WBPWD/SSE/SWEC/NIQ87/2025-26

Amount

Part-A EI Works

Distn. wiring in 3 X 22/0.3 (1.5 sqmm) single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire [Make:- Finolex/Havells/RR/ Polycab] in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) as per GS.

Distn. wiring in 3 X 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point with Modular type plug socket & switch (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) as per GS.

On Board

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire [Make:- Finolex/Havells/RR Kable / Polycab] in 20mm size PVC rigid conduit FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.

Average run 6 mtr

Average run 8 mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire [Make:- Finolex/Havells/RR/ Polycab] in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish. On Board

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe as per GS. [Make:- Finolex/Havells/RR Kable / Polycab]

3 x (1.5 sqmm)

2x(2.5 sqmm)+1x(1.5 sqmm)

2x(4 sqmm)+1x (2.5 sqmm)

2x (6 sqmm) + 1x (4 sqmm)

4x (16 sqmm) + 2x (10 sqmm)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

a. 2.5sqmm[F-5, 9(i)]

b. 4sqmm[F-5, 9(ii)]

c. 6sqmm[F-5, 9(iii)]

d. 10sqmm[F-5, 9(iv)]

e. 16sqmm[F-5, 9(v)]

Cutting channel of 31 mm x 31 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works

13 mm dia 3 mm thick polythene pipe without earth continuity wire.

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works

19 mm dia 3 mm thick polythene pipe without earth continuity wire.

Supplying and fixing polythene pipe (3mm thick) complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire as per GS.

13mm dia

19mm dia

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. (Make: Legrand/Siemens/Schneider)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.

8Way (Make: Legrand/Siemens/Schneider)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS (Make: Legrand/Siemens/Schneider)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS (Make: Legrand/Siemens/Schneider)

Supplying and fixing 415V, 63A TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. [Make: Siemens/Schneider/LK(L&T)]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply and Delivery Tube Light fittings.

Supply and Delivery of LED Tube Light. (Make: Mas LED Tube 1200mm 18W 865 T8 I – 2100lm [Make Philips, Model No. TMC 502 1xT-LED 22W or equivalent model of Crompton/Wipro]

Supply and Delivery of Single LED Tube Light. Single LED tube light fittings [ Make Philips, Model No. TMC 502 1xT-LED 22W or equivalent model of Crompton/Wipro]

Supply and Delivery of Doble LED tube light fittings [Make Philips, Model No. TMC 502 2xT-LED 22W or equivalent model of Crompton/Wipro ]

Supply & delivery of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod, Canopy, fork incl S & F of P - 2 type capacitor as per IS specification & proper Manufacturer certificate of the capacitor and Safety Wire (supplied at the time of delivered the fans ) etc. without regulator, (Make- Usha 1200MM STRIKER PWD ISI 1 STAR (Safety Wire & S3 Capacitor) Br /Orient Electric- Summer Breeze Pro (5yrs warranty), 1200 mm sweep; 44W; 320 rpm; 225 cmm; 3 star ac ceiling fan / Crompton Greaves Cat No. HIGH SPEED (HS) 1200mm -1 STAR & ISI MARK ) and as per direction of EIC as per direction of EIC.

Supply and Delivery of 230 V, 50 HZ, 450 mm, 90W, 1325 RPM,110 CMM, high flo oscillating type, metal blades Wall Bracket fan operated by pull cord switch with inbuilt regulator. ( Make:- Crompton Cat No- 450mm SSTORM 2 ( METAL BLADE) /Orient Electric - Tornado Wall II/USHA Cat No. 450MM DOMINAIRE WALL FAN

Supply & Delivery 9"(230mm), 1370 RPM, 40 Watt Heavy duty AC Exhaust fan incl. necy., all connections. [Make- EPC]

Supplying LED bulk head light fitting (Make:- Philips cat no.-WT202W LED6S NW PSU S3 PC/ CG cat no.- LBHE-10-CDL) or equivalent model of Wipro/Crompton)

Supply and fixing of 9 Watt LED Bulb (Make:- Philips/Bajaj/Crompton)

Supplying mirror light fitting (Make Philips, cat - BN 021 LED12S- 6500 PSU GR or equivalent make of Crompton/Wipro)

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)[D-14, 29]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire[C-3/21A]

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length [C-4,29]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) on existing Modular GI switch board with top cover plate incl. Making necy. connections etc.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) Al

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Fixing of mirror light fittings.

