legs
RACK 3/4 SPACE STEEL FD-1023
M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK / OG/ IVORY colour with spray gun after properly smoothening the surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.
RACK STEEL 6 TIER FD-1038/1023/1036
M & L for painting all over the steel structure with two coat of synthetic enameled paint of BLACK / OG/ IVORY colour with spray gun after properly smoothening the surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.
Taking out carefully following old unserviceable parts of TABLE COMPUTER and M & L for replacing with new parts as per existing or as per drawing :-:- : FD/E6/MAP/03
Removing unsv Top of the Table and S & F of 18mm Prelaminated MDF Board approved shade and texture by Engr-in-Charge matching with PVC Edging all around the top of table.
Removing of unsv keyboard tray and S& F 18mm pre lamitated MDF board of keyboard tray as per drawing and fix with good quality of telescopic chanels.
Removing of unsv bottom tray and S&F of 18mm Pre laminated MDF board of bottom tray as per drg and as directed by Engr-in-Charge
S & F of nylon shoes hight adjustable type as approved by Engr-in-Charge
M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.
Taking out carefully following old unserviceable parts of CHAIR COMPUTER,CHAIR REVOLVING EXECUTIVE and M & L for replacing with new parts as per existing or as per drawing :-:- GODREJ,FD/E6/MAP/01
Removing unsv & S & F new seat of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & color.All as directed by Engr-in-Charge.
Removing unsv & S & Fnew Back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & color.All as directed by Engr-in-Charge.
Removing and Change of Tapestry cloth of Seat & Back of chair revolving as approved & directed by Engr-in-Charge
Removing unsv & S & F castor wheels as per the approved sample
Removing unsv & S & F handrest matching the previous all in shape,size,material & quality.
S & F pedestal assembly all matching the shape,size & quality of the previous.
Removing unsv & M & L for servicing synchro tilting mechanism.
Removing unsv & S&F of Hyduralic system as per drg and directed by Engr-in-charge
STOOL REVOLVING : FD-TP
Removing Unsv Seat cushion ands&F new seat cushion with 75mm thick cushion with approved tapestry cloth complet as per drawing and directed by Engr-in-charge
Removing old paint from steel surface and painted with two coat of synthetic enamel paint ( black colour) as directed by engr-in-charge rest all as per drg.
S&F Nylon Buffer / Shoes
CHAIR CB WITH ARM: FD-75(M)
Removing of old unsv Seat & Back of Chair CB steel with arms and S&F of new seat & back made out of Teak wood frame polished with clear Varnish after smoothly finishing and preparation of wooden surface with grinder and sand paper duly caned with 2 to 2.5 mm wide plastic cane except border which shall be 3mm thick flat plastic cane of approved quality & make including fixing with machine screw 4mm dia and 75mm long with nuts and washers through holes in the complete all as specified and as sper drawing and directed by Engineer-in-Charge
Removing of old Unsv wooden handle of Chair CB and S&F new handle as approved with screw complete all as per drawing and directed by Engr-in-charge.
Removing of old paint from the steel frame with electric grinder and applying of two coats of synthetic enamel paint over a coat of primer as approved colour shade rest all as per drawing and directed by Engr-in-charge.
S&F of PVC shoe as per drawing
CHAIR CB WITHOUT ARM: FD-75(M)
Removing of old unsv Seat & Back of Chair CB steel without arms and Fixing of new seat & back made out of Teak wood frame polished with clear Varnish after smoothly finishing and preparation of wooden surface with grinder and sand paper duly caned with 2 to 2.5 mm wide plastic cane except border which shall be 3mm thick flat plastic cane of approved quality & make including fixing with machine screw 4mm dia and 75mm long with nuts and washers through holes in the complete all as specified and as per drawing and directed by Engineer-in-Charge
Removing of old paint from the steel frame with electric grinder and applying of two coats of synthetic enamel paint over a coat of primer as approved colour shade rest all as per drawing and directed by Engr-in-charge.
S&F of PVC shoe as per drawing
BENCH WORKSHOP 1500X900X760MM & 1800x900x760MM :FD-1024
Removing of old unsv wooden planks and S&F new plank of Sheesham hard wood planks (1500x900x40) which shall be of length 1500mm and width shall be 100mm per planks 40mm thick joined all together complete all as per drg. Each bench wksp shall be fitted with 3 nos of planks Planks shall be smoothly surface finished and 3 coats of oil painted. Planks shall be properly fitted with required size of nut and bolts .
Removing of old unsv wooden planks and S&F new plank of Sheesham hard wood planks (1800x900x40) which shall be of length 1500mm and width shall be 100mm per planks 40mm thick joined all together complete all as per drg. Each bench wksp shall be fitted with 3 nos of planks . Planks shall be smoothly surface finished and 3 coats of oil painted. Planks shall be properly fitted with required size of nut and bolts .
Removing of old paint from the steel frame with electric grinder and applying of two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer as approved colour shade rest all as per drawing and directed by Engr-in-charge.
S&F of PVC shoe as per drawing
Khatri Trunk Factory (BID ID -3472756)
JAIN TRADERS (BID ID -3475790)
SRI SAI CONSTRUCTION COMPANY (BID ID -3472906)
MAHIPAL CONSTRUCTION COMPANY (BID ID -3475438)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
BOQ_825771.xls
BOQ • 0.40 MB
tender30.pdf
Tender Documents • 0.72 MB
Download all tender documents and submit your bid