Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.9 LAccepted-AOC GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L1 | Accepted-AOC Lowest one | |
| 2 | L2₹22.5 L+₹1.6 L (7.61%)Rejected-Finance ROOM NO 997 GALI NO 3 PART NO 3 GANESH MURTHY NAGAR CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹22.5 L+₹1.6 L (7.64%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹26.1 L+₹5.2 L (24.9%)Rejected-Finance B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹27.3 L+₹6.4 L (30.5%)Rejected-Finance B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹99,000
Closing Date
30 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NOFRA
Dr Homi Bhabha Road New Navy Nagar Colaba Mumbai
REPAIR OF FACIA PLASTER CHAJJA WINDOW DOOR AND OTHER MISC WORK AT HIGH RISE BLDGS UNDER CELL NO 1 UNDER GE (NW) NOFRA
2024_MES_636820_1
8228
Open Tender
Civil Works
Item Rate
180 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE NW NOFRA
₹99,000
Yes
1 Mar 2024
10 Jan 2024
1 Feb 2024
10 Jan 2024
30 Jan 2024
23 Jan 2024
10 Jan 2024 - 17 Jan 2024
Amount
Taking down existing cement or cement lime plaster and preparation of surfaces of walls of any description incl racking out joints backing for scrubbing down with water and any height including necessary scaffolding and removing debris out side MOD land complete all as specified and directed.
Material and Labour Plastering in cement & sand mortar 1:4, 15mm thick on fair faces of brick work or concrete surfaces of walls finished fair and even any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for rendering 5 mm thick cement plaster on concrete surfaces in CM 1:3 as on ceiling finished even and smooth any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Replacement of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond - 5 cement- 15 sand) -in damaged areas in 30mm thickness including leveling profliling etc complete all as specified and directed.
Material and Labour Rendering 20mm thick on other than fair face of brick work or concrete in two layer first is 15mm thick CM 1:4 and second 5mm thick cement mortar 1:4 mixed with water proofing powder at the rate of 3% of cement shall be used in second coat of plaster or as per manufacturers instructions and any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. [Note :- The cost of water proofing compound is deemed to be inclussive in plaster work only]
Material and Labour preparation of old plastered surfaces by complete removal of existing treatmentand applying two coat oil bound distemper on ceiling over a coat of alkaline resistent primer after applying a coat of wall care putty to plumb the existing surface,any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
Material and Labour preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkaline resistent primer on ceiling any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
Material and Labour preparation of old plastered surfaces by complete removal of existing treatment and applying two coats Plastic emulsion paint on wall over a coat of alkaline resistent primer after applying a coat of wall care putty to plumb the existing surface, complete all as specified and as directed.
Material and Labour preparation of new plastered surfaces and applying two coats Plastic emulsion paint on wall over a coat of alkaline resistent primer after applying a coat of wall care putty to plumb the existing surface, complete all as specified and as directed.
Material and Labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof including necessary scaffoling complete all as specified and directed.
Preparing of old decorated surfaces of walls/ceiling washing the surface thoroughly, filling the cracks, creaves with crack filling compound as suggested by the manufacturers, applying two coats of acrylic latex base exterior grade (100%Acrylic)cutting, chasing the cracks at least 20 mm deep by means of grinder/machine etc.including necessary scaffoling complete all as specified and directed.
Preparing of old/new surfaces of walls/ceiling (of projected Cup boards) washing the surface thoroughly, filling the cracks, creaves with crack filling compound as suggested by the manufacturers and applying two coats of Rain coat manufactured by Dr Fixit of Piddilte Industries Ltd or eqivalent approved make available from list of manufacturers. (shade to match the existing paint) complete all as specified and as directed by Engineer in Charge.
Chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure & cleaning and disposal of debris out side the premises etc complete as directed by Engr-in-Charge. [Note :-Hard concrete shall not be removed by force].