Supply & Fixing 240 V, 2x 6 A, 3 pin Modular type plug socket (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) with 2x 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A/27A, Modular type starter (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19, 17)]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) & necy.Connections.

Supplying and fixing 415V, 100A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [Make: Siemens/Schneider/LK(L&T)]

Supplying and fixing 415V, 125/200A Kitkat fuse unit ( 03 Nos) fixed on hylum sheet on wall with necessary nuts bolts washers etc incl. S & F 1 no. neutral link set. (Make-L&T/Havells/Standard)

Supply and delivary of 4 core 35 Sq.mm Al/Ar. XLPE cable (Make- Gloster/Meshcab/Havells/RR Kable/Finlolex)

Laying of cable above 3½ core 35 sqmm and upto 3½ core 50 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting[F-1, 2(c)]

4 core 35 sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below

4 core 35 sqmm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 core 35 sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level.(make: ISI- medium)

Excavation of soil for installation of Earth Electrode and filling & ramming.(for morrum)[G1,1b]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required[G2,4a]

Connecting the equipment to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages[G2 , 5 i]

No. 4 SWG

Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Supply and Fixing of Timer DB (concealed in wall or Surfaced as per the site condition) 1) 230V, Upto 16 A capacity 24 Hrs Digital Time Switch (Make-Lauritz Knudsen (L&T) Cat No:- AUTS02DIG00/Siemens/Schneider/Legrand) 2) 2 Pole Power Contrcator (L&T-MNX 32-2P Cat No-CS90240/Siemens/Schneider ) 3) 32A SP MCB. [Make-Siemens/Schneider/Lauritz Knudsen (L&T)] 4) 32A DP Isolator. (Make-Siemens/Schneider/Lauritz Knudsen (L&T) ) 5) Toggle Switch. (Make-Siemens/Schneider/Lauritz Knudsen (L&T) or equivalent make) 5) (2+16 Way) SPNDB (Make-Siemens/Schneider/Lauritz Knudsen (L&T) 6) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar etc with this box for termination of power. 7) The complete arrangement must be wiring by 1/2.5/4/6 Sq mm PVC insulated Cu wire(Make:- Gloster/Polycab/Havells) with suitable length incl socketing /lugs etc as per requirement & direction of EIC (Make-Siemens/Schneider/Lauritz Knudsen (L&T)/Legrand)

Supplying & Delivery of 2 core 10 Sq.mm Al/Ar XLPE (Make- Gloster/Meshcab/Havells/RR Kable/Finlolex)

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting[F-1, 2 (a)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: 2 core 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 core 10 sqmm

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.[C-3,18]

Supply & Delivery 3" dia. 2 Mtr. Long heavy gauge G.I. Pipe (Minipole- ISI Marked) having M.S. sole plate welded with drilled hole at bottom of the pole to be installed on roof of building incl. providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. Supply & fixing 50mm Dia 2mtr long detachable type GI Single arm bracket suitable for the pole head.The arm brfacket shall be properly welded with 15mm thick stifner plate of pole sleeve for strengthening including properly fixing arfangement with the pole by bolt , nut, wahser as per direction of EIC ( ROOF TOP LIGHT)

Supply & Fixing of aerodynamically designed 250 V 90 Watt LED street light luminaire on the top of the pole. complete with all accessories with single piece die cast alluminium housing and heat resistant toughened glass with IP 66 protection, minimum Efficacy > 110/120 LPW and with in-built SPD protected out door luminaires embossed with manufacturer's logo and must have 5 year warranty from OEM. [Make:- Jaquar - Cat No. OSL GRY LSRTTOS090XC/ Wipro Cat No.LR02-102-XXX-57-G2 or equivalent of Benlo ] i) A minimum 5-year on-site warranty shall be provided by the Original Equipment Manufacturer (OEM). Warranty documents must be submitted to the Engineer-in-Charge (EIC) prior to the installation.

Supplying & Fixing PVC waterproof type looping cable box(Make: SINTEX or As per the chpice of EIC) size minimum 200x150x100 mm deep comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, two provision of compression type brass cable gland for upto 4- core 16 sqmm PVC/A cable and having lined with rubber gasketted top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole, including S&F 40x6 mm thick, suitable "C" type 4mm thick MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Supply and drawing 3x1.5 sq. mm PVC insulated copper wire through 13/19 mm Polythene Pipe from loop box to fitting.

Connecting the equipment to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages. No. 4 SWG

APU ELECTRIC (BID ID -7517027)

BAPPA CONSTRUCTION (BID ID -7608700)