22

Supply and Installation of READING AREA TABLE :- ( WITH 25MM MODULAR TOP ) (MAKE - Geeken/ Godrej/ featherlite/Radhe Industries) BASE FRAME WILL BE ON MS PIPE 2

Supply and Installation of STEEL OPEN BOOK SHELF :- WITHOUT DOOR (MAKE - Geeken/ Godrej/ featherlite/Radhe Industries) THICKNESS :- 0.8 GUAGE CRCA SHEET BOOK SHELF (DOUBLE SIDE OPEN / LIBRARY TYPE) Primary Structural Material (Steel) Shelves: CRCA steel sheet IS:513 Grade D, Thickness: 0.8 mm (±0.05 mm) Shelf edge folding: Front & rear edge 25 mm double fold, Side fold 12 mm Vertical uprights: CRCA steel 1.0 mm, Box-folded section for rigidity Wooden Side Panels (If applicable as per image) Material: 18 mm HDHMR board, Density ≥ 850 kg/m³, Moisture content ≤ 10% Laminate: 1.0 mm exterior, 0.8 mm interior Edge banding: 2 mm ABS PUR adhesive Shelf Load Design Designed load: 70 kg UDL per shelf, Deflection: ≤ L/300 Permanent deformation: Not allowed Fabrication Process Steel cutting: CNC laser / turret punch Bending: CNC press brake Welding: MIG welding only (spot welding prohibited) Weld penetration: ≥ 90% Assembly System Knock-down construction Nut bolts: M 8 grade 8.8 zinc plated, Shelf adjustment pitch: 25 mm Surface Treatment Pretreatment: 9 tank chemical process Powder coating: Epoxy polyester, DFT 70–90 microns, Corrosion resistance: Salt spray ≥ 500 hrs Dimensional Accuracy Squareness: ≤ 1 mm deviation, Level variation: ≤ 2 mm overall

Supply and Installation of STEEL BOOK SHELF :- WITH GLASS DOOR (MAKE - Geeken/ Godrej/ featherlite/Radhe Industries) THICKNESS :- 0.8MM GUAGE CRCA SHEET. GLASS DOOR CUPBOARD (FULL HEIGHT) Cabinet Body Material: CRCA steel IS:513 Grade D Thickness: Outer body: 0.8 mm, Internal stiffeners: 1.0 mm Vertical stiffeners: At 300 mm c/c Door Assembly Door frame: CRCA steel 1.0 mm Box-folded construction, Glass: 5 mm toughened clear glass, BIS marked, Edge polished Glass fixing: EPDM rubber gasket (no direct metal contact) Hinges & Hardware Hinges: Heavy duty concealed hinges, Opening angle ≥ 110°, Cycle tested 50,000 cycles Locking: Central locking system, Zinc alloy cam lock, Master key provision Shelves (Internal) Steel shelves: CRCA 0.8 mm, Load ≥ 50 kg UDL, Shelf support: Steel shelf clips Fabrication & Finish Weld type: Continuous MIG weld Surface: 9 tank pretreatment, Powder coating DFT 70–90 microns Dimensional Control Size: 900 W × 450 D × 1980 H mm Door gap: Uniform 2–3 mm

Supply and Installation of STEEL LOCKERS :- BAGGAUGE COUNTER ROOM (MAKE - Geeken/ Godrej/ featherlite/Radhe Industries) THICKNESS - 0.8MM GLASS DOOR CUPBOARD (FULL HEIGHT) Cabinet Body Material: CRCA steel IS:513 Grade D Thickness: Outer body: 0.8 mm, Internal stiffeners: 1.0 mm Vertical stiffeners: At 300 mm c/c Door Assembly Door frame: CRCA steel 1.0 mm Box-folded construction, Glass: 5 mm toughened clear glass, BIS marked, Edge polished Glass fixing: EPDM rubber gasket (no direct metal contact) Hinges & Hardware Hinges: Heavy duty concealed hinges, Opening angle ≥ 110°, Cycle tested 50,000 cycles Locking: Central locking system, Zinc alloy cam lock, Master key provision Shelves (Internal) Steel shelves: CRCA 0.8 mm, Load ≥ 50 kg UDL, Shelf support: Steel shelf clips Fabrication & Finish Weld type: Continuous MIG weld Surface: 9 tank pretreatment, Powder coating DFT 70–90 microns Dimensional Control Size: 900 W × 450 D × 1980 H mm Door gap: Unif orm 2–3 mm

-

Supply and Installation of LIBRARY OFFICE ( L-SHAPE TABLE ) :- 36MM TOP & SIDES (MAKE - Geeken/ Godrej/ featherlite/Radhe Industries) WITH SIDE TABLE & PEDESTAL LIBRARY / OFFICE DESK Raw Material – Wooden Panels Table top & side panels: 25 mm thick Pre-Laminated Particle Board, Conforming to IS:12823 (Grade P2), Density: 650–700 kg/m³, Moisture content: 8–10% Modesty panel: 18 mm thick PLB / HDHMR, Density ≥ 850 kg/m³ Steel Sub-Structure Internal support frame: CRCA steel IS:513 Grade D, Thickness: 1.2 mm Legs / Pedestal frame: MS rectangular tube 50×25×1.2 mm Fabrication Process CNC laser cutting for steel parts CNC press brake bending (no hammer bending allowed) MIG welding at load joints Weld strength ≥ 90% of parent metal Surface Finish Steel parts: 9 tank pretreatment Epoxy polyester powder coating DFT 70–90 microns Wooden edges: 2 mm ABS edge band PUR adhesive (hot melt) Hardware Insert nuts: M6 zinc plated Screws: Confirmat screws Levelers: ±10 mm adjustable nylon base Dimensional Control Size: 2400 W × 1950 D × 750 H mm Flatness: ≤ 1.5 mm per meter, Load capacity: 150 kg static

