8564 SPECIAL REPAIR TO BLDG NO P13 AT AIPT AND SPECIAL REPAIR TO BLDG NO SR66 RATION STORE OF 41 ADSR UNDER GEC PUNE AND SPECIAL REPAIRS REPLACEMENT OF 07 x 1.5 T SPLIT ACS AGAINST BER INSTALLED AT AIPT UNDER GE CPUNE AND SPECIAL RENEWAL

Amount

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area exc 1.50 Sqm but n-exc 4 Sqm each all as specified.

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area n.exc 1.50 Sqm each all as specified.

S&F pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

M&L for Cement concrete 1:3:6 type C1 (using 20mm graded stone aggregates) for filling of pressed steel frame and hold fast block cutting etc complete

S&F 40mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete as directed

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

S&F 150 mm extruded aluminium alloy door handles ,fabricated type complete all as specified.

S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed .

S&F stainless steel butt hinges 100mm, medium weight complete all as specified

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified

Supply & fixing Aluminium alloy anodised sliding door bolts with hasp and stapple (bolt type and fixing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section of 250mm long complete all as specified.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, tower bolts and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified

S&F 4.0mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified

Dismantling wrought iron or mild steel work of any description complete all as specified

Supply and fixing stainless steel wire cloth 0.71mm dia fixed with tinned tacks average width of aperture 1.18mm complete all as specified.

S&F expanded metal, (n.exc 4 kg per sqm) cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed to wood or steel members complete all as specified

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc. completed all as specified

M&L for preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of a red oxide primer complete all as specified

Demolition of cement concrete in ground floors and paving not exc 15 cm thick (below or above ground level) un-reinforced cleaning the premises and removal of rubbish out side the MD land at the location notified by Municipal authorities complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness laid,bedded and pointed in cement mortar in floors, aprons etc complete all as specified and directed.

Demolition of stone masonary/Block work and brick work built in cement morter of any description and removing of rubbish out side the Md land at the location notified by municipal authority. complete all as specified and directed..

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, old size built in CM 1:6 complete all as specified and directed.

M&L for block masonry with solid blocks of precast cement concrete class designation D-5 (using 20 mm graded stone aggregate) exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 using 40 mm graded stone aggregate of 75 mm thick as in plinth protection finished even and smooth without using extra cement including use of necessary form work complete all as specified & directed.

M&L for plain cement concrete (1:4:8) Type-D2 (using 40mm graded crushed stone aggregate) as in levelling course / sub base of flooring complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20- 25mm thick over and including 20mm thick screed bed in CM(1:4)cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Taking down plastering complete all as specified and as directed

M& L for dubbing out average 10mm thick on irregular face of walls in cement mortor 1:6 complete all as specified

M&L for rendering 10 mm thick on brick,block / stone masonry surfaces other than fair faces of brick work or stone surfaces in CM 1:6 complete all as specified

M&L for rendering 15mm thick in cement mortar 1:4 on brick/ stone surfaces finished even and smooth with spong finish complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of primer over external wall surface complete all as specified and directed

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

Complete removal of old decorated surface of wall including brooming down and cleaning the surface and applying two coat of cement base paint of approved tint all as specified and directed.

Complete removal of old decorated surface of walls including brooming down and cleaning the surfaces and applying two coat of distemper (Oil emulsion) of approved tint all as specified and directed.

M&L for preparation of old wooden surfaces and applying one coat of synthetic enamel paint all as specified.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote oil complete all as specified and directed.

Dismantling of single layer of manglore pattern or similar tiles in roofing including ridges, hips, complete all as specified and as directed.

Dismantling of battens for tiles, shingles etc, of any size and description spaced exc 15 cm including tiling fillets complete all as specified and as directed.

Dismantling timber scantling, framed in post, rafters, purlines etc over 40 sqcm in section complete all as specified and as directed.

Dismantling ceiling/boarding of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and as directed.

M&L for 2nd class soft wood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified

M&L for 8 mm thick one side laminated gypsum ceiling board for false ceiling on aluminium powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 2.0 mm dia GI wire/ 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa with AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa with AZ 150 as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws complete all as specified and directed.

M&L for MS structural steel work, framed as in trusses purlins, rafter, post etc conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and as directed,

Taking down of existing Ceilling fan of any size and sweep and keeping safe custody and refixing the same existing place with serviceable condition by minor repairs such as capacitor replacement, bearing repalcement and painting, clamping of fan rod to roof iron channel, required down rod upto 8 feet, rewiring of fans complete as per site requirement complete all as specified and as directed. Note : The quoted rate shall include the rates of spares and rewiring of fan mentioned above.

M&L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked in PVC casing caping 25mm wide ISI marked including all accessories etc. with PVC modular boxes/PVC Sunken Boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note:- The quoted rate shall include circuit wiring and taking down of copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc Making good of disturbed surfaces will be done by contractor without any extra claims.

