WELCOME MAINTENANCE IN OFFCRS/JCOS/OR MD ACCN IN AGE BR-II UNDER GE BABINA

Amount

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for applying Two coats of Plastic emulssion paint including primer on surfaces of wall of any description over 10cm width or girth, not otherwise described complete all as specified and directed. Note :- Plastic Emulsion Paint and primer of same manufacturer to be applied through mechanical means only.

M&L for a coat of JK/Birla wall care putty 1mm thick including prepration of surface complete all as specified and as directed.

M&L for preparation of surfaces and applying two coat of oil bound distemper with roller on old treated surface of wall etc complete all as specified and directed.

M & L for preparation of surfaces and applying one coat of oil bound distemper with roller on old treated surface of wall etc complete all as specified and directed.

M&L for preparation of surfaces and applying two coat of oil bound distemper with roller on new surface of wall with Primer etc. complete all as specified and directed.

M&L preparing old decorated plastered or unplastered surfaces of wall, pilasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed. Note: All grass, trees should be removed from the chajjas, and wall during the time of white wash, No extra payment shall be paid to the contracotrs.

Description same as per item 7 above but on ceiling in lieu of walls complete all as spedified and as directed.

M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames of any description exc 1.5 Sqm but n exc 4 sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down wooden shutters of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed.

Taking down wooden shutters of any description n. exc 1 sqm each complete all as specified and directed.

S&F pressed steel door frame of size 125x60 mm with one or more rebates including necessary lugs, hinges, lock strike plates etc complete all as specified and directed.

S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters (factory made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.

S&F for 30mm thick locally made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and directed.

S&F 30mm thick locally fabricated plain framed, panelled Shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 12mm BWP grade BWR Plywood. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F solid PVC door frames of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a VC sheet strip of 20mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rails & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame weled/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing.

S&F powder coated aluminium sliding windows (three track frame of weight not less than 1.17Kg/Rm) with one fly proof shutters and two glazed shutter having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick, vertical style of section 38x20x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including usingg standard aluminium section including necessery fittings and fixtures complete all as specified and directed. Note : (i) All rate i.e track frme, shutter, glazing cleat, rubber gasket etc is deemed included in quoted rates. (ii) Wiremes & glass pane will be measured & paid separately with respective items.

S&F Powder coating aluminium window and ventilator shutters with frame of weight not less than 1.17Kg/Rm with sash bar half portion openable for ventilator purpose including fixing of wiremesh outside with festening arrangement, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

S&F mild steel framed work as in grill with ends of bars shouldered and or riveted or fixed in spike, framed guard bars confirming to Fe- 410-W or Fe-290 complete all as specified and as directed.

Hacking out old broken glass in any thickness size quality or description from wooden/metal frames complete all as specified and directed.

S&F sheet glass 4mm thick ordinary quality and glazing with wooden beads or oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected

S&F in repair 3mm thick firured glass, pin headed type and glazing with oil putty in squares n. exc 0.5 sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.

S&F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture 1.00mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.00mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge.

Demolition of brick work or stone/ boulder masonry, build in cement mortar or lime mortar including all quoins, arches, pillars etc but excluding ashlars complete all as specified and as directed.

M&L brick work with fly ash ‘brick’ (FASB) confirming to IS 12894 of strength M-10 straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed.

S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

S/F 125 mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked complete all as specified and directed.

S&F 250 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

S&F 150 mm Floor door stopper of aiuminium alloy body and tongue, anodised, with hard drawn steel spring , fixed in floor complete all as specified and directed.

M&L for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 18/19mm thick prelaminated particle board interior grade, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including 2nd class hard wood beading on cutting exposed edges, polishing complete as in palmate boxes and kitchen cabinet and bed room shutters or in any type complete all as directed.

S&F auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed.

S&F stainless steel handles 100mm size for kitchen cabinet shutters complete all as specified and directed.

S&F in repair continuous piano hinge mild steel 30 mm width flap when open , bright finish or electrogalvanised complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of stone slab or tiles of any description or thickness in floors or aprons etc(laid bedded and pointed in any mortar) complete all as specified and directed.

M&L for colour printed glazed ceramic tiles (300x600mm) X 6-7mm thick as in dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.

M&L for Vitrified ceramic tiles 600x600x9-10mm thick, light coloured as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed layer in CM 1:6 laid over complete all as specified and directed.

M&L for Vitrified ceramic tiles size 600x600x9-10mm thick, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 10 mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 Sqm each removal to store and Refixing in same opening including cutting to size and fittings with making good surfaces conditions and etc complete all as specified and as directed.

M&L for 20mm thick granite slab, machine cut, well polished, bedded in 15mm thick in CM 1:4 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc. complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type BO using 12.5 mm graded stone aggregates for levelling course etc complete all as specified and directed.

S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.

S& F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.

Taking up or down existing 15mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted.

Taking up or down existing 20mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted.

S&F in jointing and testing 15mm dia bore galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings complete all as pecified and as directed.

S&F in jointing and testing 20mm dia bore galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings complete all as pecified and as directed.

S&F in repair 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 gm) complete all as specified

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15mm dia bore complete all as specified and as directed

S&F in repairs15mm bore cast copper alloy chromium plated fancy type CP wall mixer tap with telephonic shower for cold & hot complete all as specified and directed

S&F in repairs 15mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed.

S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (Pedastal pattern) 'white (excluding flushing cistern and flush pipe ) including connection todrain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated jet spray for EWC complete all as specified and as directed.

S&F in repairs hand shower (health faucet) (ABS chromium plated) with 8mm dia, 1m long flexible tube with wall hook complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.

Supply only 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type mixer pillar tap for cold & hot water complete all specified and as directed

S&F in repair 32 mm dia PVC waste pipe complete all as specified and directed.

S&F in repair stainless steel kitchen rack plate rack over all size 900mmx900mm make out 0.63mm thick stainless steel sheet complete all as specified and as directed

S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, coupling, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915mmx460mm & bowl size 410mm x330mmx160mm complete all as directed by the Engineer-in-Charge

S&F in repair brass chromium plated tubler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as dirceted

S&F stainless steel curtain rod 25mm dia grading H-304, with fancy round knob both ends and brackets complete all as specified and directed

S&F in repair CP corner glass shelf consisting of 5.5 mm thick sheet glass with bracket fixed with screws complete all as directed by the Engr-in-Charge.

S&F for Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repairs complete all as specified and directed.

S&F in repair brass chromium plated shower rose 75mm size with long body fancy type including fixing to steel pipe or union complete all as specified and as directed

Demolition of cement concrete (unreinfored )in ground floor and paving n,exc 15cm thickness below or above ground level complete all as specified and as directed.

S&F in repair floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed.

S & F in repair EWC Seat cover of existing colour, any size including fixing arrangements and taking of existing seat cover etc complete all as specified and directed.

Ms Vinay constructions

M/S DEVANSH ENTERPRISES

M/S Chadha Brothers

M/s Ravi Traders