Hospital Supply Tender

Hemodialysis Machine With RO Plant Technical Specification Equipment Specifications 1. Dimensions  Height: 122 cm  Width: 30 cm  Depth: 37 cm 2. Weight Standard system  Approximately 60 kg  System with all options: Approximately 80 kg 3. Power supply  AC (single-phase) 100 to 120V, or 200 to 240V  50/60Hz± 1 Hz  Back-up battery: Ni-MH. battery, . 24V/500mAh 4. Water supply  Pressure range of water supply  70 to 300 kPa (11 to 101 PSI)  Temperature: 5 to 30°C 5. Dialysate flow. rate. (Qd) Setting.  range: 300 to 700ml/min 6. Dialysate temperature  Setting. range: . 30 to 40°C 7. Dialysate conductivity Bicarbonate conductivity  Setting range: 1.5 to 7.0mS/cm Total conductivity  Setting. range: . 12.5. to. 15.5mS/cm 8. Disinfection method  Chemical, heat, or citric acid/heat 9. UF control system  UF rate setting range: O or 0.1 to 4.0L/h  Accuracy: ±30ml/h (Qd 300 to 500ml/min)  ±0.1%. of .O d . (O d . 501 _ to 700ml/min) 10. Blood pump  Flow rate setting range 40 to 600ml/min(blood tube's outer diameter 12mm, inner diameter 8mm); 40 to 350ml/min(blood tube's outer diameter 9.6mm, inner diameter 6.6mm 11. Air detector  Ultrasonic, Sensitivity (blood flow rate 250ml/min) normal bubbles: 0.02ml micro .bubbles . (blood/air . mixture): 0.0003m. 12. Blood leak detector  Optical, Sensitivity: 0.5ml blood/1 L dialysate (Blood: Hematocrit 20%, Dialysate temperature: 37 °C) 13. Monitoring Display Specifications (Measurement Range)  Venous pressure -200 to +500mmHg  TMP -100 to +500mmHg  Dialysate pressure -600 to +600mmHg  1.Machine should have touch screen facility with customization of screen.  2.Machine should have sodium/UF/Bicarbonate profiling with 9 different modules .  Machine should have 16 patients data storage facility.  Machine should have facility to show complete flow diagram during disinfection and Test.  Machine should have dialysate flow rate -300 to 700 mL/minute with incremental of 1 ml/minute.  Machine should have heater capacity of 1500VA or less to save electricity. Performance (*Optional) • Single pump single needle (Click-clack) • UF/Conductivity profile • Concentrate nozzle rinse • Dialysate filter • Blood pressure monitor* • Network connection* • Blood volume monitor User Friendly Interface • Treatment settings data can be stored for up to 16 patients, eliminating the need to input data every time • Large graphic display for easy operation Safety • Continuous monitoring of pumps and valves during treatment  Self test of extracorporeal blood circuit, hydraulic circuit, and CPU system before starting treatmen  Detectors for blood, air bubble, and blood tubing lines Easy • Maintenance Flow diagram for checking the function of each part of the hydraulic circuit • Machine and treatment history data RO Plant – 250LPH