Clean existing reinforement with/ rotary wire bruch, making the surfaces free from loose material dirt etc, complete, applyin g two coats of alkaline rust converting primer FEOVERT confirming to ASTM-B-117, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hour between the coats and applying protective coating IPNET-RB complete all as specified and directed.
Providing and applying jacketing around columns with micro concrete (Molith MC) M40 including all lifts, shuttering, drilling, holes and fixing shear anchor as per specification complete all as specified and directed. (Rates including jacketing, formwork and micro concrete) [Note :- Reinforcement shall be measured and paid saperately]
Replacement of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET_RB complete all as specified and directed.
Carryout application of bi-polar migratory corrosion inhibitor EPCO-KP-100/Protectsil/ CIT/Ferogard 903 on concrete surface (This inhibitor shall have migratory kind of properly which permits the material to a vertual extent of 100mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It should have properly to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete complete all as specified and directed.
Material and Labour for drilling and fixing Rohibb Teflon nozzoles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes in structural members at the intervals of 500 center to center in staggered manner or as directed by Engr-in-Charge in RCC structural element work shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia, Rohibb Teflon nozzles in cleared holes. External end of nozzles to be machine to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for minimum 12 hours. (iii) Cutting the nozzles. Cut the nozzles by chiselling after completion of grouting without damaging structural elements.
Material and Labour for injecting of site cement slurry grout, in ratio 1:2 (1 Cement, 2 water) including super plasticizer (Supercom-100) 250 ml/50 Kgs. Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/ specified grout by means of pump at a pressure of 0.5 Kg/CM2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. (For repair to slab).
Material and Labour for injecting low viscosity MONOPOL (3-5cps) high molecular weight monometer by pressure and using mechanized injector gun with accessories till nozzles rufeses to accept the hrout, including , mixing of materials, mixing of material components (Part a&b) in the required quantities as per manufacturer's instruction by weigh batching. Grouting maintain the pressure at exit (0.5 to 1.0 Kg/ Cm2) by monitoring pressure guage at exit. Grout the material through prefixed nozzles in the structural elements @ 100ml per nozzles. (Beam & columns) complete all as specified and directed.
Material and Labour for applying structural grade EPIBOND-21-LP prior to application of any type mortar plaster confirming to ASTM-C-882-91 (Arizona slant shear test) to ensure bond between old concrete and new concrete) complete all as specified and directed.
Taking down and refixing the shutters exc 1 Sqm but not.exc 2 Sqm Each in same opening each.which includes taking down easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.
Dismentling boarding of any description, fixed in any position with nails complete all as specified and directed.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 for concealed timber fillet etc and making good cutting not exc 10 cm girth as in wall panelling complete all as specified and directed.
Supply and Fix IInd class HW plain fillets square or rectangular in section clean swan secured with nails or brands section exc 13 Sqcm but n.exc 25 Sqcm secured with nails as in wall panelling complete all as specified and directed.
Supply and Fix plywood grade BWP, type BB 6mm thick fixed with screws to timber frame work as in wall panelling complete all as specified and directed.
Supply and Fix 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed witrh screws to timber frame work in narrow widths n.exc 15 cm each rebated or flat edge as in wall panelling complete all as specified and directed.
Material and Labour for preparation of old decorated surfaces of walls by scrapping old paint with mechanically operated steel wire brush, wash the surface throughly and applying two coats of acrylic emulsion exterior grade (100%) (1st coat shall be applied by brush/roller, 2nd coat shall be applied by using spray machine over a coat of primer complete including necessary steel scaffolding + green cloth all round the work side for any posititon/height, complete all as specified and directed.(For bldg from GF to fourteen Floor). [Note :-Necessary safety precautions need to taken before applying paint].
satguruenterprises
K.C.P ENTERPRISES
Anil Industrial Corporation
SHRI SAI ENTERPRISES
ASHOK CONSTRUCTION
SHREE JAGDISH FURNITURE CO.
Unitech Enterprises
SR Construction
Sachin santosh dalvi
SAHU AND SAHU CO.
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .