Constructing pipeline drain for dewatering of flood water of village Hindalwala (Dhani Tailan) from RD 12900 to 0 outfalling into Rangoi Nallah at RD 6.35 KM left side

Amount

Excavation for pipeline running under pressure in trenches and pit, in open areas, where disposal of surplus earth is done alongwith the alignment including trimming & dressing sides, levelling of beds of trenches to correct grade, cutting joints holes, cutting trees and bushes etc., fefilling consolidation and watering of refil, in 15 cm layer and restoration of unmettalled or unpaved surface to its original condition, including the cost of dewatering of rain water, diversion of traffic, night signals, fixing caution board, watching, fencing etc, and outside the town in ordinary soil without timbering and shoring upto 1.5 meter depth. HSR item No.6.8(a)

Earth work excavation in ordinary soil exclusive of compensation of earth dressed with cobined lead 30 meters including breaking of clods. HSR item No. 6.2(b)(c)(i) and 6.3(i)

Laying cement Concrete 1:3:6 with stone aggregate HSR item No.10.40

First class brick work laid in cement sand mortar 1:3 in foundation & Plinth level HSR item No. 11.5

First class brick work laid in cement sand mortar 1:3 in first storey upto 4 meter above plinth level. HSR item No. 11.10

Laying cement plaster 12mm thick laid in CM 1:3 HSR Item No.15.4

Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position, completein all respect. HSR item No.10.82

Mild steel reinforcement for RCC work where not including in the complete rate of RCC, including bending binding and placing in position complete. HSR item No.18.21

Providing & fixing wrought iron and mild steel (Grill/Gate of inlet) HSR item No.18.12

Providing, lowering , laying, cutting, jointing with rubber rings marked with IS:5382 and testing of Spigot and socketted RCC 1200 mm dia NP2 marded with IS:458-1988 and specials into trenches for all depths complete in all respect. HSR item No. 28.60

Providing , lowering, laying, cutting, jointing with rubber rings marked with IS:458-2003 and testing of Spigot and socketted RCC 800 mm dia NP3 marked with IS:458-1988 and special into trenches for all depths complete in all respect. HSR item No.29.96

Providing, lowering,jointing with rubber ring marked IS-458-2003 RCC 1200mm dia NP4 & special into trench for all depth (NS)

BALIRAM SINGH