Ladakh

Technical Eval

Works

Civil Works - Others

Construction of Community hall at Maneytselding Leh (by way of Steel Truss )

Public Works Department

Leh Ladakh, Ladakh

Amount: ₹13.6 LCloses: 17 Jun 2026Closed

Timeline

Published11 Jun 2026
Closed17 Jun 2026
Technical Evaluation20 Jun 2026
Award—

Bids

6 Bids20 Jun 2026

#	Company	Status
1	M/S ALI MOHD GOVT. CONTRACTOR Accepted-Technical	Accepted-Technical ADMITEED
2	M/S CHINBA GYALSON Accepted-Technical	Accepted-Technical ADMITEED
3	M/S RINCHEN DORJE Accepted-Technical	Accepted-Technical ADMITEED
4	M/S SONAM TASHI Accepted-Technical	Accepted-Technical ADMITEED
5	M/S THINLES STANZIN GOVT CONTRACTOR Accepted-Technical R O MATHO \| LEH LADAKH \| LADAKH \| 194101	Accepted-Technical ADMITEED

Tender Value

₹13.6 L

EMD Value

₹27,260

Closing Date

17 Jun 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer PWD Rnb division Leh

Address

Office of the Executive Engineer Rnb division Leh

Work Description

Construction of Community hall at Maneytselding Leh (by way of Steel Truss )

Tender Information

Tender ID

2026_PWD_19052_1

Reference Number

E Tender 31 of R and B Division Leh

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Percentage

Period of Work

45 days

Location

LEH

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical

RequiredScan copy of registration certificate renewed up to date (.pdf)

RequiredScan copy of EMD (No bid security declaration /MSME shall not be entertained ) (.pdf)

RequiredScan copy of cost of tender document inform of DD/GR/online payment (.pdf)

RequiredScan copy of GST clearance certificate up to last six month (.pdf)

RequiredScan copy of PAN card along with contact numbers (.pdf)

RequiredScan copy of EPFO code (.pdf)

RequiredScan copy of affidavit of correct information with name of work n tender id (.pdf)

RequiredScan copy of registration certificate of CBuD app portal (.pdf)

RequiredScan copy of all other document required as per NIT (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,000

Tender Fee Payable To

Office of the Executive Engineer Rnb division Leh

EMD Fee Amount

₹27,260

Important Dates

Last Activity

20 Jun 2026

Published

11 Jun 2026

Bid Opening

19 Jun 2026

Download Starts

11 Jun 2026

Download Ends

17 Jun 2026

Submission Starts

11 Jun 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (3 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including Hot finished welded type tubes	4,500	kg	172.12	₹7,74,540
-	Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m2	136	Mtrs	869.33	₹1,18,228.88
-	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	669.26	sqm	703.86	₹4,71,065.34

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.79 MB

Work Item Documents

BOQ_45451.xls

BOQ • 0.25 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

M/S ALI MOHD GOVT. CONTRACTOR

Accepted-Technical

M/S CHINBA GYALSON

Accepted-Technical

M/S RINCHEN DORJE

Accepted-Technical

M/S SONAM TASHI

Accepted-Technical

M/S THINLES STANZIN GOVT CONTRACTOR

Accepted-Technical

R O MATHO | LEH LADAKH | LADAKH | 194101

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including Hot finished welded type tubes

4,500

172.12

₹7,74,540

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m2

136

Mtrs

869.33

₹1,18,228.88

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

669.26

sqm

703.86

₹4,71,065.34