Supply and Installation of INVIGILATOR TABLE :- 36MM TOP & SIDES (MAKE - Geeken/ Godrej/ featherlite/Radhe Industries) Raw Material – Wooden Panels Table top & side panels: 25 mm thick Pre-Laminated Particle Board, Conforming to IS:12823 (Grade P2), Density: 650–700 kg/m³, Moisture content: 8–10% Modesty panel: 18 mm thick PLB / HDHMR, Density ≥ 850 kg/m³ Steel Sub-Structure Internal support frame: CRCA steel IS:513 Grade D, Thickness: 1.2 mm Legs / Pedestal frame: MS rectangular tube 50×25×1.2 mm Fabrication Process CNC laser cutting for steel parts CNC press brake bending (no hammer bending allowed) MIG welding at load joints Weld strength ≥ 90% of parent metal Surface Finish Steel parts: 9 tank pretreatment Epoxy polyester powder coating DFT 70–90 microns Wooden edges: 2 mm ABS edge band PUR adhesive (hot melt) Hardware Insert nuts: M6 zinc plated Screws: Confirmat screws Levelers: ±10 mm adjustable nylon base Dime nsional Control Size: 2400 W × 1950 D × 750 H mm Flatness: ≤ 1.5 mm per meter, Load capacity: 150 kg static

Supply and Installation of RECEPTION 1 TABLE :- 36MM TOP & SIDES (MAKE - Geeken/ Godrej/ featherlite/Radhe Industries) Raw Material – Wooden Panels Table top & side panels: 25 mm thick Pre-Laminated Particle Board, Conforming to IS:12823 (Grade P2), Density: 650–700 kg/m³, Moisture content: 8–10% Modesty panel: 18 mm thick PLB / HDHMR, Density ≥ 850 kg/m³ Steel Sub-Structure Internal support frame: CRCA steel IS:513 Grade D, Thickness: 1.2 mm Legs / Pedestal frame: MS rectangular tube 50×25×1.2 mm Fabrication Process CNC laser cutting for steel parts CNC press brake bending (no hammer bending allowed) MIG welding at load joints Weld strength ≥ 90% of parent metal Surface Finish Steel parts: 9 tank pretreatment Epoxy polyester powder coating DFT 70–90 microns Wooden edges: 2 mm ABS edge band PUR adhesive (hot melt) Hardware Insert nuts: M6 zinc plated Screws: Confirmat screws Levelers: ±10 mm adjustable nylon base Dimen sional Control Size: 2400mmW x 1650 mmD x 750mmHT Flatness: ≤ 1.5 mm per meter, Load capacity: 150 kg static

Supply and Installation of NEWSPAPER STAND : (MAKE - Geeken/ Godrej/ featherlite/Radhe Industries) MS POWER COATED FRAME READING / NOTICE BOARD (FLOOR MOUNTED TYPE) Board Core Material Core panel: 18 mm thick PLB (Pre-Laminated Board) conforming to IS:12823 Density: 650–700 kg/m³ Moisture content: 8–10% Surface: Pin-able soft board fabric / laminate Fabric GSM ≥ 320 Anti-fungal treated Frame Structure Main frame: MS square tube 25 × 25 × 1.2 mm Material grade: IS:2062 E250 Inner backing frame: CRCA steel 0.8 mm Spot welded at 100 mm c/c Fabrication & Jointing Tube cutting by cold saw Joints: MIG welded Full penetration weld at corner joints Grinding: Weld flush, Ra ≤ 3.2 Surface Treatment Steel parts: 9 tank chemical pretreatment Epoxy polyester powder coating DFT 70–90 microns Wooden edges: PVC edge band 1 mm sealed Mounting & Stability Floor stand legs: MS pipe 40 × 20 × 1.6 mm Base shoes: Anti-skid rubber pads Stability f actor: No toppling at 10° push angle Dimensions & Tolerance - Board size: 900 W × 600 H mm Overall height: 1650 ± 5 mm

Supply and Installation of SOFA SET :- (MAKE - Geeken/ Godrej/ featherlite/Radhe Industries) Two Seater Sofa (VEGAS 2) Primary Frame Wood: Seasoned hardwood (Neem / Beech equivalent) Moisture content ≤ 10% Section size: Minimum 60 × 40 mm at load points MS reinforcement: 25 × 25 × 1.6 mm square tube, Welded internally Jointing System - Wood-to-wood joints: Mortise & tenon, PVA + resin adhesive Wood-to-steel: M8 bolts with insert plates Cushion System Seat cushion: Molded PU foam, Density 40 ± 2 kg/m³, Thickness 100 mm Back cushion: Density 32 ± 2 kg/m³, Thickness 80 mm Upholstery Material Leatherette: Thickness ≥1.0 mm, Tear strength ≥ 25 N/mm, Fire retardant as per BS 5852 Stitching: Double seam, nylon thread Support & Legs Legs: MS powder coated / SS Floor contact: Anti-scratch nylon bush Load & Performance Static load: 300 kg distributed Cycle test: 40,000 sitting cycles Dimensions - 1300mm(L) X 740mm(D) X 770mm(H)