One light point controlled by one switch complete all as specified and directed.

One fan/exhaust point controlled by one 5 Amps one way modular switch and modular regulator complete all as specified and directed.

two light point controlled by one switch

One 5/6 Amp socket controlled by one switch same board complete all as specified.

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

All as per item no. 48 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 5/15 Amps switch socket / Earth plug socket independent and connecting to common earth dolly complete all as specified.

S&F modular switch single pole one way 5/6 Amps including connection complete all as specified and as directed

S&F socket out let 5/ 6 Amps 3 pin modular type incl connection complete all as specified and as directed

S&F modular rotating step type electronic fan regulator( 5 step), 100W /240 volts two module incl connection complete all as specified and as directed

S&F modular socket twin type, 5 pin 6/16 Amps flush type incl connection complete all as specified and as directed

S&F modular switch type single pole one way 15/16 amps incl connection complete all as specified and as directed

S&F in repairs ceiling rose, surface, three terminals incl connection complete all as specified and as directed.

Supply and fixing in repairs round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified

Supply and fixing LED tube lights 4 feet fitting 1x 20W, 220V, Ac aluminium housing body connecting up with flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed..

Supply and fix LED in repairs building security light 30 W IP 66 pressure die cast aluminium housing with GI bracket of suitable size complete including clamps , screws etc and dia complete all as specified and directed

S&F in repairs of MCB SPN DB 8 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail ,230 Volts with double door including taking down old unsv DB and making the the surface good to match with adjucent complete all as specified and as directed

S&F of MCB SPN DB 12 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail ,230 Volts with double door including taking down old unsv DB and making the surface good to match with adjucent complete all as specified and as directed

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl galvanised iron wire 4mm as earthing lead and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit with cover incl excavation and earth work in any type of soil and testing complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.complete all as specified and directed.

SP 5 To 32 AMP

SPN 40 AMP

Supply, laying and testing cable XLPE Insulated ,galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 2 core complete all as specified and directed.

M & L for Cutting of road/hard standing and making good with PCC (1:2:4) using 20mm graded stone aggregate complete all as specified and directed.

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of LT UG cable/poles etc in soft/loose soil and getting out complete all as specified and directed.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm complete all as specified and directed..

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point for any type of excavation. complete all as specified and directed.

M&L for DWC pipe 50 mm dia to be lay in trench by passing cable complete all as specified and directed

Supply and laying /fixing on wall 40 mm GI pipe light grade with and incl all fittings such as bends, elbows, tees short pieces, union etc in trenches or fixing on wall complete all as specified and directed.

Taking down ceiling fan, downrod, clamps, sealing cable end, dismantling blades and removing fan and bladesand downrod to MES store all as directed by Engr-in-Charge

Supply and fixing and hanging ceiling fans complete with blades, canopy,clamps, down rods of upto 4 feet as per ground situation, remote with battery and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including flexible 3 core copper cable conecting from ceiling rose to fan terminal complete all as specified and directed

Taking down of split AC both indoor and outdoor unit and deposit the same to the MES store yard ccomplete all as specified and directed.

Supply and install split AC outdoor and indoor (inverter type) complete with cordless remote unit with 5 Star rating and ISEER minimum 3.2 of capacity 1.5TR with all necessary connections including stand complete all as specified and directed. Note : The quoted rate shall include necessary cutting of hole and making good to the disturbed surfaces, copper tubing upto 10 feet, drain pipe extend upto ground level with fixing on wall with clamp complete all as specified and directed.

Supply and install wall mounted voltage stabilizer of capacity with voltage operation 170V -270V, 4 KVA range suitable for 1.5TR split AC including stand if any complete all as specified and directed.

S&F Sub main wiring with 2 runs of single core, 4 Sqmm PVC insulated, unsheathed, 1100 volts grade multi-stranded, copper conductor cables (FRLS H quality) drawn through PVC casing capping 25mm with fitting/accessories, fixed on roof, walls, ceiling etc including 4 Sqmm PVC insulated, unsheathed, single core, multistranded, copper conductor as earth continuity wire complete as specified and directed. Note : Rate includes (i) PVC casing capping and its accessories (ii) Two runs of cable and one run of earth wire of size 4 sqmm complete all as specified and directed.

Supply and fix AC box modular type consists of surface/sunken box with MCB 20A C series 10 KA plug top with indication complete all as specified and directed

Parhar Enterprise (BID ID -3288399)

M/S NAVNEET S MORDE (BID ID -3288522)

PRANAV ENTERPRISES (BID ID -3290650)

DURGA CONSTRUCTION & TRANSPORT (BID ID -3290906)

UNIQUE ENGINEERS (BID ID -3290878)